RWatts

Been trying for days. Is that just a simple on/off switch?

Did the bolt that was giving you issues get tested in the lowers? When I switched bolts (from Lantac to JP) my issue totally disappeared.

I did have both of those issues. I was running a Lantac bolt but switched it out to the JP and all issues went away...

I just purchased a used MA Systems case feeder.(older yellow one) The person I purchased did not have anything but the unit itself. The case feeder has a strange extension cord attached and my best guess is there was some kind of switch that caused the unit to run. when I plug the case feeder to juice, nothing happens. Can anyone share photos or a description for the parts missing.

Im not sure, I will check.

the rifle picks up the next round fine an locks back on an empty mag.

I have a TriggerTech Diamond and although it will go gown to 1 lb I have it set at about 2.5. I have several times (live fire only) had the hammer follow the bolt home and when the trigger is pressed its dead. Will not fire. I can manually work the charging handle and the rifle with fire. I have tried to reproduce the problem manually working the bolt and it only seems to do it during live fire. Also important, I thought i hada faulty trigger so I swapped it out with a second trigger (same make model). Problem persists. Any ideas? Lantac upper/lower lantac buffer/spring triggertech safety thanks!

Was afraid of that...thanks for the info.

We have a couple of revolvers in the store that have cracked frames. Is there any saving these or are they parts now...? Thanks

got the redding die...will see if it fixes the problem.

I check he seating stem and I am already using the pointed end. I did notice there is quite a bit of access room. I also tried Dillion's suggestions of allowing the cases to center the dies. I will load some over the weekend and report back. if it doesn't fix it, I'll order the Redding die.

Thanks for the suggestions and ideas...I will try them all.

Yeah I have shot a ton of them...

The reloads worked fine with this powder funnel. If something has changed I'm not sure what it is. the bullets measure .358 the cases range from .740 to .746 the bell is set for the shorter cases, so the longer ones are probably getting hit pretty hard, but seem to get pressed into shape at the crimp stage. you can see the bulge better in this pic. It's only on one side, almost like the bullet is cockeyed.....

I'm hoping you guys will have seen this before and be able to help me out. im reloading on a Dillon 650 with Dillon dies. The only thing I changed was the powder funnel to the one provided with the mr bullet feeder. you can see where the base of the bullet is making a visible line on the outside of the brass. These rounds will not chamber. Range Brass various head stamps buyou 135 bullets

I think that you will find that Rolex John is more like Timex John

The base model M2 is 1299.00 the race package from Accurate Iron is 950.00, So that 2249 before taxes or shipping then Alpine has to make a little something....Buy once cry once if you want the best...If a person cant swing it there are always Mossbergs and Stoegers....ofcoarse then they would need to change the screen name to TimexJohn...lmao

Alpine Shooting Range in Fort Worth has Accurate Iron full race package M2's in stock and ready to ship...no waiting. I believe they stock 21's, 24's and 26 inch barrel guns. You can PM me for Details.

To be honest I have only shot steel at 600, I have never shot a "group". I have just never had low Ed and Sd and a large group..but hey, I don't mind a trip to the range...

I used to shoot precision rifle and when working up loads would chase ES in the low teens and SD in the single digits. What have you guys found to be reasonable spreads with a gas gun. I'm getting ES in the 33-35 range and SD in the 13-15 range. Usually this would be plenty good for anything 3-gun but around here we are getting 500-600 yard targets every month...I just figured if I put some serious prep in my long range loads, it would increase my margin for error.thanks in advance for your replys. Ryan

Hey Guys, Just wanted to let you know that we have a 9mm DVC open and a 40 DVC Limited in stock. MAP price on both. 3299 and 2799. PM if interested. Ryan

Alpine still has the 9mm open in stock. 817-478-6613

We also have a DVC Limited in 40. 2499.00 Free Shipping. I don't think some people ^^^ read all the posts...lol 817-478-6613

Alpine Shooting Range in Fort Worth Texas has a DVC open in 9mm that is available. 817-478-6613. Ask for Ryan 3399.00

http://www.brianenos.com/forums/index.php?showtopic=221798