SISIG

Steve, you think this piece is a worthwhile upgrade?

Build4u:Here's a crappy phone pic that I hope will help show the difference in the Dillon funnel (on left) and the DAA funnel (on right): As you can see, the Dillon unit simply "bells" the mouth of the case to whatever width desired. Works fine for FMJ/JHP bullets! But with normally oversized lead/coated bullets, the DAA funnel that "expands" the case with little to no "bell" simply prepares the case for a easy, straight in insertion of the bullet. IMO, it makes for a very stable round prior to raising the case/platform into the seating die. Less expansion of the case mouth while virtually eliminating any scraping/damage to the bullet and/or coating. Again, as depicted in the pics above, this combination speeds up the process for me! As always, YMMV..... Will this work with Dillon Square deal? I have the same issue with shaving.

124gr PD JHP 4.1 gr N320 @ 1.098 off CZ/ tangfoglio

Same here, trim the disconnect or to short.

Yep, backyard gunsmithing is not for the faint of heart. Fix the issue:) she is running fine now, live tested her yesterday.

I have a one piece sear and xtreme hammer with reduced power sear sear spring. My sear is not clearing the hammer hook in first shoot DA. Any thoughts? My other gun with same set up is just fine. I can see there is not enough clearance to release the hammer.

My CZ does not like Bear Creek 125gr due to its profile you will have to load short anyway. I have shot thousand if BC 135gr, CZ likes it feeds better. Only way to find out is to try them with your gun and decide what works.

Have you guy loaded 147gr Jhp with N320. Xtreme has some HP, any load, accurate?

Has anybody played with 147gr HP/JHP for action pistol are they worth to try. I read somewhere that 147gr Zero JHP is the way to go. Will you notice any accuracy improvement?

When is the next restock for case Gage's

Thanks guys, I end up smoothing the end of the screw with sandpaper because it's catching the hole in the side if the magazine, otherwise with just a few dry fire I'm liking it. It just so natural.

Is that with the ridge?

Can you guys post a Pic of your bullet nose out set up. What combo of screw and clip did you use.

Can you guys post a PIC of your Ghost 360 Bullets Out set up. What combination of retainer did you use.

My CZ's run on Mobil1, any mechanical parts will wear out, shoot and have fun, they like it wet.

Thank you!

How many kinds of interruptor is there for S2? Is it different for 2 piece sear and one piece one? I removed the one that came with my stock 2 piece sear with uneven wing. I bought a new one to go with my extreme hammer and it has an even wing. Anybody noticed this, will this be interchangeable?

135gr 4.0 N340 @1.2

Good to know Mr. Gump.

Got it Jed, just want to know others experience, that why their Unicorns hopefully they will come out of the shadow:)

124jhp with 4.8 n340 1.098

So with the one piece sear all of the issue was eliminated?

Anybody else want to share their input.

Jed, so you have the extreme hammer with one piece sear?

Has anybody use the two piece sear with the extreme hammer? Do you really need to get a one piece sear with it?