Jump to content
Brian Enos's Forums... Maku mozo!

mveto

Classifieds
  • Posts

    548
  • Joined

  • Last visited

Everything posted by mveto

  1. I had an issue one time where the spacers were actually smashing as I was tightening the screw, it felt like I couldn’t get it tight enough because the spacer was deforming. The material of the spacer was definitely not correct, never had that issue again once I replaced the spacer.
  2. All the clubs I shoot at only use tape, the only ones using pasters are the ones bringing their own tape guns. At our majors they have pasters but the rolls always seem to disappear when the match is over, never to be seen at the club again for locals.
  3. I prefer a 124 over a 147 for sure, I like how the sights return quicker and the more snappy recoil of a 124, but in my Shadow 2 and Bull Shadows I shoot a 135tc from blue bullets.
  4. I just ordered a Lytton Customs for mine earlier this week, he says turn around is 2-4 weeks so hopefully I’ll have it in no more than a month, it’s a bit pricey but I really like the look of it and he has been really response to calls.
  5. Here is a side pic for yeah
  6. I’m in the process of building out a P320 X5 and am going to be ordering the TSA kit, the few videos I’ve seen it really looks like a great kit plus it looks like they recently lowered the price a bit so that’s a plus as well
  7. It’s actually pretty nice, I have one but won’t be using it as I’ll be switching platforms next year though. For me it really helps get my support hand indexed properly. There are a few companies that make holsters for it, the Ghost Hydra P/P+ work. I was able to get a custom holster made by Steadfast Holsters that is designed specifically for the Tevo Thumb Lock, it uses the Boss hanger with 3/4” spacers and is within USPSA rules.
  8. I prefer 135’s as well, very good recoil impulse and for me the dot tends to track a bit better over 124 and 147 for som reason
  9. I really like my LYNX belt, it relieves the pressure on my back and hips that other belts caused, it’s stiff enough to that I don’t need to make it as tight as normal belts. Only issues I have are more related to the inner belt and how quick the LYNX belt wrecks the velcro on the inner belt
  10. I’ve been using blue 135tc’s .356 for the last few years they’ve been very good out of my CZ’s, load them at 1.125 with 3.6 grains of clean shot, makes 129-131pf depending on the gun. Only issue is they did change the mold awhile back so it did mess up my load a bit. New profile on right
  11. The top screw on the trigger (pre travel screw) has backed out not allowing the trigger to move far enough forward to allow the trigger bar to reset properly turn it in (tighten it), that should solve the issue
  12. I would say it’s the pre travel screw, it’s come loose and started to back out not allowing the trigger to reset. Saw it happen to a friend a few weeks ago at a match.
  13. 135 TC with 3.6 clean shot at 1.125 I like the feeling of it over 124’s and 147’s
  14. I used a dremel with a fine diamond bit at the lowest rpm. It’s worked great on the couple discos I’ve fit
  15. Heat and a good quality torx bit, I’ve always used a lighter to break up any loctite before removing the screw.
  16. I am using the CGW hybrid disco T6, not really sure about your original question though, the trigger does have a pre travel screw do it can be adjusted based on the reset.
  17. Anyone using the DAA Lynx belt find an inner belt that has a higher life span, I’ll soon be on my third inner belt, just want too see what everyone might be using.
  18. I run the diodes on the bullet feeder but not case feeder, otherwise it produces to much noise, only issue is that my first set of diodes for the bullet feeder didn’t even last 10k rounds before it went out. If you’re using them and all the sudden the bullet feeder won’t stop when the tube is full the diodes are bad. Had to call and get a new set sent out under warranty. I’ve actually got all the parts to make new ones just in case I never need another one.
  19. I’ve been running 3 of these for a few matches now, they are great, switching from the DAA Xi’s, the release is so much smoother just grabbing the mag is more natural. I have mine set up so the mag sits in the lowest position, the quality of these are great just like the holster hanger which I highly recommend as well, just wish they came in the same colors as the base pads.
  20. In my Bull Shadow I’m running 135tc Blue’s with 3.5gr of clean shot. Accurate enough for my shooting
  21. I felt the same with my SP01’s, 124s are snappy, 147 are slowish feeling. I settled on 135’s they have been excellent out of my SP01’s and Bull Shadows.
  22. The Dominate Defense belt is very stiff as well and the ratchet buckle is nice for adjustments and making it easy to go on and off. I also really like DAA mag pouches I currently use the Alpha-Xi pouches. They have great adjustability which is nice, not stuck with bullets forward or out, it’s nice to be able to try both. I will say that I am going to be purchasing a LYNX belt once the color I want comes back in stock.
  23. Same for me as well, been 100% reliable over the last 3 seasons.
  24. You could always try the ffb swage backup/case expander rod. It’s a much better expander/hold down than the factory, I can use the Dillon universal powder funnel and flare to .383 and get no bullets tumbling after the MBF. It’s been great so far. https://fastandfriendlybrass.com/shop/category.aspx?catid=23
  25. I’ve see about a 3-4pf difference in 40-100+ deg temps. NorCal weather can be strange. My cold weather pf is 131 and about 128-129 in the heat.
×
×
  • Create New...