SRT8

Thank you - I emailed the admins last night to inquire about a vendor page.

Hopefully this isn't frowned upon by the admins, if so I apologize. https://reloadinginnovations.com is my store. I started development of these lights in January and opened my store to the public late March. I back every product 100% - you don't like it, return it for a full refund. Any questions, just use the email link on the site or message on facebook or here.

I'm using 3N37 with a 115 and it seems to be inverse sensitive. About 1 PF for every 10 degrees based on a few chrono sessions in different temperatures. Wondering if anyone else has seen this, or maybe it's my chrono that's temp sensitive.

Give Rick a call - he's very helpful. Number is on his webpage - http://mrbulletfeeder.biz/

You should always get a confirmation email pretty quickly. Approval emails follow later. Though I have seen issue with people receiving emails from PS. Check your spam folder and make sure the practiscore.com domain is in your safe sender list.

$20 for 6 stages (LI, NY area), second gun same amount (our matches usually fill up).

Awesome, thanks SRT! Which is your favorite, just curious?Amat Victoria Curam I only posted data for the powders you said you could get and that I have chrono data for, but my favorite so far (still pretty new to open) is 8.2 3N37 MG 115 JHP 1.175" with an 8lb recoil and 18lb main spring. Personally I didn't really like Silhouette - felt a bit snappy, lot of dot movement. I also have chrono data for HS6, Autocomp, and 3N37 if that helps (I've done a lot of testing with the DVC). ETA - might as well just post the rest of my chrono data (all tested with the DVC)... might be helpful to others as well. 9mm Major.pdf

Some load testing from my DVC Open in 9mm major:

Also, some advice regarding the DVC - remove all the screws on the scope mount and blue loctite them before you zero the gun. I know 4 others that bought DVC opens and the screws all loosened up, including mine.

Personally I think HP38 is going to be way too fast for 9 major. I have the same gun and I'm running 8.2 gr 3N37 under a MG 115 JHP loaded to 1.175". PF is 169.

I just sent 12 9mm bodies back to STI. Not one would run without nose diving (Grams or STI guts). They seem to have a problem in the transition area from double to single where the rounds under the top round are straight, instead of angled up. I tried a new SV tube and after a bit of fitting, it ran flawless, so I picked up a full set of SV tubes. Every one of them runs perfect. Also tried a friends MBX mags and they ran good as well.

If you're near a PC during the day, leave gunbot.net open and set the alert tone. I just picked up a bunch of Winchester SP for $29.50/k from Powder Valley using gunbot.

+1 I just added the these to my mags and filled in the base with epoxy so they hold 10 rds with some extra room for easy seating when fully loaded. The epoxy is level to the mag base so the spring angle is unchanged.