cvincent

I shoot limited. I would rather not take it out. We'll get it squared away. Sent from my iPhone using Tapatalk

Hi Gump, the primer strikes on the spent brass are nice and strong, and with the light strike being barely dimpled, I immediately questioned the FPB as a cause. Ill give it some rounds down range. Before worrying too much about it. Sent from my iPhone using Tapatalk

In one of hennings videos, he states he takes off 1 coil. FWIW. Sent from my iPhone using Tapatalk

I haven't had to bend my springs to work. Sent from my iPhone using Tapatalk

Lol, I'm sure his wife was pleased with that. Thanks I'll take a look at mine. My light strike was the same way, barely any mark at all on the primer. Since I've only got a little over 100 rounds through the gun since new, maybe i shouldn't worry about it too much quite yet.. Sent from my iPhone using Tapatalk

Ok, i had a light strike in the first 100 rounds of adding the EG light FP, and hammer springs, henning FP. Just curious as to what you did, I probably have already taken of .002" by polishing the PFB

How did you figure it out, and how did you fix it?

Only thing with the CR speeds is you have to stick a washer or similar as a spacer with the STI insert to fit tanfo mags. Not a real big issue though Sent from my iPhone using Tapatalk

Cool, I'll have to try it, looks very rigid Sent from my iPhone using Tapatalk

Anyone use one for 3 gun? Wondering if it flops around while gun is holstered running around, like the plastic hanger DOHs do. Sent from my iPhone using Tapatalk

Ahh FPB lifter Sent from my iPhone using Tapatalk

What's the deal with the 2 piece sear? The second piece moves independently of the sear. It doesn't appear to interact with The interrupter. What does it do? Sent from my iPhone using Tapatalk

I would suggest a henning guiderod as a must have. About 5000 rounds through my limited, the frame started to wear and produce burrs where the guide rod contacts. Henning rod eliminates this. I Am using .40 major loads, so a 9mm may not show the wear as fast. Sent from my iPhone using Tapatalk

Aluminum grips that are stock wood grip size/width. Sent from my iPhone using Tapatalk

X2 on the new magnetic block, I also put the muzzle support on. Stripped the black finish off, cut to length, and did a slight brushed polish to match the silver of the holster. Complete awesomeness. Sent from my iPhone using Tapatalk

Just got mine. It has the same tabs protruding into the magwell. Mags will not go in. Henning did send me an email yesterday, Stating to call him as he shipped the wrong magwell. Called him up, said he had a brain fart and forgot to machine the nubs. Said to just send it back and he would get a new one out. Sent from my iPhone using Tapatalk

For the flashing, i would just hit it with some sandpaper then polish it out. As far as the little ears in the magwell, could it be for small frame gun? Mine will be here Saturday. Will check the fit on my Limited.

Large frame/custom size is what you want with an HC model with magwell.

the breakdown in the owners manual. https://www.eaacorp.com/Manuals/witness.pdf

I think I'll do that, just find a roll pin that drops in, snuggly. I think It's still odd that the parts breakdown doesn't list it. Thanks cats Sent from my iPhone using Tapatalk

Well that's partly good news. Would be worried if it was press fit and it fell out.

Anyone have the part number for the hammer pin pin? The parts Breakdown doesn't seem to list it, cant find it on eaa site. My pin is missing. Is it a press fit pin or does the sear assembly just hold it in?

The new Website, Henningshop.com is now allowing ordering of the large frame magwell. The old site still says they are out of stock. I was getting a conefit guide rod and noticed this. I ordered one up, we will see what happens.

Whats the difference in the small frame magwells? I've almost called J&L a couple times to get a small frame modified. hopefully wont have to now..

I hacked up a DAA adjustable, and love it. Sent from my iPhone using Tapatalk