tackleman

Thank you Burned Out. I have starter loads of 6.8, 7.0 & 7.2. Yes Glock mags and they are working very well, put several hundred rounds at that length. Sounds like I am on the right track.

Yes I do have a chrono. Been loading for over 35 years. Just started using HS-6 and was trying to get a range of loads, been using Autocomp and having a hard time finding it. Found a bunch of HS-6.

I have a G34 with kkm match barrel with a carver 11 port comp and 11 lb recoil spring. Looking for some loads for Montana Gold 124 gr hp using HS-6. Been loading 6.6 & 6.8 grains 1.142 oal. Any help would be appreciated.

I am loading 124 gr. cmj round nose with 5.8 gr. Silhouette with an overall of 1.154. That seems to work, with an 10 lb. recoil spring. My next problem is several ftf with a reduced power firing pin spring. Will only have one once and awhile with a full power firing pin spring.

I have came to the same decision!

Still working on it will post when I find a remedy.

It cant be tuned. Here is the link to the Comp; http://glocktalk.com/classifieds/showproduct.php?product=33678

Thank you CocoBolo. Am trying to order powder now. I used 11, 13 ,15, and 17 Lb. springs.

It worked perfectly.

Thank you borh for the information. I have been reloading for 25 years or so, just not major loads for a compensator. The load I have been using was 124 gr. FMJ, 6.3 gr. Unique, which is high. This won't even eject the spent round and load the new round. So I'm switching to 9mm major loads.

I'm new to reloading with a comp in a G34. Looking for favorite 9 major loads. Any help would be appreciated!

I'm new to reloading with a comp in a G34. Looking for favorite 9 major loads. Any help would be appreciated!

I use Gun Butter. Very little of it. It will do a little better with hotter loads. Also I have decided not to use lead! You can not insult me. Any help with reloads using Unique, ( or another powder, I just have a lot of Unique ) bullet weight and overall length would be greatly appreciated. This is my first comp and really want it to work. Also I am fairly new to Glocks. I have attached a pic of my gun!

Any slow burning powder recommendations?

If the comp is reducing the pressure too much, what do I do?

I have a Glock 34 with a LWD threaded barrel and Maverick comp. Having trouble with slide cycling enough to eject the spent round and load the new round. Tried 11#, 13#, 15# and 17# recoil springs. Have tried several loads, including factory. I have tried 124 gr lead round nose with 6.3 grains of Unique, over all length 1.169. That is a little more than max load. Trying to find loads with Unique powder. Any help would be appreciated.

I have a Glock 34 with a LWD threaded barrel and Maverick comp. Having trouble with slide coming back enough to eject spent round and rack the new round. Tried 11#, 13#, 15# and 17# recoil springs. Have tried several loads, including factory. I have tried 124 gr lead round nose with 6.3 grains of Unique, over all length 1.169. That is a little more than max load. Trying to find loads with Unique powder. Any help would be appreciated.