mannparks

compac 9mm300-400rnds double click started Not acceptable Sig!

Yes but these need no lube.

These are my powder coated bullets 45 ACP 200 grain and 124 grain 9 mm .45s were shot from a G 41 ,9 mm shot from a G 17 in a G 19 Pro-Formance is very good ,zero leading.

Wow! I guess I'll have to get with the program. I'm one that feels less is better,but? Charles

I put in a new rocket connector in my G 41 the other day and it turned out wonderful shot about 250 rounds and noticed the trigger starting to stiffen and the more I shot the stuffer it became pulled the slide off could not see any problem so pulled the trigger Assembly up out of the frame still could see no problem put it back together rack the slide and bingo i'm back to a nice trigger again what in the world can be going on ? Charles

Power washer

OK what's an Egw?

Thanks

What is a good dovetail mount for a ff3 on a 17 ? Thanks Charles

Ghost Edge good or bad ?

I know this post is almost a year later than the original post but you may want to try coating your own .it's not difficult I'll post some photos and I'll put up a link on the cast bullet website there's a lot there that can be learned about coating your own bullets. http://castboolits.gunloads.com/forumdisplay.php?184-Coatings-and-Alternatives The photo is a shake and bake method,230 gr lee mold with HF powder. Smokes powder is much better though.

Thanks,The reason I'm asking as I'm trying to set up a GEN 4 G 41 and some people intimated that these have problem trigger bars that should be changed out.

Nobody ever used any Ghost inc trigger parts?

what are your pros and what are your cons about any of the ghost parts for your triggers?

Who did you buy them from and what was stated on the pkg? There is several trigger bars. And welcome. Charles

Hand loads , 17 Glock and a 41 glock both guns will give me 2 1/2 inches at 25 yards

Welcome to the flustration

Lee 200 gr fn with red dot 3.5 683 fps

Lee 200 gr fn with red dot 3.5 683 fps

Both are 3.7 red dot, I'm trying to find slowest velocity that will work action reliably .in g41

Here are some red dot / lee bullet loads that I use Lee 230 rn 3.7 689 fps Lee 211 fp 3.7 732 fps My chronograph

8 moa fastfire lll 65 yr old eyes,so far I like.

Well actually that is the line left by the sizing die when pushed on. The bullet is contacting the lands on the olgive of the bullet just be four the brass mouth about 1/8 inch. This same round will plunk on my 1911 barrel.

Plunk test? Ok red round nose.230 gr. Pass plunk test Flat nose cast 200 gr. No pass

Oal 1.155 Bullet mfg lee .452/200 fp/rn