stickboy44

So as of the updated rules for production, can grind my safties flat? I don't want the single sided flat safety .

Thanks

Should I be concerned about these machine marks on the barrel down by the peanut? If so how should I remove them?

You can wiggle the pin in my slide stop. My other slide stop pin in my other stock 2 does the same thing. I have no problems with the back up.

The gun is clean, that was the first thing i did. If it was a recoil spring i think it would happen more consistently rather than a couple times on a stage. I have shot a stock 2 for 3yrs. And never had a problem with my thumb coming in contact with the slide. I just bought this gun off some one who just threw parts in the gun. I went through the gun fitted and polish everything to make is correct. The slowing down part i think is when the slide is moving to the rear of the gun. It doesn't cause any malfunctions or feeding problems. And yes this is a question if anyone has experienced this problem. Thanks for all or any input.

For the last 2 matches i have noticed the slide cycling oddly like something is hanging up or slowing it down. It only happens a couple times per stage, and have not had a chance to reproduce the problem in practice yet. Nothing in the gun looks like there is unusual markings or wear on any of the parts. It is a stock 2 with 1 piece sear, titan hammer, bolo, ex.firing pin block, henning guide rod, 8lb. Recoil spring, and the barrel is reamed. I can definitely say it is not a ammo problem.

I'm running android tablets for praticscore. How do you create a master shooter list so when people sign in their name is already there. We have just been loading a previous match so the people's names come up....but im sure there is a better way

Western PA Sectional JULY 13, 14, and 15 2018 Clairton Sportsmen club in Clairton Pennsylvania Match fee is $90 which includes lunch and a match shirt. It will be 9 stages plus chrono Registration is on Practiscore

Yeah I do have a set of them and I do like them.

How thin are the Lok gips in comparison to the scales. Do they have any palm swell or are they flat

Besides the new par times, is there any new drills or info in this book? I have his last dry fire book.

Should I clean up the burrs and keep shooting it?

It's a 9. I got the gun used and I have about 20k through it.

Yeah I do have the same kind of marks in the top of my side. I know how the barrel and slide sit together but I was just concerned because it look like something is getting hammered.

Has any one ever seen these wear marks on their barrel of their Stock 2 ? The gun runs with no problems.

Thanks to the Match Director and staff for a great match!

Stages are up on club web site. Also you can find match info and hotels in the area at http://www.clairtonsc.org/

If the ammo is loaded short enough that it passes the plunk test, is reaming a barrel going to fix light strikes

The hammer goes half the distance in DA compared to SA. I did hit the wing of the BOLO and i habe a factory plunger spring. I polished that area pretty good where the bolo contacts the trigger bar.

I just seen on the PD web site that they recommend the Extreme sear and titan hammer installed with the bolo. I screwed up the first bolo i tried to install, the second one works but im not sure the hammer in DA is coming back far enough..that could be my light strike problem in DA

Is the EAA / Tanfoglio Witness 1 Piece Sear and the Extreme sear the same besides the finish?

I feel I'm plenty deep on the primers

No but I will try one. I have only ran wolf and PD hammer springs.

I have been having some light strikes too. Everything in my S2 has been polished twice. It only happens on DA. I have a Titan hammer, 1-piece sear (not extreme), bolo, extend firing pin block, PD: firing pin and spring, PD hammer springs from 12 to 15.5 lbs. I'm currently running the 14lb. hammer spring. Things I have ruled out of being the problem: removed firing pin block, polished the crap out of everything, I do have a factory plunger spring in the gun, ammo is not a problem (I'm running winchester primers) and my OAL. is good (pass the plunk test)...

2017 Western PA Section Championship Registration is open on Practice Score Match starts: July 14, 2017 @ 9:00 AM · Match ends: July 16, 2017 @ 5:00 PM Location: Clairton, PA 15025 2017 Western Pa Section Championship. We will be running 8 stages plus chrono with a round count 250 plus. This is a Trophy match with a double blind draw for sponsor provided items. Lunch and Match shirt will also be provided. Match Fee: $85 for adults and $50 for Juniors USPSA level II match, with the following divisions: Limited, Limited 10, Open, Production, Revolver, Single Stack, PCC Price:$85 You can find match info and hotels in the area over at the Clairton Sportsman Club web site. http://www.clairtonsc.org/