Jump to content
Brian Enos's Forums... Maku mozo!

thompsoncustom

Classifieds
 View Profile  See their activity

  • Posts

    450

  • Joined

  • Last visited

 Content Type 

Everything posted by thompsoncustom

  1. thompsoncustom
    We are a sponsor on the forum, we sell mostly ar-15 stuff but I have a soft spot for CZ pistols so we sale the mags for them just above cost in the clearance section on the site. https://aerospacearms.com/clearance/
  2. thompsoncustom
    I wish they offered 170mm extensions for the small frame CZ's.
  3. thompsoncustom
    I ended up taking a 32rd pro mag and cutting it down to 170mm with a flat base pad. Also replaced the internals with the gram follower/spring setup and it holds 27rd and has ran flawless so far. I should also note that I removed the finish on the mag and removed some material in areas to get it to drop free.
  4. thompsoncustom
    No that barrel with not fit. Your barrel diameter is .550 and the standard barrels are .500. Could you have a bushing made to except the new barrel...probably. Also on top of fitting it to the breechface/extractor you would also need to fit the bottom barrel lug/peanut.
  5. thompsoncustom
    That is super sexy tho.
  6. thompsoncustom
    Something you could try is polishing the breechface and/or swapping the extractor. Ive had to do a little work to the extractor claw on a couple cz's to get them to feed thicker rimmed ammo. Are you running the stock extractor spring?
  7. thompsoncustom
    Here is another picture for ya. Like i said earlier id recommend the PCR trigger for you just because its the same as the black recurve/sp-01 but with some mild serrations for traction. But any of the recurve triggers are going to make a big difference. There is a couple other triggers not included in the photo.
  8. thompsoncustom
    I think the PCR trigger might be a better fit for you. Its the same profile as the black recurve but has some serrations on the trigger pad so it doesnt slip off.
  9. thompsoncustom
    if you really want a crazy amount of texture get some 36 grit silicon carbide and epoxy it on there. 36 grit might be a little over the top tho
  10. thompsoncustom
    No sir that one is not mine.
  11. thompsoncustom
    I used a Czechmate racker on my sp-01 shadow open build. By using a longer set screw you can push the racker up into the dovetail making it tight but would probably be best to add some material to the bottom, tho mine is just held in with some loctite on the longer set screw and hasn't moved yet.
  12. thompsoncustom
    Hmmm I wonder if AA7 would work well with a 115gr bullet in the 9mm v12 than. I have no experience with a v12 but 10gr of aa7 behind a FMJ out of my CZ (No poples holes) makes 175pf so maybe with a coated bullet and a little more powder it could be done at a less than insane pressure?
  13. thompsoncustom
    Id be curious to hear some of the 9mm load data for the v12. Are you guys running really slow powders like aa7 or using coated lead bullets for more velocity?
  14. thompsoncustom
    cool, now lets see some pictures of that bad boy mounted. I've been consider putting one on my shadow but I'll wait till you can purchase them in the states.
  15. thompsoncustom
    I would image just the barrel and possibly the barrel bushing. I would just through both away and get the CGW 10x bushing and fit the new barrel or send it off to CGW and have him fit them.
  16. thompsoncustom

    CZ75 magwell?

    thompsoncustom replied to Storz's topic in CZ

    The CGW magwell does not work with the standard mec gar base pads. They sell a aftermarket base pad that will work with the magwell or you can modify the +2 mec gar pad.
  17. thompsoncustom
    My cz will make major with a 124gr and 6.0gr of WAC
  18. thompsoncustom
    Makes sense that the SO would be more accurate than the Shadow 2 since the SO has a hand fit bushing and some of the factory bushing have a little play in them. A CGW 10x Production legal bushing will give you the same accuracy as a accu shadow.
  19. thompsoncustom
    I have the NIB lightweight BCG and haven't had any issue with it so far, good BCG for the money.
  20. thompsoncustom
    N310 is gonna be one of the softest if not #1
  21. thompsoncustom

    New shadow 2

    thompsoncustom replied to wingnut's topic in CZ

    It would probably just take the same modification as the CTS (TS upper 75 SAO lower) does.
  22. thompsoncustom
    Ya it is. My barrel is really fast tho so i make 180pf with 10.0 grains still a great shooter tho.
  23. thompsoncustom
    That's what I do. (Have3n) if you are having trouble getting through the trigger sharpen the drill bit yourself on the grind I know when I was trying to dimple my barrel it didn't do anything but spin than I sharpened it and could have drilled right through the barrel if I wanted to.
  24. thompsoncustom
    I wouldnt call WAC a slower powder tho when it comes to open guns. Actually its probably the fastest powder ive used in my open gun.
  25. thompsoncustom
    AA#9..... now that's a slow powder By effort do you mean keeping all the powder in the case and not flying out when the press indexes? The charge has to be in the 10-11gr range but I think it would all fit.
×
×
  • Create New...