zombywoof
-
Posts
852 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by zombywoof
-
-
Blazer with .040 TK and RS
-
.040" moons give me better ignition on my 929
-
A single stage press will make ammunition.
If you want to make ammo in quantity easier and faster, the cost goes up.
What is your time worth.
I went from a single stage to a Loadmaster to a 650.
The amount of ammo I started going through shooting USPSA I needed a 650.
-
-
My load for my M&P compact 125 gr coated bullet is 3.1 grains WST. Comes in at 108 PF. Super soft.
-
Sweet! Good luck
-
-
On 12/26/2023 at 11:05 AM, iukamedic said:
I don’t know much about these. I watched a couple of you tube videos on these a little while back. I handled on of those 226 x-fives in my local store and really liked the feel of it. Draw back is single action only and greater than 2000 for just the pistol. Is the stock 2 supported well?
The Stock 2 is supported extremely well. It's the best DA/SA gun out there
-
I would not rule out a Stock 2. Not as nose heavy as a Shadow2.
-
take the left side grip off and make sure the right side grip is sitting in the cavity correctly.
-
I put a dot on mine
-
Shot a match that had about a foot of rain before and during the first day. I bought a pair of soccer cleats they worked very well while others were slipping.
I haven't used them since. Trail running shoes have work well other than that day.
-
So is the hammer problem solved? Was the sear installed incorrectly?
Did you removed the firing pin and install it incorrectly?
-
I've seen many people go in and out of the sport.
I agree with stop dry firing and just go shoot.
The two hour drive sucks though.
-
9lb ISMI or EGW
-
-
If it's the .040" moonclips, I've been waiting since February.
I talked to George a few weeks ago. He said he is waiting for the material to be rolled to .040".
-
I have one in my small frame Tanfo and all my large frames.
I've never broken a TRS on the six Tanfos I've own. Although it seems a bad batch of TRS springs were made
-
I have the Patriot Defense brass aggressive palm swell. They are nice.
-
I also have several Tanfos. I bought an used Eric model open gun as a back up to my 2011. After while the 2011 was just a better gun.
-
-
What are the feed lip measurements?
-
I'm still using a Gen 1 Delta point on a dove tail plate.
-
14 hours ago, aalbert said:
Out of curiosity has anybody tried welding anti-splatter spray?
I'm testing out the welding spray now.
I shoot my cast, coated bullets through my open gun. The comp gets a coating of lead.
The spray has helped remove the lead much easier.
Gold Custom Eric 2007
in Tanfoglio (EAA / IFG)
Posted
That's a lot of holes to make major in 9mm.