Open1215

Clay dot and a 147 for me. TG works. 3n38 for maj Sent from my SM-J700T1 using Tapatalk

I've loaded 105 for 9 major in a 2011 to see if I could. I believe I got major I can't recall load or PF. I will say if your not planning on competing with it but want gas for the comp load a light bullet and slow powder. I know someone here was using lilgun under a 90g for steel. Said it was like a cap gun going off but worked the comp. I don't know if it cycled the slide. If it's a toy drop in an 8lb spring and get some slow powder aa9 n105 or even lilgun n light bullets. Enjoy it. See what works well in the gun. If you decide to try open major there is a lot of Glock recipes that work well. Hs- 6 and a 115 is awelcome out of a g17 with a carver comp. So is 800x it's just a PITA to load... (LG flake) Sent from my SM-J700T1 using Tapatalk

Depending on the barrel it may be ok. If your not planning on making major and just shooting for fun load up some N105 and a 115. That should give you plenty of gas to work in the comp Sent from my SM-J700T1 using Tapatalk

Ive used AA 7 in 9 maj as well as 38 supercomp. I was always told AA #9 was too slow for supercomp and a light bullet. Now that it's available I may try it but I don't think it would work for 9mm Sent from my SM-J700T1 using Tapatalk

Yes. He had 2 and they sold already. Sent from my SM-J700T1 using Tapatalk

Pm sent. Sent from my LGLS991 using Tapatalk

What are you looking to have done? Pm me if u like. Sent from my LGLS991 using Tapatalk

Wow! That's a nice set! Sent from my LGLS991 using Tapatalk

Looks pretty sweet! I really like the TIN coated pieces too. I really like it! Sent from my LGLS991 using Tapatalk

Can we get a pic of the cuts from the top? Looks great btw! Sent from my LGLS991 using Tapatalk

Android here. I can't see them on tap talk or my email. Sent from my LGLS991 using Tapatalk

I love that's CZ! Sent from my LGLS991 using Tapatalk

Love the quote! Sent from my LGLS991 using Tapatalk

Hs-6 and WAC are great I love hs-6. Depending on ur gun you may be over 8g. Start at book data and do a load latter work up to what makes pf in your gun. Titegroup is great for minor ONLY!Sent from my LGLS991 using Tapatalk

If you are planning on shooting Limited I would buy a tanfoglio limited gun. Either the limited or the extreme Limited would both be wonderful choices. If you're not planning on competing in open buy a gold team wouldn't be very prudent. If you are looking for out of the box and ready to rock get the extreme Limited. If you are looking for a 6 inch gun a hunter would make a wonderful choice once rebarreled in 40 Smith & Wesson. It would need a bit of other work as well. Just my two cents. Sent from my LGLS991 using Tapatalk

I really like 3n38 and n105. Both work great. I also like AA-7 but it's not as clean.

Thanks for the update. I still haven't heard back from them on a blueprint. Sent from my LGLS991 using Tapatalk

Hello all. I am milling a Glock for a dr red dot. I have read the hole pattern is the same for a ff3. I have the CAD for a ff3 already does anyone know if the footprint is the same as well? Thanks! Sent from my LGLS991 using Tapatalk

Looks great! Sent from my LGLS991 using Tapatalk

Use a bit of one shot. I had the exact same issue u mention. Ram sticking on the down stroke after stainless tumbleing. I got some spray lube and it fixed the issue 100%e Sent from my LGLS991 using Tapatalk

My latest collaboration. What do u think? Sent from my LGLS991 using Tapatalk

Really pleased how this turned out. The Cherokee guy knocked it out the park too! Sent from my LGLS991 using Tapatalk

I really like what you did on that slide! I am planning to have some similar cuts done on my Apeiro slide to act as front cocking serrations and to remove a little weight. How did you determine how low you could go on the slide for the thru cuts? Is that where the slide rails start, or some safety set back from the rails?Setback from the rails for safty. I try to stay at least .1 from rails and locking lugs. Just for my comfort.Glad u like the look. The serrations are 75 or 77° if I remember correctly. Sent from my LGLS991 using Tapatalk

Now paging DR Atlas. DR Atlas your expertise is requested. I'm sure he'll be along shortly, he will have the answers Sent from my LGLS991 using Tapatalk

Mine came with pathpilot controls. It's what I've learned on so I don't have any complaints. I have more issues with f360 crashing.Side note. Anyone else having f360 crash on them frequently? It crashes on my almost once a day. I'm using a Dell with a I3 prosesser. Sent from my LGLS991 using Tapatalk