-
Posts
154 -
Joined
-
Last visited
Profile Information
-
Gender
Male
-
Location
Allen, TX
-
Real Name
Joel Gabrelow
Mastiff's Achievements
Looks for Range (1/11)
-
So I am assuming (similar to the other gentleman's post), reloading is nothing more than a chore for you. Would it be fair to say that you reload only for 100% economic reasons? Or do you load odd calibers? I want to hear why reloading for you is tantamount to chewing tinfoil. It sounds painful. Dog
-
More indexing problems on the 650
Mastiff replied to Overscore's topic in Dillon Precision Reloading Equipment
Ah, the ole ring indexer! A well known catastrophic breakage. Depending on how fashion minded you are, the ring can come in two colors: creme and black. If I recall, in order to snap a ring indexer, you gotta pull the handle pretty hard. Dog -
.223 Brass New Year's Resolution?
Mastiff replied to Mastiff's topic in Dillon Precision Reloading Equipment
So would I be correct in saying that you're buying and firing new ammo and keeping the cases? Or? Dog -
Please Recommend a Book on Cleaning & Maintaining AR-15's
Mastiff replied to Mastiff's topic in Rifle/Shotgun
Thanks Steve. -
Can any of you recommend a book that has a good chapter or emphasis on cleaning, maintaining and disassembly and reassembling the Colt AR-15? Thanks. Dog
-
.223 Brass New Year's Resolution?
Mastiff replied to Mastiff's topic in Dillon Precision Reloading Equipment
Full Auto, I hear you and you make some valid points. If you're sorting the head stamps and dumping the bad stuff it's fine. I just don't have all the time to do that, and what little time I have, I'd rather work with cases I know we're mine. Based on your usage, I go through just a fraction of that amount. Dog -
I think there are more threads on case preparation and reloading techniques specifically on .223 than any subject on the reloading forum. I have been reading, responding and starting topics on .223 ad nauseum. I've given this a lot of thought. I think I'm going to sell all of the used 223 brass and not describe it as "once fired" even though that is the way it was sold to me and many of us that buy it. I just don't trust the once fired claims, but that's another topic for another day. I think I am going to take a different approach. Long before the craze I put away some new .223 brass that I thought I'd reload one day, sound familiar? I figure I'll know my own brass was really once fired and cycle them through the reloading process until it's time to say goodbye. My brass, rifle chambers, dies, XL650, tumbling, well you get the idea. I'm just tired of the junky mixed brass out there and the reloading inconsistencies I experience (and read about). And then there is the decap pins breaking on the crimped primers, the swaging, the primer pockets too large, how many times the case has been stretched and trimmed, etc. I suppose the guys who carefully sort out the head stamps and trash the culls on the used brass can do ok. I just don't have the time or desire to sort brass. Are there many of you that start out with new brass and never buy the used cases? For my bolt rifle, I do make new rounds on my Redding press, but the quantity I make on the single stage press is a tiny fraction of what I make for the AR using mixed brass. So, does this all make sense? Rant? Or just another useless New Year's Resolution (like eating better and exercising)? Dog
-
I neglected to say that I chamfer both the I.d and o.d. as well. I like the smooth edge and I also hate shavings around my seating station, so I think you are not OCD. I think I'll try reloading with out the expander (and with it too) as well. If it works fine, I'll be happy to eliminate the tool. I do not crimp. Dog
-
I'm not great with rifle reloading and still learning, but I think you have this absolutely Correct. I am using the Hornady OAL system and the actual chamber as my case gauge for my Browning .223 x-bolt, it's fussy about what it likes, otherwise the bolt will not close. For this rifle I am handloading Lapua brass, Reloader 7, CCI bench primers and Sierra #1400 bullets, OAL is 225 and it loves them. I do not crimp. I tried out the new ammo and the Browning today at the new Frisco Gun Club range in North Dallas and the rifle worked beautifully. Now if I can get the scope set up right, well, that's another story. The AR-15, at least mine, will handle a wider range of OAL. Every brass case, regardless of the rifle, the measurement that remains the same is the 1.75 trim and debur I.d. And o.d. I have to learn more about shoulder bumping, neck bushings, and more info. I bought the advanced reloading DVD and learned a bit, but I am wanting to learn more. I just keep reading. Dog
-
I asked this same question on this forum. Mine is the 1200 and not the B unit. Yet, I bought it new in box, so I was equally perplexed. I decided to forget about it and use it. I just couldn't find any difference, has anyone asked Dillon? Typically whenever there is a letter, it means there was a change or an "up rev" as we used to say in my blueprint days. And when I say I just went ahead and used it, I am D- user after damaging my trim die on my first outing. Don't knock your self out, get the thing dialed in, read the instructions and enjoy. Also, there are a zillion threads on the 1200. Everyone has a different way of using it. I just started a thread on how I intend to use mine. Repetition of discussions on the same issues is very common on this forum. It's like telling my adult children the same story again and again. I call it a "ginkgo biloba" moment
-
Give it another few months for the .223 thing to lose steam. As much as I like to see new folks getting into the hobby, I'd bet a lot of them didn't know exactly what they were getting into, especially rifle reloading. It's hard enough even after years of experience. Rifle reloading is not for beginners, at least in my opinion. I predict there will be a lot of 2nd hand machines and accessories on the market. Dog
-
1. .223 range brass mixed stuff 2. Decaped 3. Swaged 4. Cleaned I have the cases sitting in a bin. On the bench is all Dillon: Empty tool head RT1200 223 size/trim die FL sizing die Assume I'm going to use the finished rounds for my AR15 at the range, not competition. So here's what I would do: I will have only two tools on the tool head in this order: #3 RT1200 to size and trim, then in the #5 the FL die turned up to do the inside diameter of the neck and then fall into the bin ready to go on the reloading tool head. Done. Good or no good? Dog