jtrump

Thanks, They came back in stock pretty quick. CZ told me they had no ETA ;(

I've used the different size targets for awhile, how would one focus on speeding up transitions in dry fire.. it feels like I'm only able to practice that under recoil when I can ride it.

I bet everyone wants to be on your squad at matches...

Did not know that, Thanks RennBaer, I will look into it.

Anyway, If anyone has a bead on a plate that is in stock somewhere or knows of a lead time I would greatly appreciate the heads up.

They are just words bud; you knew what you were doing. Don't try to be slick with words :), helping would have been like hey here's the link to some in stock "that you said you found" I did an extensive amount of googling and I found none outside of the ones in Canada that won't ship to the U.S.

Sigh.. Literally Larry over here.. Yes, they can be found online; if I go sit in a safe area long enough one might end up there also.. The fact that they are sold out everywhere, except a few stores in Canada that Won't ship to the US, yea id say that means they are pretty non existent at the moment. CZ also says no eta.

That's a great looking Pistol you have there sir. Pretty much would want to run this exact same setup.

So, I can't find an optic mounting plate anywhere for the shadow2 for RMR/SRO footprint.. Does anyone know about how to fix this problem :)?

I just learned about the reach reduction kit today, I'm super unfamiliar with CZ pistols; I don't know how I feel about taking anything apart lol. That's what interests me so much about like the TS pistols, but none of them are optic ready and it really sucks or I would go that route.

Ok; Just making sure. I was just reading a post about specific rules, and an RO making people start hammer down: Maybe he didn't know the rules completely. The biggest thing for me with the DA pull on the shadow 2, I have small hands, reaching the trigger in DA it's hard for me to get enough pad on the trigger. The other unicorn in the room is finding a dang optic mounting plate for an SRO.. they seem to be non existent. Thank you all for the replies.

Guys, I've looked around and read some posts about the rules and I'm not 100% confident. I'm hopping back into uspsa and I want to shoot LO, I left the game shooting single stack/production. I was looking at a few different pistols, and I would really like to shoot a shadow 2; "I know there is a SA only model but it's like a damn ghost" So my question is, can you run a regular shadow 2 in LO so you essentially don't have to do the DA pull?

FOP 113 or Ancient city shooting range.

All of my glock mags fall freely from my JP, even when it was brand new. I would probably call support and see if they can remedy it. There is no reason for you to me dealing with an issue like that.

Ron Faircloth runs the place now, he's doing a great job. From the last time I spoke with him which has been sometime... there was still going to be a wait list which could have changed. But I know for sure they did away with the sponsorship deal which is nice. It's certainly more economical to shoot at FOP and not deal with the hassle of walking into the ancient city office where they all think they are John Wick hah.

Its only a few miles away, you don't need to be LEO, But I'm sure there is a wait list now. Due's are very reasonable! You can access all the information to become a member from the website.

I'm a local of St.Augustine.. We have a ton of great shooters here and a lot of match's in the area. The first week of the month is Steel challenge, the 2nd weekend has a match in Yule, 3rd week is Steel challenge or USPSA at SAPSA, and the fourth week is Ancient city USPSA match. So there are two ranges here, I would recommend trying to become a member of FOP113. Ancient city is really expensive and I don't care for it much but that's just my opinion on it. We have some great local gun smith's, and bullet manufactures that make some great ammo as well. Let me know if you need anything, we frequently go to the range and practice if you would like to check the place out before applying for membership.

JP barrels are hard on coated bullets, my loads from my JP rifle are considerably slower than many of my counterparts running a different barrel. For instance it takes me 4.0g of wsf @ 1.140 to make 137 PF using a 125g coated bullet. If I were to shoot a JHP it would be even more! I have no experience with E3, but Titegroup, wsf, wst, autocomp, hs6, n320 in any bullet weight have always been slower in my JP barrel YMMV.

I'm running 4.0g @ 1.140 and a 125 coated for a 137PF

My friend has the MBX and it is doing his gun no favors in terms of flatness, our guns are setup basically identical except I'm running a JP comp and he runs an MBX. I would say ours handle/felt recoil/muzzle rise and dot movement are SUPER close.

Yea that infinity ar9 price tag.... "runs away"

I can defiantly see the gas porting out of the top first! You shooting a hot load or what PF is that around @MemphisMechanic

I'm waiting on my lantac to arrive, debating opening up the holes as well. Could you keep me posted should you try to experiment?

I thought I had tried every combination in the world for my particular gun Stick haha.

Hmmph... Thanks for the input so far guys. I know the feeling of trying something one day and the next range session it feels... different.