Jump to content
Brian Enos's Forums... Maku mozo!

MJinPA

Classifieds
  • Posts

    328
  • Joined

  • Last visited

Everything posted by MJinPA

  1. That’s all I got. I’m not a machinist or trained gunsmith so definitely interested to see what one thinks about the cracks Sent from my iPhone using Tapatalk
  2. Both cracked back to back?!? Any chance something changed with your load? I would think you’d know if it was a double charge but if they cracked back to back that’s definitely my initial thought. Sent from my iPhone using Tapatalk
  3. Unless you really know what you’re doing, building out a 9mm AR with a standard lower will likely cause a lot of frustration trying to get it to run reliably. Either buy a complete rifle from JP, MBX, Sig, or even the Ruger PC9 or build it with a 9 mm lower. Sent from my iPhone using Tapatalk
  4. This tip was super helpful! I have 500 (+a handful) of SC and only about 25 Super. I’m going to post the SC in the classifieds if anyone that helped out here is interested. Sent from my iPhone using Tapatalk
  5. Yes. Sounds like I’ll have to sort [emoji22]This must be why 38 super shooters walk around looking like they lost a contact lens after shooting a stage. Sent from my iPhone using Tapatalk
  6. Maybe there’s a slight difference. So glad I don’t shoot this stuff. I’ll probably just selling as a mixed lot at a discount. Sent from my iPhone using Tapatalk
  7. I’m not seeing a difference. Sent from my iPhone using Tapatalk
  8. I have a bunch I’ve collected over the years that I plan on selling at some point. My question is...does it need to be sorted for the buyer or is it interchangeable? I can’t see any difference in the case besides headstamp. Sent from my iPhone using Tapatalk
  9. General fitness/weight training is important but you can also work in some movements that focus on the muscles you use when shooting. To do this, I will occasionally use a 10lb dumbbell that I grasp as close to a pistol grip as I can get and work wide transition and keeping the “gun” up when entering positions. Sent from my iPhone using Tapatalk
  10. I'm thinking about getting mine milled for CO but it sounds like a one-way street (not able to legally go back to USPSA production). I called CZC yesterday to get their input hoping I could use this https://czcustom.com/rds-plate-fixed-shadow2-sight.html but the sales person I spoke was not 100% sure if they could mill it light enough without making through cuts to the slide. Has anyone come up with a solution that makes CO weight and uses the CZC rear iron sight plate to go back to production?
  11. Thanks for the replies. I also got clarification from Troy on this. However, the person that setup this particular classifier saw PP in the stage procedure (not briefing) and assumed pepper popper which was thought to be a full size popper. I also just realized that when viewed in the app is states PP 1-4 but when viewed online it uses a single P. Granted we should all be more diligent when setting up classifiers it should be an easy fix to make the version viewed in the app mirror the version that's online.
  12. At a recent club match we had a classifier that was set up wrong (18-05). Full size poppers were used instead of mini. Was not noticed until a few squads shot so had to be tossed. The stage procedure refers to them as PP and in the scoring section they are called mini poppers. I have also seen mini poppers called USP and MP in stage descriptions. Is there a standard? I could not find one in the rule book. Sent from my iPhone using Tapatalk
  13. I have a fitted single sided as a spare but they just look odd on a 2011 frame. My current hack job functions fine but it's a hack job with smoothed edges. And, we all know that looks matter in the gun games!
  14. This is probably what I'll end up doing
  15. That SN sure looks familiar AJ's old gun? I'll have to check it out at the next local. Ameet, right? This is Mike McKerns...Doesn't look like Atlas sells their safety's on their website.
  16. I need to fit a new safety for an sti edge and want the lowest profile for the right side. Currently have an egw. I cut the right side off because I would occasionally engage it while reloading. It looks a little goofy but they also look goofy without an ambi safety. Akai guns seem to be very low profile on the right side. Anyone sell these or are they being shaped with a dremel? Sent from my iPhone using Tapatalk
  17. I vote for OAL too. I load to 1.18 for my Edge. The only time i had a ftf was with factory length ammo Sent from my iPhone using Tapatalk
  18. Following Sent from my iPhone using Tapatalk
  19. MJinPA

    Shadow 2

    Same here at about 8k rounds on the original and minimal wear. I also use the blue Wilson in my 2011. They recommend changing after 1500 rounds. I normally swap around 5k and I’m sure it could go much longer. Sent from my iPhone using Tapatalk
  20. I hear a lot of people say that they want to shoot a gun in competition similar to what they carry but I think that if you shoot enough, it shouldn’t matter. I shoot a 2011 in uspsa and draw from a dropped/offset strong side holster and I carry a Glock 19 in an appendix holster. Hope I never have to find out but doubt it’ll be the reason I get killed in da streets Sent from my iPhone using Tapatalk
  21. Well said Sent from my iPhone using Tapatalk
  22. I can’t tell if you’re busting chops or serious with the slow is smooth/fast comment. Slow is always slow. You should shoot as fast as you can see and move at the limit of human function when doing everything that is not shooting so you can get back to shooting as fast as you can see. Sent from my iPhone using Tapatalk
  23. Ours are all outside but the question came up this weekend and we realized no one knew for sure. Sent from my iPhone using Tapatalk
  24. When a 3x3 box is designated for a classifier, is it measured from the inside or outside? I don’t see it specified in any classifier stage briefings. Using a box made with 2x4s makes for a big difference Sent from my iPhone using Tapatalk
  25. This happened to me just yesterday in Steve Anderson’s class. We were doing a shot calling/transition drill on steel. Goal was to keep shooting left popper right popper back and forth until you missed. I reloaded after 20 hits and as soon as I thought “damn! I’m still going strong” I missed. 24 total hits. Nearly everyone in the class had a similar experience. One they started thinking about the shooting instead of just staying in the moment, they missed. Sent from my iPhone using Tapatalk
×
×
  • Create New...