Jump to content
Brian Enos's Forums... Maku mozo!

reno92

Members
  • Posts

    7
  • Joined

  • Last visited

Profile Information

  • Gender
    Male
  • Location
    Valley City ND
  • Real Name
    Bruce

reno92's Achievements

Looks for Range

Looks for Range (1/11)

  1. 40 tactical. 3.7 grains WST and Berry's 180 plated at 1.130. .422 crimp, is a laser beam for me,
  2. I have an older gen 3. The rcbs dies wouldn't size the cases enough to run in my XD or M&P. I had to use the EGW die to size them down enough. The newer glocks have tighter chambers from what I have read. It is a real issue. Depending on what gun the brass has been run through. Some of my brass is once fired glock brass from ten years ago. I put in a storm lake barrel and ran all my brass through the EGW die so I am good to go. Other brands of dies might size more than my particular set, but maybe not.
  3. reno92

    FTRB

    figured it out I believe. some how or another the safety plunger spring got wedged and wouldn't let the plunger move freely. now it appears to work fine. now on to the malfunctions when I actually fire it. all other movement in the firing pin seems okay. there is a certain amount of drag on the cups to the channel liner which I think would be normal. So, Papa Bear it appears We are neighbors. Valley City ND. Thanks for the help guys.
  4. reno92

    FTRB

    With the trigger pulled. The slide will go forward unto the slide touched the hood on the barrel. 1/4 inch or thereabouts. When I release the trigger it moves forward the rest of the way.
  5. reno92

    FTRB

    I will try to get the above mentioned parts ordered, and try it out. Got a match coming up this weekend. I don't know if it will be ready by then, but if I can get it running good that's what matters. Thank you for Your help.
  6. reno92

    FTRB

    Would this problem manifest itself while shooting? Reason I ask is I am running 135 pf loads through it and had many ftrb malfunctions with it. Especially after running a 13 lb spring with Wolff striker spring. Had been running okay with a15lb spring. After the malfunctions I put all factory springs back in and noticed this issue with the trigger.
  7. reno92

    FTRB

    I have a police trade in glock 22. With brand new factory springs ie recoil, striker the gun will fail to go into battery while trigger is held back. My gen 4 32 does not do this. I first tried the springs that were in the gun, when that didn't work I tried brand new springs. Same result. Is this normal for a gen 3?
×
×
  • Create New...