mikeyjones

Thank you! Sent from my iPhone using Tapatalk

Kind of a random question/request. Anyone with an Ammobot autodriven 1050, can you please measure the height of the entire setup to the top of the case feeder? In my current reloading room, I'm limited by the height of the ceiling so I'm debating making my bench shorter if I need to fit this on there. Any input would be greatly appreciated.

I don't know why the 5" ppq doesn't get more love. It's a great pistol and the mags are 15 rd. Sent from my iPhone using Tapatalk

Back in business!! Sent from my iPhone using Tapatalk

Still not for me.

Interested in details, when is the match? When does registration open?

Curious as well.

Any links? @Brassaholic13 - Any pictures of the new adapter with 4 holes?

I came across those and they're the most economical option thus far. Does that keep the gun legal for production? Still fit in the box?

Bueller....

What is everyone using? I'm trying to find some decent ones that won't break the bank to be able to use my new toy in production. Any suggestions?

Still not working for me.

Following this thread. I can't log in either.

I still can't log in via tapatalk. Is that a known issue?

In other words precision. Sent from my iPhone using Tapatalk

So I don't follow. The post above says you only use a little car polish when tumbling. Now you're saying you use a release agent. Sent from my iPhone using Tapatalk

Have you ever loaded rifle? I've never lubed pistol but rifle is impossible without lube. Sent from my iPhone using Tapatalk

I just ordered the spill stop today. On both the 650 and 1050, I always have a crapload of powder after loading 9mm. Hopefully this helps.

It sounds like the same thing. I currently have a very similar process. Except I use imperial case lube instead of Dillon. Might make the switch to a liquid lube. Sent from my iPhone using Tapatalk

I came across something on eBay that's marketing itself as an automatic case oiler. Basically its a case feeder tube with 3 wheels and a small dish that you put lube into. So as the case passes the wheels they get lubed. Curious if anyone has tried on their 1050s? Wouldn't mind automating that part of my loading. Sent from my iPhone using Tapatalk

Interested in this as well, following...

I've done this many times, works just fine.

What are the advantages of the boring bar and carbide insert over the end mill you ask? When an end mill dulls, it has to be replaced and thrown in the "to be sharpened" stack. When a new end mill is installed, the depth of the end mill has to be exactly where the last end mill was removed from. If not, the die cutting depth will change, and as such, the die will have to slightly be raised or lowered in the tool head to accommodate this change. With a boring bar, when the carbide insert dulls, all that has to be done is to remove the Bosch motor from the trimmer adapter, remove the TS6 screw, and either rotate to a new cutting edge (there are three) or replace the carbide insert. Reinstall the motor, and verify that cut length hasn't changed.

Curious as well...

Seems like it's cheaper to get some dedicated web space somewhere. Can get a VPS for around $5/month.