bokbok_05

Very well said Charlie.

my trigger setup: Koenig hammer EGW sear EGW disconnector 17lbs. main spring Dlask medium trigger

Currently using the DPM with my 1911 double stack .40cal pistol. Compared with the DPM and a 11lbs recoil spring on a tungsten guide rod with 180grs major load (171pf), my shot groups are much tighter with the DPM system. Honestly, I did not notice any much difference in recoil with DPM and the standard setup.

IPSC (PPSA) Standard Division Pistol.

Not a trick Q. I will be away for months and I just want to know or learn from you guys re mag spring maintenance.

Wow!

What do you guys usually do to lengthen the life of your mag springs if its off season or if your planning to take a break from shooting for a couple of months? Do you remove them from the magazine or just keep it as it is? TIA.

Top shelf of a cabinet. Holster hanging freely.

EGW Sear, EE Disconnector and Koenig hammer for me.

For all the Runcam 2 users, how did you mount it to your caps? Appreciate if you post some pics for reference. Thanks....

4.5gr N320 1.180 OAL 180gr teflon coated heads

You can turn the plastic knob clockwise. It will tighten the hold of the holster to your pistol. Counter clockwise to loosen. Also, try to adjust the muzzel support that will entirely insert the knob in the barrel of your pistol. Hope this helps.

Like others said, thumbshield.

Grams springs and followers.

Drooling right now. Awesomeness.....

Fiber optic sights are great. Try them out, you'll not regret it. For me, green is better in sunlight.

That's the beauty of the 2011/1911 platform. You have the opportunity to tinker with it, the joy of tuning it by yourself. Learning new things are fun and enjoyable with a 2011/1911. And did I mention that the trigger on this phenomenal pistol is just....well.....phenomenal!

You can try at Atlas gunworks

I installed EGW Ultimate trigger kit (Koenig hammer, Colt sear spring, EGW sear & disconnector) in my 2011. My gunsmith achieved a crisp 1.5 lbs trigger pull. Still consistent after 2k plus rounds. You cannot go wrong with EGW lightened hammer and Extreme Engineering parts either. Your pick.

Another recommendation is the Safariland 014. Solid locking mechanism, smooth in drawing the pistol, adjustable height and lots of adjustability..thanks to its ball bearing design.

Disabled and pinned for me

GPS Tactical Range Backpack. Try searching BE and the net for its review. You'll not be disappointed.

I'll do. Thanks phoenix...

I think I need to change the title of this post. I am looking what spring and follower that would fit in a hi-cap .40 cal mecgar magazine. Help please. Thanks in advance.