Jump to content
Brian Enos's Forums... Maku mozo!

freedoms

Classified
  • Posts

    69
  • Joined

  • Last visited

Everything posted by freedoms

  1. Anyone have the part number's to order Dies Set & Casefeed Plate for 650XL 6.5 Creedmoor. Thanks
  2. Anyone have the part number's to order Dies Set & Casefeed Plate for 650XL 6.5 Creedmoor. Thanks
  3. How much do you use that works the best and what OAL would you set them at with WW231 / HP38 ?
  4. What OAL would set them at with Sport pistol.
  5. Looking for any Load Data to start with and best powder for Acme HI TEK Coated 9mm 147 Gr. FP-NLG just shooting paper. Thanks
  6. This is the first time I’ve try to load 9mm. I’m using PMC cartridge with Acme HI TEK Coated 9mm 147 Gr. FP-NLG. I’m thinking of starting out with 4.5 Alliant Power Pistol OAL 1.13. I need recheck this also any input on this would be great. I’m setting up the dies and I did the plunk test with a Dillon 9mm pistol gage, then tested in the barrel of Sig P320 all fitted great. I crimp the cartridge till it passed the plunk test the crimp diameters of ~.379". When I look at the cartridge I can see the bullet bulge out from the Cast. Is this right you may be able to see it in the picture I've attached. Thank for any help with this.
  7. Can you list the part number Blue Locator Tab #13569 $1.60ea Blue Short Locator Tab # 17384 $1.60 ea The short tabs are for the handle side of the S1050 Thanks
  8. If it's the EZ handle I used a 3 foot pipe over the handle and then tighten the nut.
  9. What bullets 45 acp 230gr.coated ? Apologies but this is with 180gr 40cal. Thanks 4.6grains didn't look right for 45
  10. I Install it on three of my stock powder slides works perfectly Thanks. I ordered one from UniqueTek along with the powder baffle. Really want to make it easier to adjust for different loads, but have you guys seen reductions in extreme spreads and standard deviations during chrono testing? I also Installed this powder baffle it is better then the one UniqueTek sells Prairie Dog 6-101 Perfect Powder Baffle for Dillon Powder Reservoir Tubes you can find it on Ebay
  11. I Install it on three of my stock powder slides works perfectly
  12. What are you using for primers and powder and brass and where did you find the load data on the 45 acp coated I can't find any load data on the coated 45 or 9 There is tons of loading data on this site for coated lead bullets. You can use the loading data for any lead bullet of the same weight and style for these bullets. Use the search function in the caliber you want and there are literally days of reading about loading coated lead bullets. Thanks
  13. What are you using for primers and powder and brass and where did you find the load data on the 45 acp coated I can't find any load data on the coated 45 or 9
×
×
  • Create New...