blackiechan
-
Posts
33 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by blackiechan
-
-
Glock porn
in Glock
Black magic skateboard tape is way better then other colorful kinds I've tried. It's thinner and way stickier.
-
Idk what division u shoot at but the elite match can't be in production cus it's single action only. I have a 9mm match and I like it. So far I have a henning flat trigger kit, 13# hammer spring and henning firing pin, and those things made the trigger pull under 3lbs. I shot a little over 1000 rounds with this setup and so far no misfire. If you like cz but don't wanna pay as much you can look at some Tristar or canik. They are supposed to be a really good cz clone.
-
It's illegal in idpa, uspsa and ipsc? It's illegal for series 80 1911s to do it also? And what about the grip safety pinned down?
-
Like the series 80 1911s people just remove it and some even pin down the grip safety also so the gun will just have one safety left. So anyone remove their glock safety plunger stuff for their game guns?
-
Ok I just did one to 1.100 and it doesn't stick anymore, but is it safe to get it to that short?
4.3gr bullseye, winchester primer
-
Just ordered some bayou 135gr RN and when I drop a complete round in the barrel the round would stick to the chamber a little. I've shot about 1000 rounds of bayou 124gr RN and they feed and shot fine. Anybody else has this problem? Any solution? Both OAL are around 1.145
-
Anyone started shooting high with the sight block? I shot about 100 rounds today at 10 yards and the groups were at least 2 inches higher. I'm using TTI front and rear sight.
I don't have the gun with me right now, so does that mean the rear sight is taller than the front sight? and since the front sight moved further out so now I have to raise up the front more to get both sights aligned?
-
I guess WSM is the brand name. I bought it at a airsoft store when I was in Hong Kong. It looks very similar to those ipsc holstets u see on ebay.
Oh actually u do need to modify it, but not for the frame weight. the glock trigger guard is too wide for the holster so I just used a dremal on it to make it wider, it also comes with shims u can put on for different widths of the trigger guard.
-
I got this cr speed knock off for my airsoft a while back and it actually works really well with the real glock, u can only pull up to get the gun out so u dont have to worry about accidently bump it forward and the gun falls off, and also NO MOD NEEDED for the frame weight.
Question for the weight, does mine looks installed right? Cus the end towards the trigger is higher than the other end, I test fired it for around 100rds and it was fine.
-
The one on the right is my first bike that I got last year, a 03 R6. And then 3 months later I bought the one on the left, 98 yzf600, it's my drifting beater/fighter project. BIKES ARE SO MUCH FUN!
-
Here's mine. I emailed TF and asked him what does he recommend for a g35, and he told me he got a batch cut up for g35 with g35 threaded barrel, and at the time when I emailed him he hasn't done one with g24 threaded barrel with the sight block for a g35, but he said he could cut one up.
I ordered the barrel through LW. And told them I want the barrel to be reamed, they didn't charge me extra and sent me a barrel without the ugly wolf, which I'm happy about. I haven't live fire it yet but my hand loaded rounds feed fine and extract fine so far.
PS: the frame weight isn't totally installed, I just slid it on for the pics.
PPS: Anybody wanna check the rules if there's a barrel length rule in limited/limited 10 div?
-
Like a older limited pro? It doesn't have square trigger guard, no checkered front and back strap, the safety and the trigger look just like the match's ones.
-
Is this it? The Bomar sight is factory?I believe it is a match no rail from his previous posts. But He will have to confirm or deny that
You got it! I kind of made my own, but would still like that one!
http://www.gunbroker.com/Auction/ViewItem.aspx?Item=465263357
-
I also have a match and just ordered this one last week, it should just drop right in right? And is it the same as the gold custom left side safety?
-
Well they weight the gun with a empty mag. And according to the eaa site the gun weights 44oz, so that's probably with a empty mag. The cut off in esp is 43oz. I remember reading it on here people are thinking about grinding off the light rail and putting holes on the mag tubes.
-
If I remember correctly a stock match is already too heavy for idpa, like 1oz too heavy.
-
Well you can also just get a G35 threaded barrel and a TF sight block when you are going to limited
-
Magpul GL9
in Glock
Just saw this from facebook, from a company called elite tactical system. And they are gonna sell them for under $20
-
I have this one, draw and holster fine, but it slides out slowly when u tip it upside down.
I just took the gun with to a gun store and try on the holsters that they have. And I'm sure we have a couple topics about this also here.
-
Why did you request to cut down the shroud? Is there a rule that the barrel can't get passed 6in in limited? Btw your gun looks badass!I just finished adding the shroud to my G35 which I use in Limited/L10. TF cut-down the shroud prior to shipping it my way.
It is installed with a slight gap between it and the end of the slide. This position allowed for proper alignment of the shroud and slide.
The barrel is a LWD G35 threaded version. The barrel is set-back inside the shroud less than a 1/4 inch.
Initial impressions only having run it on the practice range twice for about 400 rounds ...
- A picture of the front sight is always available to me compared to a slide mounted sight that "briefly disappears and reappears" during the process of cycling the slide.
- The shroud has stayed firmly in place using blue loctite which I let set-up for 2-days before firing the Glock
I use a CR Speed holster so it was simple to adjust for the additional length the shroud added.
-
That's like the cheapest one out of all the race holster right? But it doesn't look like it can be modified for the sjc frame weight.....just saw this thread. i would just like to share another option. this is the speedsec 5.
-
So why did you decide to use that thumb rest and not the sjc one from the frame weight and thumb rest combo? Btw both 21 and 24 look badass!
-
Can I use it on a G35? Yes. If you need one for a G35, I'll cut one to fit.
Robin Taylor
www.taylorfreelance.com
Ok so one for g34 or 35 has to be custom made? And I assume I'll need a g24 or 17L barrel for it?
-
I opened up a thread about a month pretty much the same as this one, gen 4 35 also.
I tried bayou 180 and 200 with wsf powder. I loaded the 200s to 1.150 cus its longer than the 180s, and I tried around 30rds and they all shot fine.
I also have a couple questions
For the 200s I used .3 gr less than on the 180s, I didn't notice any difference shooting between the 2. Do u guys notice any difference? Which one u guys like more?
Sent from my Desire HD using Tapatalk 2
What tactical light for glock 35?
in Glock
Posted
I was at a Robert Vogel class and he got a light on his 34 and he seemed to use the light as a weak hand thumb rest, is the light legal to use in idpa or production?
Sent from my SAMSUNG-SGH-I337 using Tapatalk