Jump to content
Brian Enos's Forums... Maku mozo!

Longshot83

Classified
  • Content Count

    63
  • Joined

  • Last visited

About Longshot83

  • Rank
    Finally read the FAQs

Profile Information

  • Real Name
    Daniel

Recent Profile Visitors

352 profile views
  1. I have read numerous post about gas tube alignment with the BCG and its affect in accuracy. Also in regards to the tube touching the barrel nut. So I installed the gas block making sure it's perfectly aligned with the gas port in the barrel. When I do this the gas tube is pressed against the side of the opening in the reciever until the BCG is installed. I adjust the gas tube so it doesn't drag or hang as the BCG is closed. However when the BCG is out or cycled to the rear the gas tube is still touching the side of the reciever. If I bent the tube so it doesn't touch the reciever the BCG will bind on it. Should I be concerned with the tube touching the receiver? I have had this issue with three separate recovers and all seem to shoot 1/2 MOA at 100.
  2. Thanks, that pretty much answers my question.
  3. Thank you for the replies. I read the rule and "factory configuration" is very unclear and open to interpretation. Guess I'll play it safe and stick will a plain barrel.
  4. I have been trying to find out if a match grade drop in barrel for a Glock is IDPA legal if it is dimpled or fluted and TIN coated? One like the ZEV barrel, Black List Industries, Agency Arms, or S3F solutions? I know a drop in KKM is legal, just wonder if the fluting or dimpling is a no no. Thank you.
  5. I've been shooting 3 gun for 3-4 years now. Started with an MTAC scope then upgraded to the Burris XTR II 1-5. I have since added a second 3 gun rifle to my collection and need a scope for my 18" gun. I am torn between the XTR 1-8 and the razor 1-6. Cost is relatively close and weight is close. The center dots ar the same size (SFP Burris). I have had two failures with my XTR II 1-5, illumination failed, Burris replaced the scope, and now it has littl blacks specs all over the inside of th glass. The scope is currently being replaced again. This makes me a little hesitant to try another XTR II product. What is the general consensus?
  6. I have a 51679 and the STI mags fit without modification, they are a little snug at the top however.
  7. I was lucky enough to get in. I am wondering what the shooters banquet is all about? Having never shoot this match there is not much information online about the banquet.
  8. If a were to get in and pay, then for some reason could not make the match is any portion of the $300 refunded depending on how much notice is given?
  9. I got this scope in June, 4 matches and a bunch of practice latter the illuminated reticle failed during a stage today. Flashed on and off a few times then went out completely. Tried a known good battery and nothing. I am sure Burris will make it right but it is a little disappointing.
  10. I just want to confirm the dawson extended base pads do fit the mec gar para P18 magazines and they will fit in the 51679 model?
  11. I have sent two guns in to springfield custom and had their match barrels installed. Turn around time was about 4 weeks a few months ago. I am satisfied with the results. 6-8" groups supported at 25 yards shrank to 1.250" groups at 25 yards. Both guns can easily shoot under 2" all day. I would do it again.
  12. Just out of curiosity Mark why does Remington recommend to apply a light coat of oil to the gas pistons in the owner’s manual for the Versa Max if it is so bad? "17. Apply a light application of Rem™ Oil to the outside of the barrel, gas pistons, and O-ring with a soft clean cloth." From page 20
  13. Does anybody know of any stores in the Reno/Sparks Nevada rea that sell or STI magazines? Particularrly 9mm 140mm magazines and parts? Thank you.
  14. Just got one from Joe Bob Outfitters two days ago. Just signed up to be notified when it was in stock, took about two weeks before I got the notification.
  15. Just ordered one of these in 9mm. I want to convert it to STI mags. For those that have used the modified mag release from canyon creek, what is involved in fitting it to the gun and mags?
×
×
  • Create New...