ChaseMarshall

I use the Cooper Grips lava rock textured as well. They are awesome but you have to be careful about not over torquing the grip screws. The texture is the best though and they are cheap ($35) and come in lots of colors.

Cheapest: Polish internals 13# hammer spring next level: Polish internals 11.5# hammer spring extended firing pin and reduced power firing pin spring (need this when you go below 13# hammer spring) Reduced power trigger return spring Best option: Polish internals 11.5# hammer spring (or 8.5# and federals only) extended firing pin and reduced power firing pin spring Reduced power trigger return spring CZC Comp Hammer CGQ adjustible sear

That's funny, Let's see the rest of them.

Still waiting, I'll call again this morning

Yes

I don't think they will be able to seat.

Probably a broken trigger return spring

If you are under 2 seconds getting -0, it's probably good. Lots of other thing to practice that have a bigger impact on match results than the draw.

I just got off the phone with a rep at Optics Planet. They have 300 units inbound with an ETA of 9/5/15. I ordered 7/15/15 and she said I would definitely get one of those units.

Optics planet is getting these in and selling them to new customers Instead of shipping them out to the list of people waiting on backorder for months? WTF? I've been waiting like a good boy and OP is selling them rather than fulfilling backorders?

Then you are cheating

http://www.armadilloconcealment.com/Home_Page.html

How does the glass compare to the PST 1-4?

if you type G a s P e d a l it changes it to *thumb rest [generic]* G a s P a d a l is a trademark of GoGun USA

North Texas Multigun puts on great matches & they are having a match this weekend in Cresson. You can shoot it either Saturday or Sunday. http://www.northtexasmultigun.com/

Are the aluminum frames thicker? Does this mean the compact models with steel frames would fit? I can see how they may be a bit loose in the muzzle like my cz-75 is in the sp01 holster, but should still fit, correct?

Get the reduced power trigger spring and floating trigger pin from CGW as well. Cheap and good insurance. Trigger return springs seem to be a common wear item and the CGW is more durable and the floating pin makes swapping them a snap. I think the CGW type 1 disco is a valuable upgrade and is Idpa and production legal.

I have a TRS-25 and a Primary arms and I much prefer the Primary arms.

Back on topic: What constitutes a "heavy barrel"? If it is not allow it needs to be defined.

I am curious about this as well

I'm curious about this as well. I assume this would me a gun illegal for IDPA SSP as well. (I know the OP's gun wouldn't be legal in SSP due to the sight cuts in the slide)

I don't know what the 1st one is about, but the 2nd one is about Gordon Carrell's reshoot at the Carolina cup. There is a thread on doodie about the reshoot and Gordon wrote his side of the story on his website. (google: "Gordon Carrell idpa reshoot") Don't go to doodie project if you have thin skin. Anybody know about the 1st incident?

Mec-Gar 17rd AFC mags. I like them with the stock basepads and they are cheap and work well.

Extended firing pin and reduced power spring. (Come together) 11.5 lb hammer spring Reduced power trigger return spring (buy an extra for back up) CGW trigger pin Type 1 disconnector H-pin ( hammer pin) If you want to spend more and make it the best it can be also buy these: CZC competition hammer (do not buy the CGW race hammer -not IDPA or production legal) Adjustible sear (these two can be bought together Another hammer pin. All of this is available from the CGW site. You will want to buy the starter punch if you don't have one. Look at this thread for info on where to polish: http://www.brianenos.com/forums/index.php?showtopic=191773 I just did all this and I am very happy with the results, a new customer of mine shot it and told me to do one for him just like mine.

That sounds like BS, If he is distrustful he needds to set up a chrono. Contact your AC.