dcalvert

Thanks just what I am looking for. Dcalvert

Does anyone make and adapter for this gun to the Cmore RTS2? What are the advantages or disadvantages to this set up? dcalvert

Thank you guys! Dcalvert

Will a shadow 2 slide fit on my SP-O1 Shadow? DCV, dcalvert

I have had good luck with Blue Bullet 125gr RN and WST. dcalvert

Got is out to the range finally. Shot another 200 rounds, I have 2 failures to reset this time. I feel that it is about time to give up on the Elftman AR9 trigger as it is just too finicky and even if I get it working I wonder for how long. Thinking I will try the JP original as I am out of solutions for this one. Thanks to all that replied! dcalvert

No SS wave washers as it is not short stroked.

Did this at 6:00am this morning. Just got back from the range. 200 hundred rounds of perfection! I need to push another 800 before I will trust this tigger, but it has never been able to run more than 50 with out resting problems. Do you think that a small difference in the screw length binds the housing that holds the triggerGroup? Time will tell. Dcalvert

Prefect, I will try this as I am out of ideas on this one. Thank yououter limits!

Thank you10cup. I have searched this and have seen your post. Just hope that someone here can can explain why or if it is there is a tune to fix. Pretty price trigger to not be 100% reliable. Would not want to sell it with my name on it. dcalvert

I have the Elftman AR9 tigger installed in QC10 glock lower using a Taccom bolt and there 3 stage recoil system. Having having problems with the trigger resetting. Contacted Elftmann and reinstalled the trigger per their recommendation. Was still having reset issues so, off to Elftmann which they were happy to repair it and quickly sent it back to me. Back to the range and it is better but still having reset issues. Not sure where to go from here, but this is keeping me from shooting any matches with my PCC. Does anyone have this set up like this that is working? What can I do to troubleshoot or am I going to have to replace this? dcalvert

As a long time limited shooter I have had years of use with STI old style mags, fit with Grams springs and followers and base pads. Cant tell you how many time they have been dropped, and stepped on. This will give you 20 round mags that are dog tuff. I have never had one fail after years and years of shooting at Rio. dcalvert

Update 3.3 gr WST 1.120 oal 125 gr Blue Bullet= 138PF

3.8 grains WST with 125 gr Blue Bullet @ 1.120 is my Load for 5" steel gun shoot 125 PF. In he PCC with KAW 16" it is 175 PF. I am going to load it down to 3.3 gr. And chrono again dcalvert

Good point L9X25, my 5" STI with SVI barrel is 1001 FPS with 3.8gr WST 125 Blue B. 125 PF. Primers are a litte flat. Maybe all just chronometer few of these to get a baseline. Thinking primers mar get flatter. Definitely don't want one in the barrel ! dcalvert .

Just finished up my 1st PCC build with 9mm KAW valley 16" barrel, I have a 8lb jug of WST and a bunch of 125 grain Blue Bullets.Does anyone have experience with this combination? I have 9mm load with WST (minor) that I have used that is good in my STI 5", thinking about down loading it and starting at 3.3gr @ 1.120. Also have N320, CFE pistol & AutoComp. dcalvert Dcalvert

17 lb main spring and 14 lb recoil for my 200gr SWC shooting Major. I like ISMI chrome silicon. Dcalvert

At one time I had 2 650's on my bench. I added a 1050, now I have 3 1050's. One has a Ponsess Warren drive, you may find that you don't need the auto drive.They are outstanding machines that you could never wear out. I would buy the 1050 and consider if you really need the drive. dcalvert

Green 620 on my shorty's that are quite violent seems to work the best. You will need some heat to remove them. dcalvert

Grams are the gold standard, use them and you can eliminate the spring as the potential problem. dcalvert

Shoot as fast as you can see the shot. Do everything else fast. Practice until it becomes smooth and fast."Speed is the economy of Motion" dcalvert

The punishment of a slide ride on a major PF open gun will decrease reliability of the sight. As an died in the wool limited guy I find the RTS2 on the Cheely Frame mount a very easy transition. Atlanta Arms sells Major PF 38 Super/Supercomp and 9mm major that is excellent but not as good as rolling your own. Open is expensive and Fun too shoot. dcalvert

1 @ 170 and 2 @ 140's minimum the 3rd 140 is nice for classifiers that have you dropping mags after shooting 6 rounds or so with multiple strings. dcalvert

Blue Bullets for Limited and Montana Gold for open can't go wrong! calvert

Hard Chrome is my favorite by far. Looks and durability. I have at least 10 hard chromed pistols that see lots of matches and have never seen one with a speck of rust. dcalvert