Jump to content
Brian Enos's Forums... Maku mozo!

RichJacot

Classified
  • Posts

    128
  • Joined

  • Last visited

Everything posted by RichJacot

  1. The bearing and detent ball stopped my powder spill.
  2. I think the cut-out one is for .223 to .300blk. You can use the std. one for .223.
  3. This is what I use: http://www.homedepot.com/p/Power-Care-LG001PC2-Grease-Gun-LG001PC2/203555748?keyword=chainsaw+grease If you have trouble with the link just go to Home Depots website and search for LG001PC2 and you should find it. I've been using one of these for years and they work great.
  4. I process my brass .223 first (because I trim it), but not 9mm.
  5. Very Nice! I especially like the strap that keeps a case from being loaded.
  6. The very first time I completely stripped and relubed mine, it took 2-3hrs. I bought it used so I did it first thing and it was already unmounted from the bench. That time includes completely cleaning/degreasing all of the needle bearings after disassembly. I don't expect it to take more than two hours the next time though.
  7. Hello, I'm not sure if this is the correct location or not but I'll be traveling to Phoenix, AZ again on business the end of next week. The last time I was there I visited the Dillon location and I was wondering if there were any other firearms related businesses worth visiting while I'm out there this time? My work will be happening mostly after hours so my days, Thursday and Friday, will be mostly free. TIA
  8. x2 The spring looks damaged. Your spare parts kit will have a spare.
  9. I also have 2 x 3/4" sheets of plywood glued and screwed together with a at 2x4 frame. That is then screwed to the wall and concrete floor and it is very very solid. The two sheet you suggest is sufficient but it depends on how you secure that top. ;-) If your top is the right height for you, no strong mount will be needed. I have the roller handle and love it. I would suggest adding the foam cover on it though. As nice as the roller handle is, the foam cover makes it that much nicer.
  10. I also have a 1050 and 650 (with a bullet feeder on both). After using both for multiple calibers... my 650 now sits dedicated to 9mm, with a bullet feeder of course. ;-) I can't say I was planning it that way when I got my 1050, it just kinda ended up that way. I don't have an issue priming with the few crimped 9mm I get. Yes, I may have a crimped case/primer issue with 1 MAYBE 2 primers out of 1000-1500. IMO swaging is a non-issue for that few. As for priming on the downstroke, I've never had an issue with the 650's forward stroke. IMO it gives you more "feel", while priming, so when you hit those few crimped ones, you can feel it in 99% of the time. Some other thoughts to maybe help with your decission... My 1050 has the Ponsness/Warren auto drive with the 900 RPH gearing. When my wife is loading .223 on the 1050 and I'm on the the 650 loading 9mm, I can load about 20-25% more/faster than her at the 900 RPH (the 900 RPH for rifle is plenty fast enough for me). As I've seen other here say, the 650 is a beast with a bullet feeder. Good Luck in your decision. Either way welcome to the Blue! lol
  11. x2 I've had my 650 for 25+ years and and am pretty much the same boat as you EEH. I'll add that I had the ejection wire issue but only AFTER I put the bearing kit on my press so IMO that doesn't count because "I" modified the press. Once I did the bend it's been 100% again though. ;-)
  12. They do have rings for coated bullets. I'm using one now. That's why I say call them when ordering. Not everything they offer is in the drop downs.
  13. If you're only loading one cal. or only need the bullet feeder for one cal., I would also recommend GSI. Mine has been 100% and I also like being able to keep the powder check station. I have the GSI feeder on my 650 and Mr. Bullet feeder on my 1050. If you do end up getting the GSI the only recommendation I have is that you call when you order to ensure you get the exact ring you need for your bullets. Their dropdown doesn't have all of the options they offer.
  14. Well if your tube outlet is on the same circuit as your reloading room/area, you could put a GFI outlet next to the tub. ;-) lol
  15. Change the breaker for that circuit to a regular breaker. ;-)
  16. With no primer change and have you have the different toolheads setup... it's about 10 mins. Add 4-5 mins to do the primer change too.
  17. I've also switched to the Armor-All wash and wax but I don't think I have the qty right. I'm using about the same amount as I was when using Dawn. How much are you using Jim? TIA
  18. x2 on calling Dillon. That's pretty bad. Mines never done that before.
  19. In my experience they're a great company to deal with. They've been very helpful with any questions/issues I've had and always make things right.
  20. Having the correct ring is key. I found out that they have several more than the ones listed in their dropdown options. I'd give them a call with the ring you have and the bullets you're using. I'm sure they'll fix you right up and you'll be going in no time.
×
×
  • Create New...