[Single stack carry?]

Not competition related….but anyone carry a single stack pistol as every day carry?

I have read a lot of the pros and cons from different camps….but wanted to know if any readers have first hand experience.

I and looking at a short Colt 1911 style and considering going with 38 Super in caliber as opposed to .45.

any thoughts appreciated……it’s serious costing……

[DAA Alpha-Xi Magazine Pouch Magnet]

Mounted mine directly to the front of the belt….didn’t like the side of forward mag set up.

ordered the cover…..to thick for my 170’s…..went back to adhesive pad…..

[9mm VV Powder]

N320......quest over!!

[650 Powder Assembly?]

Thanks......

[650 Powder Assembly?]

I’ve been running a well used 650 for 9 mm for quite awhile......running my last batch of 9 mm the powder drop assembly seems to be dropping down with a “ thud”......it’s not a smooth action up and down as usual!

Any thoughts.....putting off Calling Dillon because they are still swamped

Thanks in advance......

[Who has made the switch - from open to limited and vice aversa??]

I went from Limited to Open a couple of years ago.....Old eyes were my driving force...really glad I did..optics will extend my ability to shoot for a longer period of time and the bonus I no longer wear corrective lenses to shoot pistol and optic rifle...Other than mechanical problems ...Open is a blast....

[Holosun Durability]

Agree with above...my only wish is an option of a larger dot on the 510c....I never use the ring on my pistols.....

[Holosun Durability]

Been running 2 510c on 9 Major Chaos Open......the only ones that have held up. Highly recommend!

Hope this doesn’t curse me !!!

[RF100 tips to tune it for Winchester small pistol primers]

My experience......used exclusively CCI small pistol primers.....RF level and plumb on a mouse pad , reostat perfectly adjusted and Dillon sent me several of the blue drop cups..replaced original. 99.5% success rate.

Decided to use up my remaining stash of Winchester small pistol......Went south fast...I’m convinced it’s the rough finish on the Winchester primers that hate the RF!..... I know everyone has good and bad experiences with all brands ...but I’ll be happy to return to CCI.

[Favorite Hunter's HD Gold Style]

HI-50.....whatever the standard yellowish color is.....they are self darken lenses....in Hawaii they should be excellent!

[Favorite Hunter's HD Gold Style]

Had them cut a pair of lenses for my Rudy Radon frames....very satisfied so far..only one match under clouds.

These do take some getting used to as the color schemes seem a little odd....time will tell.

Finally...what a great company to deal with !!!!!!....sent the frames in as requested , got a note that the lenses were good to go , returned as promised.

It is so pleasant to deal with people that actually care about the products and their customers...highly reccommend trying a set if you can.

[Best range surface]

See if you can find a school or company that has used Astroturf.

It really heavy but you will only do it once.....

[Cleaning primed 9mm brass?]

Thank you all....questions answered.....I suspected as much.......using a Hornady puller in a single stage....slow work!

[Cleaning primed 9mm brass?]

I am pulling a large quantity of loaded 9mm rounds and am wondering if I can put these primed cases in my corn tumbler to clean prior to reloadiing...times are tough!

Thanks in advance.......

[Pulling 9 mm rounds ?]

Same here....have some 147 Blue Bullets shot the collet will not grab....but the others do fine....tedious but worth recycling all those primed cases!

[Pulling 9 mm rounds ?]

Received my 9 mm Hornady collet yesterday and set it up on my single stage Lee press.

It did take some fine tuning....watched a couple of Youboob videos..helped.

Overall very happy...worked on 90% of my rounds....beats the hell out of Mr Plastic Hammer for volume.

thanks to all .........

[spacers for 2011 magazines]

My previous question.....what different spacers are needed for STI mags ?....I run really long COL for Major in my mags and have had an occasional hang up....just curious.

[How to..loading primed cases ?]

I am considering pulling multiple loaded 9mm rounds and reloading on my trusty 650.

What is the most efficent process to reload this brass?......concerned with primed brass interacting with priming station and resizing the brass itself before reloding,

Desperate times are calling for desperate measures....have had these loads sitting around for some time.

Thanks in advance.....

[Pulling 9 mm rounds ?]

Thank you to all.....the 9mm collet back ordered everywhere.....a little late with my brilliant concept..lol.

will keep searching....got a lot to pull.

[Pulling 9 mm rounds ?]

I have a large quantity of 9 mm rounds that I need to pull. I also have 2 Lee single stage presses.

is there any puller attachment available to speed up the process?

I have a Hornady cam puller , but it says it’s for rifle rounds only?

Thanks in advance......

[Reduced Glock 19 loads?]

Anyone have any suggestions for a reduced load for a GLOCK 19 using Precision Delta 124 HP and N320 powder?

Trying to reduce recoil for a small framed shooter without compromising effect for defensive rounds.

Thanks!

[spacers for 2011 magazines]

I’m confused......you need a special spacer for 9 Major in Gen 1 STI mags??

Wont the factory plastic spacers suffice?

I use 4 Dawson tunes Gen 1  140’s for match mags....interesting!

[Oldest USPSA Shooter]

These comments are very encouraging!......if the eyes don’t give out I have a goal!

Happy Holidays to all Super Seniors!!!!

[Recommended Texas Star ?]

Long term follow up on our Red Stitch star....extremely satisfied.....had some bolts come loose but the magnet system has held up well.

Ordered some spare magnets and haven’t used any......highly recommend!

thanks......

[Major Pistol.....temperatures?]

Anyone have any experience with temperature effects on MP........it’s definitely my choice for my Chaos!

thanks in advance