cody123

........

i use alot of wst 4.7gr under a 200gr lswc and 230gr lrn

crap that filled up fast . is their any hope of sending in a application for thursday pm match and getting in . was suppose to squad up with friends for the pm match . anyone able to switch to sunday and sell me your spot?

jager steel guide rod for a g34 and flat spring weigh in at 453 grains on my rcbs powder scale

just currious do they make and sell slides for gen 4 glocks ?

What size front fiber optic did you buy? I've got a Dawson rear adjustable and front fiber optic height of .300 No issues adjusting the Dawson to exactly where I want. i have this rear sight might be different from yours https://www.dawsonprecision.com/ProductDetail.jsp?LISTID=1710000-1093363057 and i have a 100 wide and 335 tall fiber optic front sight i have turned the adjustment screw from all the way out to all the way down on the slide and did the same with another person . the change in rear sight elevation didnt change point of impact for neither of us. gun shoots a good group and shot good with the stock sight but the darn stock plastic one wouldnt stay put able to push out with index finger.

Glad to see I'm not crazy I've turned that stupid screw seems like a million times and poi won't change alway about 5 in high at only 15 yards

You sure about that. I load 4.3 wst and it only averages 720fps 166pf with lead 230gr rn . I'd have to look but you oal sounds really long as well. Ether way this load is very soft almost 9mm soft

thanks kind of strange that some of you see it and others dont , mine is a mess from the top of the dies down ward but weighing each charge it always right on the money. it just more of a mess issue then anything. great idea. what do you mean by the side that does slide?

graf and son grafs.com has both sets of dies instock

wanted to see if anyone here uses winchester wst powder and if they have a problem with the powder seeping through the gaps in the powder drop slide or if mine is broken. i have 3 different tool heads one with wst one with 231 and one with silhouette and the other two have no problems . every time i use the wst after every pull of the handle is seems like its a grain that goes flying of the powder drop slide .... its on a dillon xl650 if it makes a difference . thanks

i just picked up a stock sti trubor 2011 in 38 super . managed to find these powders which should i start with and what are some accurate loads. only have the 124gr cmj from montana gold right now was planing to get .355 m.g 115 jhp or the zero .356 115 jhp if it ever comes back in stock are these good or should i be looking else were using cci spp powders that i was able to get are vv 3n38 vv n105 ramshot silhouette thanks

what did you order? i got a red dot mount barrel and comp. he is waiting on the kkm barrel for the g34 right now if by chance you ordered the same thing did you enter the right email or check the spam folder? i got 2 automatic email right after i placed my order last week. also he responded to 4 or 5 of my email within a few hour maybe try again.

who all has the sjc cmore mount? looking at getting the sideway mount one so i dont have to mess with the ejection port as well. how difficult is installing the bushing in the frame? does anyone have any picture of the install? and finished product? if i get this will i have problems if i remove it and shoot a idpa or something once every few month? i assume the bushing that you have to install in the frame is either flush or below flush in the frame right so no problem with it holding up in the holster thanks picture would be great of everything you have to mod to get it to work . i have a gen 4 if it makes a difference. thanks again

what is wrong with me? i could get a nice group maybe 2inch max at 10yards with the factory g34 sights . i changed mine to the dawson fiberoptic 100w and 310 high front with the newer style bomar adjustable rears. now my group at 10 yards is like 4inch. also seems like no mater how much i adjust to bring poi and poa together it does work. im shooting right high. so i adjusted the rear sight the the right and down, is this the wrong way? reason i changed them was my stock ones are plastic and they were not even across the top . also i dont care for the rear sight picture i have bad eyes and the all black with f.o front helps out.