igofast85
-
Posts
61 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by igofast85
-
-
It depends how often you are swapping. Life will be easier with one powder dropper per caliber. If you want to save a dollar you could do one for 9mm and one for rifle. I'm assuming you shoot higher volumes of 9mm and both rifle charges will use the large charge bar.
Sent from my SM-G920V using Tapatalk -
Metal baseball cleats may work.
Sent from my SM-G920V using Tapatalk -
You could call and ask Dillon, they are generally pretty friendly.
Sent from my SM-G920V using Tapatalk -
I'll echo having a 550 and 1100 long term. The 550 is much handier for smaller runs and cheaper to outfit for new calibers. Most people are only shooting one or two calibers in 1100/1050 volumes.
Sent from my SM-G920V using Tapatalk -
I think a Monday gun is one that was made on a Monday (or Friday afternoon); implying that the workers were not paying as much attention as normal, possibly lower QC.
Sent from my SM-G920V using Tapatalk -
Water on the bays and good ROs. Everything else is gravy.
I do like it when the prize table (cash or stuff) is merit based with a few high value random draws.
Sent from my SM-G920V using Tapatalk -
Would they then use PCC start positions?
Sent from my SM-G920V using Tapatalk -
Craziness
Sent from my SM-G920V using Tapatalk -
Have you consulted SV? They may have had a bad batch of heat treat or something. They may replace it.
Sent from my SM-G920V using Tapatalk -
Where are you seeing it?
Sent from my SM-G920V using Tapatalk -
I like mine fairly loose; just tight enough to not fall out if I jump up and down or bend over.
Sent from my SM-G920V using Tapatalk -
That vest is ment for shotgun sports (skeet, trap, sporting clays, etc). I suppose you could use it for IDPA (assuming the gun doesn't show through the mesh), not sure why you would though.
Sent from my SM-G920V using Tapatalk -
I used to grab the last round as I racked it out, but then I saw the results of a guy who had a round detonate out of battery when the ejector hit the primer while he was racking out a malfunction with his hand over the ejection port. Very unlikely situation, but a couple of rounds isn't worth the time lost from shredding you hand.
Sent from my SM-G920V using Tapatalk -
You may find that the MRDs with less aggressive shielding get a lot more soot on the lense.
Sent from my SM-G920V using Tapatalk -
Very interesting. Thank you for taking the time.
Sent from my SM-G920V using Tapatalk -
Assuming you want a gun for open, steel would be the most common option. This is mostly due to the increased weight.
Sent from my SM-G920V using Tapatalk -
For sure the uspsa population as a whole is getting better/faster. For a more exaggerated example check out the top guys shooting el prez back in the 70/80s.
Sent from my SM-G920V using Tapatalk -
Cameo near Grand Junction CO is new and very nice.
-
If You really want to use the same load for both, then you will need to set up for uspsa major.
Sent from my SM-G920V using Tapatalk -
My double alpha binds, I've heard good things about the everglades.
Sent from my SM-G920V using Tapatalk -
I think 2011s and 1911s use the same slide. So there are lots of vendors out there (such as Caspian).
-
Single side mount Cmore was the standard for a long time. It will work fine.
-
Hopefully posted here soon.
https://uspsa.org/matches/major
Sent from my SM-G920V using Tapatalk -
I have a couple of gen 1 sti tubes with +1 bases and grams followers. All hold 20, most I down load for reloads.
Sent from my SM-G920V using Tapatalk
40 SW load data
in 10mm/40 Caliber
Posted
That's a great place to start. You might need a .1 more depending on your barrel. I've never melted a fiber, but I do have to take breaks in my training sessions as the gun gets too hot to hold comfortably.
Sent from my SM-G920V using Tapatalk