XtReMe90
-
Posts
1 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by XtReMe90
-
-
Well broke my first swage rod while processing.223. I was leaning towards the Fast & Friendly Brass swage rod or the buying the Mark7 Swage Sense... what’s do you think my better option is? FYI I only load and process for small primers.
-
Mine gets delivered tomorrow
-
Monotubes don’t require a barrel clamp... barrel clamps are bad because every time you take the clamp off to clean the gun and then re install it the POI of your slugs will change. Monotubes are one monolithic tube unlike extensions that reduce the chance for the follower, spring or shell to get bound up on while shooting. Monotubes are less likely Fail when dumping your shotgun into a barrel. The weakest part of a shotgun tube extension in where you thread on the extension. If that breaks your match will be done unless if you carry’s spare and the tools to get the broken hreads out. Bottom line is a RCI Monotube is the way to go if you can afford it but don’t let the hold you back from getting in the game. Shoot what you have and can afford and build upon that.
-
How much clearance is needed between the top of the gasblock and the sides of the gas tube channel of the handguard? I installed a SLR sentry 7 set screw version on a SLR 16.5" solo lite and I maybe have a 1/32 clearance before it would hit the sides of the gas tube channel on the handguard. I know that using a comp most of the force will be pushing the barrel down so I'm assuming I will be ok.... what's everyone's thoughts?
-
Does anyone have any load data for some 55gr SP with Winchester 748? Only thing I can find is max load of 26gr.
-
I currently use Cudalube and it seems to get pretty thick and slow my slide down when it's below 40 degrees out. What lube does everyone use for cold weather shooting?
-
JP-GMR 13 with ADM 15" handguard
-
I'm running a 18" Rifle length gas Proof barrel with a JP low mass BCG.
I was leaning towards H355 for my 55gr and IMR 8208 XBR for my 77gr. One of our local club matches has targets out to 600 yards consistently so I would like to work up a load for longer distances.
-
Just cutting my teeth in the rifle reloading game.. I'm looking to load some 55gr bullets for mainly punching paper at 3-Gun competitions but would also like to use them out to 200yrds on plates if needed. What's everyone's go to powder for loading short range rifle rounds? I am also looking to load up some 77gr for 2-600yd range... do you use the same powder as you 55gr loads or do you use something different for more precision shooting? I should also add that I will be loading on a Dillon 650 and I have read that some powders do meter well due to their shape.
Thank you for your help!
-
Shot some 147s with titegroup through my chrono last weekend with my 5" 2011.
3.0 Grains Avg 848
3.2 Grains Avg 871
-
I loaded up 5.1 Grains of Longshot under some 115gr Montana golds at 1.135 OAL and it's noticeably softer shooting then any factory 115, 124 and 147s I have shot. It averaged 1154 fps out of My 16" JP GMR-13
-
I tried these 2 loads out Saturday using 124gr Delta Precisions out of a 5" 2011
124gr
3.8 Grains of Titegroup 1.15 OAL 1045
3.6 Grains of Titegroup 1.15 OAL 999 -
Looking to purchase a Mr Bulletfeeder for my 650... if anyone knows who has the best price online for one please let me know.
-
I took mine off with a Alan wrench and 2 hands... no need for anything special.
If you look in the handguard at the barrel but there is several different Allen screws. Lossen those and then unscrew the handguard.
-
Anyone running coated bullets with titegroup?
-
Who else other then Extreme makes a 135gr plated or jacketed bullet?
-
I'm looking to work up a load with some 115gr Montana Golds and Titegroup... Anybody else using 115gr and titegroup? If not what's your PCC like to eat?
-
Just starting to reload and I'm trying to work up a load with Berrys 147gr RN and Tightgroup for my 2011. Just curious if 2011 shooters are finding better accuracy with longer OAL and if so how long are you loading your 147gr RN?
-
-
Does anyone have any idea what would make a M2 double fire? I haven't replaced any factory springs in the fire trigger and was wondering if it may be time to replace them...
-
What's optics are people running on their PCC? I'm leaning toward a Trijicon MRO or TA44 but looking for some other good options.
-
Wondering what's my best sling option for my shotgun. Is the proctor sling a good option or should I put a Noveske QD stud into the stock but what would my option be for the forend? I run a RCI monotube so I don't have or want to run a barrel clamp.
-
Wondering what bullet weight and shape people have found are the most accurate. I have been shooting the remainder of my Freedom NEW 147 RN that I was shooting in my G34 and in my 2011 it's produceing a 3" group at 25 yards. I'm thinking that I should be able to get better groups then 3". Please let me know if you have found a different weight or shaped bullet is more accurate.
-
What's the real difference between carbon steel vs stainless CK textured Grips? I want to leave them unfinished so what would be my best option?
Any shoot Nitro 100 with 165gr?
in 10mm/40 Caliber
Posted · Edited by XtReMe90
Getting to the end of my supply of N320 and looking to try a different powder. Has anyone tried Nitro 100 with 165Gr coated?