Jump to content
Brian Enos's Forums... Maku mozo!

vaskeet

Members
  • Posts

    4
  • Joined

  • Last visited

Everything posted by vaskeet

  1. where can I get a micro switch like dillon uses for the xl650 case feed. This is when I miss Radio Shack stores
  2. I use the standard AA model and have had no problems with it on a RIA 9mm 1911
  3. I have had problems with 2 of them 1 just stopped full cycling and could never get it to cycle smoothly it would drop a charges for a while then it would stick and not drop the other the gears inside broke into pieces I have gone back to the lee pro disc
  4. I have 4 mec 9000Gs that I have used for over 25 years with very few parts needing replacement (fingers, bottles(plastic cracked due to age) and 1 hydro cyl.) I shot comp skeet for many years (high volume) I load 7/8 oz 12 ga loads with 700x and have not adjusted anything on the loader in 20 years or so. I made plywood bases for the mecs (slightly larger than the base of the machine) and put 4 bolts facing up from the bottom of the bench (standard nut on top with a wingnut to secure base to bolt) to switch from one ga to the other loosen wingnut, set machine with wooden base over the bolts tighten wing nuts and away you go . I have a cut out on the table on the left side of the loader (looking at it) so loaded shells drop through the hole into a plastic box on a shelf under the table and another hole drilled under the loader for spent primers
×
×
  • Create New...