Hitman321

Right. That's what I said. What point are you trying to make?

Dillon 650. I bell right at .025 over resized diameter with Bayou coated bullets and that seems to work pretty well. If I go .005 above or below that, I tend to shave the bullet somewhat.

Just got back from the range with some chrono data on my Glock 26 gen5. I'm working up a reliable IDPA BUG load trying to get close to 95PF. Here's what I got... Bayou 145 RN 2.7 grains of VV320 1.13" OAL Federal Primers 729.9 10 shot average = 105.8 PF (SD of 14.8, ES of 44.1) This load WILL NOT cycle the OEM 16 pound recoil spring but it did cycle a 14 pound reduced power spring with 100% reliability. I don't think I can go any lower than 2.7 unless someone knows where I can get a 10 or 11 pound spring for a G26! Lowest I've been able to find is 14 pounds. 2.8 grains yielded 734.6 average = 106.5 PF (SD of 16.8, ES of 63.2) and same recoil spring results. Kind of surprised by that since I usually see ~25 FPS difference per 0.1 grain of powder on my full sized pistols. Anyways, I hope this helps some other BUG competitors out there.

Just ran across this article in Recoil Web... http://www.recoilweb.com/johnny-custom-glocks-the-glock-whisperer-135606.html Johnny is easy to get a hold of, responsive to texts/email, and does really great work. I've had three triggers done by him and I'm totally happy with the result.

I have the CZC competition rear on my Accushadow with a Dawson .195" tall front. POI=POA at 15 yards with Bayou 160 load making 127PF.

PM sent

Hey Rowdy, I'll take those two 4# jugs of 320 off your hands! PM me.

That's the way mine is set up as well.

This.... http://shop.opticsplanet.com/g-outdoors-products-tactical-range-backpack.html?_iv_code=75-R4-TRBACK-GPS-T1612BPT&utm_source=google&utm_medium=cpc&utm_campaign=plusbox-beta&gclid=CPe0jZr_mdMCFQEmhgodMu8Hlg GPS tactical range bag. I've had mine for over a year. Outstanding quality and highly functional.

PM sent.

Does it fit in the box though as configured???

Went last year and going this year. Challenging stages last year and it was pretty hot and humid. I expect the same this year. I ended up with a DNF since my IDPA "legal" Zev magwell didn't fit in the box on a G34. Yes, I was pretty pissed but ultimately it was my fault for not verifying! They are not releasing the stage cof descriptions ahead of the match this year which seems kind of strange to me. I'm on squad 45. Hope to see you there!

Just ordered two of these for my Scorpion. http://westacholsters.com/products/cz-scorpion-single-mag-carriers They offer a generous 15% MIL/LE discount. Emailed Wesley Slusser who owns the company and he responded within minutes.

Anyone know where to get one for holster production?

Anyone know where to get one for holster production?

+1 on Armadillo

Fellas, I posted my experience with Johnny Glocks based on what it was....very positive. I had no knowledge of past experiences others may have had with him. After watching his numerous videos on YouTube, I believed, and still do, the guy knows what the hell he's doing and made the decision to give him a try. I'm happy I did. Swanny10: Not trying to be elusive. I paid $280. Reason I didn't post that is because I didn't feel like reading the "you're an idiot" comments that we all know would be posted. So let me save you the trouble. It ain't your money and I don't give a f*ck if you think I'm an idiot for spending that on a Glock trigger. When I called him, I didn't get an answer either but did leave a message. He called me back later that night. We had a great discussion about what exactly I wanted the trigger to be like and the ball was rolling. What I got back from him exceeded my expectations. Sarge: No, I didn't get a price break but thanks for questioning my integrity without even knowing me. Bowenbuilt: I know, you warned me dude, but I don't usually let things go! Again, I don't know any of the history here. But Johnny absolutely treated me right. Not sure this is appropriate to share or not and I hope Johnny doesn't get upset with me for doing so but I know he's been battling a health issue the last six months. He won that battle and is now trying to get back into more work. Not offering that as an excuse but maybe that would explain some of the issues others had. Don't know. Again, based on my experience with him, I recommend him. In fact, I like the trigger he did on my 34 so much I'm getting ready to send him my 19. Advice is pretty cheap on here. You can take it or leave it. I don't have any bullshit hidden agendas. All I wanted to do was help my fellow shooters out with some first hand knowledge. Hitman

Only shoot Federal primers. No light strikes so far and don't anticipate any. Check out his videos on YouTube....the man knows what he's doing.

Level III Competition, call him for the price, 1 week.

Just got my 34 back from him and all I can say is "Wow!" Super responsive via phone and very quick turnaround time. What I got back from him was an amazing trigger with zero take up, crisp glass break, no over travel, and a short, positive reset. Basically, everything I wanted my Glock trigger to behave like, he produced. Let me put it this way...a small part of my competitive thinking was reluctant to share how good this trigger is. I'll leave it at that. If that doesn't convince you, word is he does trigger work for some serious big name shooters we would all recognize. http://johnnyglocks.com

Accu9, What kind of accuracy are you seeing with your load below? 147gr Zero JHP 1.10 OAL 3.4gr N320

Put this on the CZ pistol section and decided to add it here as well.... CZ-75 Shadow (#91715) from CZC, all the bells and whistles, factory mags, ~800 rounds through the gun. Working up a load for the Zero 147gr JHP. Arrived at 3.5gr of N-320 which gives me a very consistent (SD of 7) velocity of 887 FPS (130 PF). Max OAL with this bullet was a way long 1.1813 which is obviously not going to work even after subtracting .015 from it. Apparently, my barrel has been reamed at some point but I didn't get an affirmative "yes" from CZC that they were the ones who did it (???). So I started at 1.135 and worked up to 1.155, 100 rounds total, measured each round then shot them in similar length blocks of 10, looking for an obvious increase in accuracy at 25yds. The fun began after loading the magazine with 10 rounds. I tried multiple mags. After 4-5 shots, the cuts on the hollow point section of the Zero bullets would "hang up" and nose dive internally on the magazine notch which locks the mag into the gun. Here's what's making me scratch my head... 1.135-1.1395 No issues 1.141 and 1.143 Hang up 1.144-1.146 No issues 1.1465 Hang up 1.147 No issues 1.1485 Hang up 1.149-1.155 No issues shooting over 30 rounds here The definition of inconsistency! Velocities were essentially the same on all shots but I did see a tightening group at the 1.147-1.148 range. So I guess I'll try shorter than 1.135 and shoot some more 1.147 and 1.150s to see if they remain reliable. Anyone else experience this or have any recommendations/solutions to offer?

CZ-75 Shadow (#91715) from CZC, all the bells and whistles, factory mags, ~800 rounds through the gun. Working up a load for the Zero 147gr JHP. Arrived at 3.5gr of N-320 which gives me a very consistent (SD of 7) velocity of 887 FPS (130 PF). Max OAL with this bullet was a way long 1.1813 which is obviously not going to work even after subtracting .015 from it. Apparently, my barrel has been reamed at some point but I didn't get an affirmative "yes" from CZC that they were the ones who did it (???). So I started at 1.135 and worked up to 1.155, 100 rounds total, measured each round then shot them in similar length blocks of 10, looking for an obvious increase in accuracy at 25yds. The fun began after loading the magazine with 10 rounds. I tried multiple mags. After 4-5 shots, the cuts on the hollow point section of the Zero bullets would "hang up" and nose dive internally on the magazine notch which locks the mag into the gun. Here's what's making me scratch my head... 1.135-1.1395 No issues 1.141 and 1.143 Hang up 1.144-1.146 No issues 1.1465 Hang up 1.147 No issues 1.1485 Hang up 1.149-1.155 No issues shooting over 30 rounds here The definition of inconsistency! Velocities were essentially the same on all shots but I did see a tightening group at the 1.147-1.148 range. So I guess I'll try shorter than 1.135 and shoot some more 1.147 and 1.150s to see if they remain reliable. Anyone else experience this or have any recommendations/solutions to offer?

CZ85Combat, what are you using under those MG124's? What OAL? Was this off a rest or free hand?

Decided to go the same route you did Raven. My 75 Shadow is being built and Stuart was kind enough to indulge me on this sight option. Only difference is I'm going .150 wide and .130 deep on the rear. Same front as you did for the older eyes!