Jump to content
Brian Enos's Forums... Maku mozo!

kk4364

Classifieds
  • Posts

    448
  • Joined

  • Last visited

Everything posted by kk4364

  1. If it I recall the sps grip has a magwell built into the grip, so the msh would not be interchangeable. Sent from my SM-G950U using Tapatalk
  2. I have small hands as well I went with a Lone Star Innovations tactical wide ambi safety fits perfect as is. I do like the amount of material to rest my thumb. Sent from my SM-G950U using Tapatalk
  3. I had a para p16 that fit nicely in my old racer holster didn't fit perfect but could of used it. Also tried it in a Guga Ribas Ernie hill holster that one worked better. Sent from my SM-G950U using Tapatalk
  4. Smooth an Sti stock grip and use grip tape great set up! Sent from my SM-G950U using Tapatalk
  5. I started off with a loaded glock 34 and traded it to another Enos member for a 2011 slide, fit to frame, with a barrel fit. I am by no means a smith and not super mechanically inclined. I was laid up, partial foot amputation. I ordered what I could, when I could afford it. Long story short after watching several videos and asking several annoying questions I ended up with a gun that runs super reliable. As far as gear I bought what I could when I could, holster, some parts and magazine parts found on Enos. Next was a big step for me, I purchased a dillon square deal b in 40 s&w and started loading, so far so good. Sent from my SM-G950U using Tapatalk
  6. Depending on your oal i would start at 4.0 and work up slowly. My 2 cents. Sent from my SM-G950U using Tapatalk
  7. My go to load sti 5" kkm barrel 180grn jhp over 4.9 grn hp38 loaded to 1.150 average about 173 pf. Sent from my SM-G950U using Tapatalk
  8. Not sure if this will help but, I ordered and installed a rear sight for my 2011 pistol that had bomar cuts with no tapped hole for bomar. The Fusion rear sight has been flawless and appear to be pretty well made. I wouldn't hesitate to get another one. Sent from my SM-G950U using Tapatalk
  9. Out of my SVI 5" bull barrel iirc wwb 165 grn made about 173 pf Sent from my SM-G950U using Tapatalk
  10. I have used Winchester white box 165grn for local matches and nationals ran great and make pf. Sent from my SM-G950U using Tapatalk
  11. Awesome! Sent from my SM-G950U using Tapatalk
  12. At least that's what I think the issue is. Lol Sent from my SM-G950U using Tapatalk
  13. This black 180 grn flat point bullet I had the same problem with loaded to the same length as a 180 grn Hornady Hap . Hard to see in the pick but the shoulder of the bullet before the flat point would hit the rifling in my Kkm barrel. The Hap I can load out to 1.12 + the black would have to be run at about 1.140 . Hopefully that helps. Sent from my SM-G950U using Tapatalk
  14. I 2nd most likely due to bullet profile. Sent from my SM-G950U using Tapatalk
  15. For what it's worth I just picked up an ambi tactical wide paddle for my limited gun from lone star innovations fitment is perfect it is available in ambi tactical not too wide. Sent from my SM-G950U using Tapatalk
  16. Iirc Winchester white box 165grn made 172pf at 2016 nationals out of my 5" Svi swat pistol. Sent from my SM-G950U using Tapatalk
  17. And I don't ever remove the set screw because I'm afraid of stripping it. So I just back it off Sent from my SM-G950U using Tapatalk
  18. It's a snap on interior tool. Sent from my SM-G950U using Tapatalk
  19. Use something with a thin wide profile, open it enough to insert and catch a part of the spring and use force to push spring. This is what I use. You get the idea. Sent from my SM-G950U using Tapatalk
  20. Very nice pistol! Sent from my SM-G950U using Tapatalk
  21. If you were able to take the pistol apart, I would say throw the new sear spring on and test function. If it passes safety and function test win win. Sent from my SM-G950U using Tapatalk
  22. For what it's worth I purchased a new svi trigger new with short flat trigger pad , removed the trigger pad from the bow, took an Sti plastic trigger pad off of the bow and swapped trigger pads to bow. Then used a file and then sandpaper and fit the trigger pad to the Sti grip. Works great. Sent from my SM-G950U using Tapatalk
  23. Not 100% sure the cost of parts and shipping, mostly shoo___conn__ctio_ and d__wso_ if you look at most 1911 builders sights they lay out the price for fitting everything from a front sight to an extractor to a thumb safety. So I figured I saved myself several hundred dollars and most importantly gained the knowledge, and satisfaction. Feels pretty good to run the gun you built. Sent from my SM-G950U using Tapatalk
  24. I am not a gunsmith nor claim to be. That being said I used to tinker with glocks part by part I traded one for a 2011 slide, frame and barrel that were fit, I ordered all the other parts and started tinkering and ended up with a 100% reliable limited blaster. I will admit at 1st I was worried I wouldn't be able to do it but after I started working on it I found a bunch of help here on Enos and several other sites. So now not an issue to fit parts and take the gun down to separate parts. It has been a great experience. Best of luck any way you go. Sent from my SM-G950U using Tapatalk
  25. Still a great deal love the fish scales . Have fun shooting! Sent from my SM-G950U using Tapatalk
×
×
  • Create New...