Jump to content
Brian Enos's Forums... Maku mozo!

dtuns

Classifieds
  • Posts

    378
  • Joined

  • Last visited

Everything posted by dtuns

  1. Hunters HD gold are awesome and now they make a red lens that makes the dot even better. I've only used gold lenses as I live in Oregon and overcast most of the year the golds will get darker when suns out.
  2. I run RMR 124 HP with 3.8 of titegroup close to 140 PF
  3. On My prodigy EGW ignition parts dropped in but had to refit the stock thumb safety.
  4. Last weekends match 58 shooters not one production shooter and this coming weekend 82 signed up no production shooters. Level 2 Sectional match coming up in July has 167 shooters and 4 production shooters.
  5. I put in the EGW kit and the tuned sear spring following this video and I have a nice 2# trigger.
  6. I put an EGW fire control kit in my prodigy had to refit the stock thumb safety also had to fit Atlas trigger shoe and bow.
  7. Even with .40 and .45 die can only go down to shell plate.
  8. What grip is on your prodigy and did you have to do any fitting?
  9. If you Shoot IDPA bolt locking back is beneficial as they make you download magazines often and have reloads on the clock.
  10. I've made a few purchases no issues.
  11. Shootsteel are nice. I have 3 mini poppers.
  12. Unless you can't find the Titanium in stock? Thanks for the info.
  13. The holes in post below the case feeder are for bullet feeder that's why its so tall. If you cut it down won't be able to mount FA bullet feeder.
  14. Has this ben replaced with the Redding NxGen Carbide Sizing Die?
  15. You need 54 inches between the top of your bench/mount to the ceiling to fully open the hopper lid
  16. I'm using TTI base pads and these fowlers and getting 25+1 in My M&P https://csrgstore.us/products/csrg-multi-platform-competition-follower-spring-kit
  17. That amount would only matter if you were rifle bench rest shooter. Pistol no issues.
  18. Don't email you need to call them and if you don't want to wait on hold you can leave a call back number and they will get back to you. I broke my case pusher my fault called to ask where I could by they sent me 3 new ones for free.
  19. I also recommend these I had to shim 9MM and .223 shell plate up with one of each for .012" total thickness fixed a lot of the case pusher issues. 1 98055A513 1074-1095 Spring Steel Ring Shim, 0.2mm Thick, 70mm ID, Packs of 5 1 Pack 1 0 8.62 Per Pack 8.62 2 98089A513 18-8 Stainless Steel Round Shim, 0.1mm Thick, 70mm ID, Packs of 1
  20. I went from LNL to X-10 got it running smoothly a lot quicker than it took on LNL. I recommend checking every screw and bolt and make sure its tight.
×
×
  • Create New...