Jump to content
Brian Enos's Forums... Maku mozo!

n0n0sWitnessGT

Members
  • Posts

    9
  • Joined

  • Last visited

Everything posted by n0n0sWitnessGT

  1. Kamicosmos, how your load are doing with the IMR 7625 ?
  2. I took my Tanfo yesterday and before I put it back I found out the cokking handle is loose . I try to look over it to see how it's secure , I can't see if it use a set screw , I know it's going to be metric , can anybody confirm this ? Thanks
  3. I think that the conversion it's about $ 585.00 with a 12v port ( compensated) and yes if you call them you will have a direct answer. 'B,
  4. Well I took the wire measurment and did the calculation. The One in the gun , .093" about 4.59Kg or 10.1 Lbs so this one should go for the factory barrel the .098 is 5.37 Kg or 11.8 Lbs the .103 is 6.15 Kg or 13.5 kamicosmos what powder are you using , I only have Titegroup and H335, and so far nothing on sale , so I'm gonna try my first reload 125RN cst, cci primer with 4.8 and 5.1 gr. thanks for the input .
  5. Do any of you know the value of the three springs who come with the WGT ? Two are still in the plastic bag one about 5.xx and the other 6.xx what about the third one and what spring should I use for the "factory " load thanks
  6. I'm ready to try it out, I have some old reload, not the perfect way to start it but that's all I have . I hope it all go right.
  7. I place a call to c-more and they do not offer a serendipity without holes ( I think they mold it like this ). So I'm returning it for an exchange and will use a 90 degree from a member , my biggest concern about the 90 degree is about blocking the vison on the left side , the only way to found out I guess is to try it. Hopefully the turn around will be not excessive
  8. I finally did the step and got a tanfo thank to my friend in France . I just bough a c-more serendipity and found out the bolt patern .750 do not match the metric one from the Tanfo , 10mm space 4 mm metric. I read on this forum that the Seren. can be cut and re-drilled to sit lower and mach the hole of the tanfo. I try to find some picture this last weeks without succes. I just spoke with C-more and they say I can return the sight to have it change for a rail , but I will have to buy a mount ( no clue if they are in stock) plus other problem it may create, ejection. I have access to a machine shop so anything is possible is I get the few basic dimension. So , as you can figure out I'm clueless of what to do, any advise(s) will be greatly appreciated.
  9. Hi, Bruno here, been in the IPSC in Belgium in the 80's and finally decide to get a Tanfo GoldTeam in 38 super :thanks to my friend in South of France, ( I told my wife it's all his fault LOL). Now just have to learn how to use it and reload for it, been shooting for 30 years , learning is ongoing and questions are coming.
×
×
  • Create New...