Jump to content
Brian Enos's Forums... Maku mozo!

gregshin

Classified
  • Posts

    115
  • Joined

  • Last visited

Everything posted by gregshin

  1. Been thinking about building a pcc...what spring and buffer weights do you guys prefer?
  2. is there a weight limit in limited class?
  3. Is it better to just buy a complete MBX magazine? Or Buy MBX tube use different internals? and tune it? Or buy STI tubes use different internals and tune it? I don't mind buying dawson's tuning kit i just want to make the right purchase the first time .
  4. Slug your barrel and see what inside diameter of your barrel is. I had 9mm sti that couldn't group nicely...tried all kinds of loads and factory rounds. Took it to the Smith and he measured .357 so no wonder my groups were never good.
  5. 1.3 OAL? 1.13 maybe? Sorry it's 1.130 oal
  6. Funny how those were 2 exact powders i settled on using 147gr PLATED. My buddy introduced me to Clays and i forgot his chrono results but i was using 3gr at 1.30 OAL and it was stupid fast and accurate enough for steel matches. After clays dried up i went Ramshot Competition and settled with 3.6gr at 1.30 OAL as well. My 10 shot string with mixed brass is below with a 5inch 2011 gun. 136 power factor 928 FPS average
  7. I'm looking to just load one powder for my 55gr blasting ammo and 77gr ammo. Anyone load just 1 powder for both weights and are happy with the results or do i have to get 2 different powders? My barrels will be 11.5, 14.5, and 18inches long if that makes a difference?
  8. 133pf and it shot great
  9. My buddy and I used 3gr for 147 plated.
  10. Heres mine with 147gr plated 3.6gr of rs comp at 1.130 oal. 10 shots got me about a pf of 136. 928 average with a SD of 21.4 Great accuracy from a 2011 5 inch barrel.
  11. I'm assuming that if I just use a seat and crimp die on my last station i can use the combo of the bullet feeder and power check die correct?
  12. I don't load 135gr...but the ramshot data said 3.0 grains is max for my 147 load. I had to go 3.6 grains for it to cycle and the primers still look great. i can probably go down to 3.4 or 3.5 and do 1.125 to make around 135PF. what is your COAL? and what is your barrel length?
  13. What's ur recoil weight? I went with 10 lbs and a 147gr with a fast powder.
  14. 147gr plated 3.6gr of rs comp at 1.130 gets me 136pf at an average of 928fps from my 5inch 2011 gun.
  15. 147gr plated with 3.6gr at 1.130 gets me 136pf. Primers look great with 2011 5inch barrel.
  16. Do i need a caliber specific firing stop made for 9mm? or can use a series 70 .45acp oversized stop? i'm using a STI slide and an EGW .068 firing pin with novak sight cuts if so...
  17. What tool do you guys use to know if you sights are dead even on the slide? i've always eye balled it...but i'm not a smith nor a tool person. there has to be something to measure each side of the sight to be dead even on the slide.
  18. I'd go with the trojan.the grip area is undercut and has checkering. That's already at least $250 of upgrades not including refining charge.
  19. I'm in the market for a new barrel. That being said i rarely take shots out to 50 yards...but if I have to and since i need a new barrel anyways why not ask the question before buying. I looking around for barrels and noticed that schuemann is pushing a 24 gain twist...has anyone user 147gr and 124gr bullets with this twist? I'm just better off with using a 16 gain twist since load mostly147gr bullets?
  20. I'm in the market for a new barrel. That being said i rarely take shots out to 50 yards...but if I have to and since i need a new barrel anyways why not ask the question before buying. I looking around for barrels and noticed that schuemann is pushing a 24 gain twist...has anyone user 147gr and 124gr bullets with this twist? I'm just better off with using a 16 gain twist since load mostly147gr bullets?
  21. I got a ck arms 2011 frame with clark para cut. Can I use my existing sti mags? I run them in my current sti that has a wilson nowlin cut frame.
  22. i have one and for bull barrels it's awesome. if you have bushing barrel then it's really not worth it.
  23. My goal is to make my gun shoot flat as possible. Currently i'm using a 9lb recoil spring on my 147gr loads. What main spring weight would you guys recommend? BTW I normally use CCI or winchester primers.
×
×
  • Create New...