encoreman

Thanks Steve RA

Thanks Sarge, but I googled first. I will have to track down one of my old shooting buddies and see if they have it in their memory bank.

Hi guys several years ago a few friends came up with a mix of auto trans fluid and Dyna lube. Anyone have an idea for ratio? Thanks Mac

Hi guys, I am looking for a firing pin stop for my P16-40 limited SS. I have purchased from Brownell's, but that part is discontinued. Anyone know where to find one and if you have a part number that would be great. This is the 2nd stop that has had a crack, just afraid it may break at a bad time during a match or whatever. Thanks for any input. Mac

Hi guys, was looking for sight part for my 16-40 limited and stumbled on Para hi-cap mags for $27.95 at Sarco. I am just passing this info along for those that may be in need of hi caps. The website didn't have a pic, you can call them. Moderators I am not trying to sell anything or give a plug to a business, just passing along for those that may be hunting these. Thanks Mac

Hi guys I have shot this Para 10-15K and have done nothing but change out 2 firing pins stops that were cracked. It has always ran smooth. Last match I thought it was my cast lead reloads on 2 stages the slide wouldn't go completely into battery and I had to hold slide with left hand and hit back of grip hard with the right hand to get it to slide and eject round. Well today I was cleaning a couple of pistols and when I went to put this Para back together I had the same problem, I was putting in the slide stop pin and the slide would be smooth as glass and then it wouldn't budge, I messed with it some couldn't find anything that seemed out of place. I always run this gun wet and there was plenty of lube, after I put it back together it seemed fine, but I think now it wasn't the ammo. Any ideas before the gunsmith gets to earn his keep? Thanks Mac

First of all Grumpy wins!! I will tell on my wife she doesn't get on here. Several years back we are on vacation and I pretty well knew the route I wanted to take, but to be sure I didn't make a wrong turn I asked my wife to look at the map that was already turned to the correct page, well she studies if for waaaay too long and I say hurry up I am getting close to the intersection, she say highway 6. I say what? I snatch the map and while driving look at it and the highway 6 was the really small numbers that designate the mileage between 2 points. Kinda like a monkey doing math problems!!

A few years back my oldest grandson who was about 2 was strapped into his car seat and me and him were on our way to the deer camp to ride on my Kawasaki Mule. Well I am hard of hearing and he was not talking real well and he was trying real hard to get me to understand what he was saying and he got frustrated and decided it best to SPELL it out for gramps. Like rlzpd. I almost wrecked the truck I was laughing so hard. I sure wish I had it recorded. Kids will say the darndest things.

Let me chime in about Dillon's no BS warranty. About 15 years ago I bought a used square deal off E-bay and it had a broken primer drop tube. I called Dillon and told what part I needed and he got my mailing address and was about to hang up and I said I hadn't given him my cc info and he said it's blue isn't it? I said I had bought it off E-bay and he said I don't care if you found it in a ditch, if it is blue it is under a lifetime warranty. The guy I bought it off of said it had been his uncle's who was also a shooter. I can't tell you how many thousands of rounds that machine has produced and it still runs like a clock. Last week I was running a batch of .40's and in 1 hour I produced 345 rounds and the primer tip had to be replaced which took 5 minutes or more. When this panic buying subsides I will be buying another blue press! Thanks Dillon may your company be blessed with many more years of increased revenues!!

Hi guys, I am running stock 16 round Para mags with Dawson Ice magwell, Dawson extended mag bottoms, and I think Arrendondo extended spring. Dawson no longer carries the Para follower. What other follower can I use as the stock follower and the STI follower they sent won't work. The old part number is 544-0030. If someone has one or knows where to get 1 or more, please let me know. I have a non functioning hi-cap mag. Thanks Mac

That sounds about as clear as muddy water!! But I understand that!! Thanks Mac I just thought it would be kinda crazy to have spare parts and not have a clue where to put them.

Hi Guys, I was looking on Dawson Precision site and saw a DP basepad service kit that contained springs and detents. I don't guess I know where these are in the mag bases and how to replace them. Never had any problems, but it never hurts to have spare parts, of course it would be nice to know how to install them. All comments welcome, even the ones calling me stupid!! Thanks Mac

Hope everyone has a safe trip and match. I R.O.ed Area 4 in 2005 & 2007 and enjoyed the good shooters. Kudo's to the San Angelo crew!!

Thanks Tom, At least it's a step in the right direction. I thought I would ask before trying some. Thanks Mac

Hi, Has anyone loaded and used the Berry 30-30 plated bullets? I found some fairly cheap and wondered how they work, also could use them in my .308 Encore pistol. Thinking aloud. Any and all help welcomed. Happy New Year to you all. Mac