koteris
-
Posts
74 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by koteris
-
-
I like broadside’s fly fishing idea. I don’t do it myself, but the skill involved and the outdoor part definitely appeal.
-
Billiards can be practiced at home and allows for local competition. It even has a “classification” type of skill rating system.
If you are near water, there are usually competitive rowing or outrigger paddling clubs that offer weekly practices and occasional competitions.
-
I've never shot a match like that, but it looks pretty interesting. It's kind of hard to tell much from the diagrams, but I do like movers and ispc targets. Mostly because I don't see them very often here. I never really thought about comparing the match entry fee to the round count, but I do like matches that have a distinctive style, so I would probably go if I could.
-
It’s actually a choice within your color options. Black heavy duty I think it is called. I did the thinner version which may have been a mistake, but it seems ok.
-
I just did the r/c owb quick ship holster from JM Custom Kydex for $42. Nothing fancy or double layered, but it seems to work well.
-
I managed to get a box. $66.90 to my door......Yikes! Oh well.
-
Did a little mallet testing of my own with primed cases and the springs and FP I had on hand.
CZC extended FP with rami FP spring - ignition with mallet. I can confirm that, with the 11.5lb mainspring, the hammer rests on the slide, and the tip of the FP extends past the hole.
Stock FP with rami FP spring - NO ignition with mallet. This might be the best scenario, as the tip doesn't extend past the hole, but the hammer is still resting on the slide with a 13lb mainspring. This setup lit off CCI with a DA pull.
Stock FP with stock FP Spring. - NO ignition with mallet. The stock FP spring does hold the hammer off the slide however (if it matters). Even with a 15lb mainspring. This setup lit off CCI with a DA pull. DA pull was 8lb.
-
Just sharing some Sport Pistol info from my chrono session this morning. Felt soft and the 25yd freestyle group was all in the head of a USPSA target (not the A box, but I'm not that capable).
CZ Shadow 2
RMR 124gr FMJ Round Nose
1.097 OAL
3.8 Sport Pistol
CCI Small Pistol Primer
.378 Crimp
Mixed range brass
52°F
Avg PF: 132.37# FPS PF
12 1043 129.33
11 1070 132.68
10 1076 133.42
9 1083 134.29
8 1066 132.18
7 1060 131.44
6 1063 131.81
5 1060 131.44
4 1070 132.68
3 1073 133.05
2 1060 131.44
1 1086 134.66 -
Sapoutfitters has the receivers.
-
I just buy 10/22 receivers from S&P Outfitters.
-
I like my Berger Precision one a lot. I ordered through facebook.
-
I think that is the 507C.
-
Maybe....
your stiffest belt $0
2 RLN pouches $35
Safariland 5197? $35
-
I use ACME. I like the new profile version 124, and their shipping is real fast.
-
De-cocker is fine for make ready. I've never had an RO make me lower the hammer by hand. After the stage, I'm pretty sure you have to pull the trigger.
-
The CZ-USA P10F's seem good to me. I don't have a ton of rounds through mine (maybe 800), but no problems yet.
I got my optic plates from czcustom and they are working great so far. They might be out of plates at the moment, but I think they are making more all the time. I did the email notification and ordered right away.
-
I have that combo and use it in a P09 shooting limited minor. I can confirm 23. I reload to a 22 just to make it easier to seat the mag during a stage.
-
OEM P09 on the left, OEM P10F on the right.
-
2 hours ago, bimmer1980 said:
Thank you for your review! Did you experience any snappyness? How does it behave in recoil?
That thin magwell sucks
It seemed tiny bit snappier than my P09, but it also seemed like it settled faster....like maybe the slide is lighter but moving quicker? I am also really used to the P09 grip shape, and might be dealing with the recoil better. Anyway, I thought it behaved very nicely and I was able to follow the sights pretty well for my skill level.
I looked at the magwell a little closer. It is just thinned out where they scalloped the outside of the grip to allow people to tear out a stuck magazine.
-
I have a P10F optics ready. I have not shot it in a match, but I have put about 300 rounds through it at the local square range. Keep in mind that I normally shoot a P09, so I don't have any way to compare it to any of the nicer metal framed guns. I am also a lowly C class, limited minor shooter, so my opinion could be suspect on all sorts of stuff.
I think the fit and finish is amazing, but I have only seen my own.
I tried 3 different bullet weights and they all shot fine. The chamber is still kind of short. 124gr round nose blue bullets loaded at 1.12 don't seem to plunk and spin freely.
Accuracy seemed great shooting dots at 7 yards, and A zone at 15. That is as far as my local indoor range allows.
Trigger is ok. 4lbs 12oz in multiple tests. If I pull really slow it has a little hitch in the short creep between the wall and the break. That is probably just my gun and I don't notice it when shooting with any kind of speed. I assume it will go away or I can polish it away. It might be annoying on distant difficult shots.
The guide rod is shorter than a P09 and longer than a P07 at 3.4545 inches. Mine is metal with a flared front to capture the spring, and what looks like a removable rear that takes a 5/64 hex key. Spring diameter looks the same as OEM P09 and I use Glock 17 ISMI springs in that gun with no problems.
Magwell is pretty thin on the sides. I think it might get chewed up pretty fast with reload practice.
Over all, I like it a lot. I think it will be fun to try carry optics when they start selling the adapter plates. Let me know if you have any other questions.
-
1.11 for a P09.
-
I tried some sport pistol with 124gr bullets yesterday. Results are below.
CZ P09 (4.54" barrel)
9mm Acme 124 Grain RN-NLG Coated (new profile)
4.0 grains Sport Pistol
1.11 OAL
WSP
.377 crimpTemp: 48°F
Altitude: 70.00# FPS PF
5 1101 136.52
4 1097 136.03
3 1091 135.28
2 1088 134.91
1 1094 135.66
Average: 1094.2 FPS
SD: 5.1 FPS
Min: 1088 FPS
Max: 1101 FPS
Spread: 13 FPS -
I’ve tried most of them. Finally settled on the rockyourglock extended gen4 release with their reduced power release spring. Works great for me, and pretty inexpensive.
-
I only just started using them, but so far, the Acme 147 FP-NLG has been real nice. It allowed me to increase my OAL a bit and is very accurate.
Competitive Carry optics gun for "short thumbs"?
in USPSA/IPSC Shooting
Posted
The Walther PPQ M2 family of pistols have extremely accessible controls. Almost too close for my liking, but give them a try. One of those steel PPQs would be competitive for sure.