Manwithnoname

I have both the sig armorer trigger and a GG factory competition installed kit. On my original X5 with sliver barrel, I have the GG installed tigger. After the drop recall, I had to send it back to GG for a redo. The trigger is around 3lbs and has shorter over all travel than stock, with a little over travel. The break is more of a roll than a glass rod. My other X5 is the second gen X5 with the black barrel and has the TSA installed trigger. There is minimal take up, breaks crisp and clean, has almost no over travel. The TSA trigger feels slightly lighter than the GG trigger. It’s the best striker trigger I’ve ever felt or used. My primary gun has the TSA trigger in it. I can shoot 1.9 bill drills with both guns. At match pace, I can’t tell the difference in score. My head tells me I like the TSA more.

I agree. I would like a grip where you could use 2011 Magwells. That way you could choose weight and size.

When I got my tungsten grip I was having bad muzzle dip. I tried tungsten rod and no tungsten rod. Not having the tungsten rod made a little difference, but not much. I did some slow mo and with the help of a friend, figured out my recoil spring was too heavy causing the dip. I went from 14lb testing each lb down to 11lb. The first few shots with the 11lb spring felt like a malfunction because it was so soft. If someone is getting dip with a tungsten rod, I’d bet it’s because of over springing.

Sorry about that ! Great gun right there.

First off the X5 doesn’t come in .40. For my p320 limited build, I got the 18 round mags. The 18 rounders are the same size as the 21 round 9mm mags. I used my 140mm base pads and exact same grams springs and followers from my CO X5 for 20 rounds reloadable. Any 140mm bade pad for the X5 will work on the 18 round mags.

I am running a Wolff 11lb spring. I haven’t had any malfunctions and it’ll cycle with a 23 round mag at the start of stage. I run 124 grain 130 pf ammo.

It looks like I was wrong. Below is the correct plate. http://www.chpws.com/product/sig-p320-x-five-legion-rmr-sro-holosun-407-507-508-adapter-plate

For those of you concerned about the gap when mounting the rmr or sro, Chpws made a filler plate with legs to support the rmr footprint. I was concerned just screws wouldn’t hold. Looks like I’ll get a legion and sro to try out now. Go to 1:30 for the plate info. http://www.chpws.com/product/sig-p320-w-r1p-dpp-cut-w-rmr-holosun-holes-filler-plate-for-rmr-sro-holosun

I have a P320 full size GLS holster. I have used my X5 with optic mounted in the GLS and it works just like the full size does. I used it with the X5 for a class where I would be getting in and out of cars and getting into weird positions. Because of that I wanted some retention.

I’m just saying if you need anything else I would prioritize the XTG module as last. It’s nice, it’s not the end all. Granted, this is my opinion.

This is my FS 40. It shoots factory and reloads out to 1.15 100% reliably. Using factory 18 round 40 mags, I get 20 reloadable with grams springs and followers with springer base plates. It’s as accurate as any other 320. The light is a broken TLR-1 with brass rods cut down to the Same size as CR-123s.

I have one I am using in my regular X5. The plastic is noticeable softer than a regular module. At first I had one mag out of the 8 I use stick when I hit the mag release. After use and dry fire, I don’t get that anymore. I’m still playing with going between the tungsten guide rod and steel. I think the steel might be better with multiple shot dot tracking for me. I wouldn’t want the X5 to be any heavier with minor ammo. I superglued and heat gunned grip tape to the module. I haven’t had any issues with the grip tape moving around. Overall I like the way it feels while shooting. I would get a grey guns trigger or back up gun before getting the XTG.

Just add magwell and 170mm mags...... poof......... you’re a insta Open minor GM! Watch out Ben and JJ.

12 yards too.

Does anyone have a link to this break / barrel setup !

I agree about the price being high with other options out there. I had MP5s in the past and sold them. They shoot great, they don’t have good ergonomics. An MP5 with AR ergos would be the best PCC in my opinion. All other threads or comment sections say the same thing - it’s too expensive. It’ll be interesting to follow this.

https://angstadtarms.com/mdp9/?utm_source=newsletter&utm_medium=email&utm_campaign=mdp-9-intro

Sounds good. I had my two original (sliver barrel) X5s milled for DPP and tens of thousands of rounds on each with no problems. I know someone who dropped their legion X5 with SRO on springer plate in the case and cracked the lens. Also, another buddy has had nothing but battery problems. But, I’ve heard of issues with each brand, like you said.

I’m just wondering, why not Delta Point Pro?

and the ability to mount 2011 magwells.

Is he using factory ( factory length) or long loaded ammo? I had that issue with long loaded ammo for an STI 1.180”. If I use 1.15” or factory ammo I do t have any issues. I’ve only used the 18 round mags with springer base and grams internals. I get 20 reloadable with that setup.

I sold two 2011s to go to 320s for CO and Lim. I use a 320 with x grip for work. Playing with a 320 has paid greatly for my performance with the work gun.

Yes, I chassis between CO setup and limited major.

I use the 18rd tube with grams spring / follower and springer basepad for 20 rounds easily reloadable. It’s not too hard to load the mags with the basepad.

No, mine fits fine. There is a bump holstering and unholstering. I’ll try and take a pic tomorrow. My comptac is an old 320 version I modified to take the X5 when it first came out and no holsters were available for the X5.