jedmyers
-
Posts
121 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by jedmyers
-
-
-
Hello I'm going to be loading for my CZ SP-01 Shadow for production, and I'm needing some help on the load data. I have on had some xtreme bullets 115 gr., and some Winchester 231 powder. I have searched and haven't really found anything recent or exactly what I'm looking for. Thanks!
-
I agree, I'm intrigued by these new mags. I'm really interested in giving them a try, especially if the solve the issues everyone is having regarding trying to fit the svi mags in a Sti frame.
-
That's awesome, I just looked up the website. they look like a great design. I'll be keeping an eye out for when their available. Thanks!
-
think I need to get hold of some older SV mags then
Just hold off a little while. New mags are coming out soon. 30rd big stick $160 complete
New SV Mags?
-
I appreciate all the help. I do have one more question. I've read where some bullets are .356 in diameter and some are .357..does that matter?
-
thank you very much. I appreciate all the help and suggestions I can get.
-
I've been doing some searching, looking for some load data for a 38 super. Everything I have found so far is fairly old. Does anyone have a good 38 super load using Silhouette powder? Thanks for your help.
-
38superwes I sent you a pm
-
thanks for the help guys, I shot it today and seemed to go well. I've been told to shorten my OAL up a little bit, so ill try that and shoot a match next weekend.
-
Awesome I appreciate it guys. I will check them out and hopefully get them going
-
ive shot one full match with my Sti using the svi mags. It didn't go well, the bullets would nose dive right into the ramp. So I'm trying to figure out if maybe the bullets are to long or if it's the mags. As for the sps mags, I've got 3 tubes, 2 140's and a 170 but I've never used them.
-
just an update on this issue, I received my CK Arm mag catch today. it solved the issues with my mags not dropping out of my gun and you don't have to force the mags in the gun for them to catch.
-
I have. You have to jam the mags in for the catch to grab them, which of course when you go to drop the mag it doesn't drop freely.
I ordered the ck arms mag catch to give it a try, as I heard it works well with no modifications. It should be in Thursday.
-
thank you, im realizing that's going to be the easiest way to go with these
-
I just received 3 SVI Mags for my STI open gun. Ive done a lot of searching and I was curious if anyone has found any new tricks to make them works efficiently in my gun. Does everyone still file the mag catch hole or modify the mag catch itself? thanks!
-
Thank you guys! I just bought the gun and I'm honestly not sure what in it for a spring. I just worked up a load for it today so I wanted to make sure the spring is ok as well. As for ejecting the brass, it does throw them a fair distance.
-
Hello, can anyone tell me the best way to determine the correct pound recoil spring needed in an STI 2011 9mm? Thanks!
-
Does anyone have a good load for a 9mm limited minor, using 147gr copper plated bullets and silouette powder? Thanks!!
-
I have some Winchester 231
You'll probably like about 3.6 gr WW231 with your 147 grain
bullets - so I'd start at 3.2 or 3.3, and work up with a chrono
watching for signs of pressure.
OAL should be in the 1.125 - 1.135" range. But, you'll have
to make sure that works in your gun/mags.
thank you very much! ill pick up some bullets and get started!
-
I have some Winchester 231 & silhouette
-
thank you guys for the help! now I just need to figure out a load for some 147 gr copper plate bullets. thanks!
-
Winchester 231 & silhouette
-
Hello! I just picked up an STI 9mm with a 5" barrel. I am needing load ideas for it. I will be shooting limited minor and 3 guns with it. Thanks!
Binary Eng Comp
in Open Pistols
Posted
Hello, I ran across these comps today. Has anyone had any experience with them? The seem to be well built. I'm curious for a build I'm working on.
http://www.binaryeng.com/products/cfd-titanium-compsensator
Thanks,
Jerrod