Jump to content
Brian Enos's Forums... Maku mozo!

HOGRIDER

Classifieds
  • Posts

    1,736
  • Joined

  • Last visited

Everything posted by HOGRIDER

  1. Good place to see what current, similar pricing is........ https://www.brazoscustom.com/buildyourowngun
  2. @quiller I'll chime in and say I've been using the Apex 10 that comes with the 11" high speed feeder, for just under a year. Once I fine tuned the case drop port, the funnel sensor, and installed the DAA Turbo Case Feeder Plate, it has not missed a beat loading 9mm. Regardless of the feed speed I select. The DAA plate made a huge improvement in the overall operation and feeding.
  3. I followed my standard procedure for the S2O of determining Max OAL and finalized at that length. Just so happened the MAXX and LOC also yielded excellent accuracy and function at that length!
  4. I also loaded PD 124 JHPs to 1.080" for the Shadow 2 Orange. Kept the OAL for a Sig P320 MAXX. Got the MPA LOC and decided to try that match load. Reduced the powder charge just a bit; but worked perfectly and I'm over 1K rounds through it with this same OAL! Bench rested example:
  5. Loading 115g or 124/125g I would definitely take a look at VV N330! https://www.vihtavuori.com/powder/n330-handgun-powder/
  6. IIRC, the Open and LO Comp pistols share the SS grips and magwells. LOC Magwell uses a set screw tightened against the mainspring housing to complete installation; which also stops the rattle.
  7. Thanks for the heads up! Hope to see you there!
  8. Good luck with your plans! If Tim is in Lexington next year, I will do my best to get in that class!
  9. I hope to make Bluegrass outside Lexington, KY early next year! Great facility! Really looking forward to this one next month: https://practiscore.com/putnam-county-gene-richmond-memorial-uspsa-match-oct-29-2023/register?fbclid=IwAR32SsgMVv_2LSyxnJLGfLRJmEhyGpP5_taNMybVJsjSTr9Gz1vj2d0lCWU_aem_ASGQAYBS04pno8NEjeRjTFxKTsq90csfGxl_X3UKRFCgTf0aqdHR8DqEqIk0DIiE6fM
  10. Unfortunately, I haven't made it into TN.......yet...! I would like to experience the ORSA outside of Knoxville; maybe next year!
  11. @808mattAs a Distinguished Senior that's been away from active USPSA competition for a LONG TIME, I'm now in my second year; and my first year of shooting a Red Dot on this awesome 2011 platform. As I mentioned in my post above, there were some changes I made to suit MY personal preferences on the LOC and it's running better than when I received it! I can definitely see improvements in my match results; especially after my changes. Hope to get at least another 3-4 matches in before the season ends; but I'm having a ball and for me that's most important! HTHs!
  12. @Bmb2578Not sure if your addressing your question directly to me; but if so, I now have 5 local matches using the LOC and the fit/function is excellent! Being a LONG TIME student of the 1911/2011 platform, of course there "were" some things I disliked; but I have rectified those issues and the pistol is definitely exceeding my expectations! IMO, if you have previous experience with custom competition 1911DS/2011 type pistols, you'll be in a better position to fully appreciate the Open you've ordered! I too plan on having an Open pistol in the future! Good luck with your pistol; and I'm sure shooters here will like hearing your experiences!
  13. https://lokgrips.com/gun-stands/aluminum/gun-stand-raw-aluminum/
  14. Current config with a couple of subtle, personal changes...........
  15. For my LOC I ordered the Double Tap Ambi Shielded safety. IMO, it has the standard competition angle that fits my hand/thumb perfectly. I do ride the safety......... AFAIK, the LOC comes with a one piece guide rod and plug that takes an "L" shaped paper clip for takedown. I immediately replaced it with the Dawson 5" tool-less guide rod; and it has functioned flawlessly! Pics with my latest match load results.....it's definitely a shooter!
  16. When I first had access to a Ransom Rest, I tried to research all I could to understand it and get the setup right. Even talked with Michael (Ransom) at length; and one of the first things he pointed out was to NOT overtighten the grip inserts! Two finger tightening process on A, B, and C. Also emphasized to start with 20-25 rounds of junk/over the counter ammo through the pistol to "settle" it in prior to actual testing of my loads. One thing I had to do on the S2 Orange was remove the LOK grips, and test with the stock OEM grip panels to get good even purchase on the frame. Always attempted to get the front and rear gaps as even as possible. Lots of good info in the RR Operation Manual and of course on YouTube. HTHs!
  17. I posed the question of offering an alarm activated Primer Orientation Sensor for manual operation loaders using the M7 Apex 10. A very seasoned commercial(?) operator suggested adding a Pattern Match Camera that would completely satisfy the need. Any electronics veterans that could elaborate on this; and if it's even a reasonable cost consideration? Sounds expensive to me!
  18. There was that option to remote the primer pocket on the RL1100............IDK about the 1050......
  19. Moved from an RL1100 to the MK7 Apex 10; and in addition to the 10 station advantages, was the offer of using Primer Orientation Sensor once I automate. Like you suspected, the MK7 was designed to allow the simple addition of the POS with automation. Sadly, the RL1100 has no design feature that I'm aware of that would activate some sort of alarm to alert the manual operator; or stop automation. Definitely not a fault of Mark 7! And since, IMO, primer issues/failures are the number one complaint with all the major progressive presses, having a type of primer orientation sensor right after the priming station would be such a great option!
  20. I'm another proponent of the Hornady One Shot! And I actually put 200-300 cases in a large "tupperware" container, spray and shake; then I shake the container to allow a good number of cases to stand upright. I then lightly spray again allowing the HOS to get inside cases. NEVER had an issue with any of my loads using VV N320 or N330!
  21. Have two of the Savior Equipment pistol cases, and have to say they are excellent quality and construction! Highly recommended!
  22. When the @RangerTraceoffers advice, LISTEN CAREFULLY!
  23. Me and the @RangerTracelike sharing the fruits of our labor!
  24. I found out real quick that MPA uses a healthy dose of Loctite on grip screws.......guess it should be SOP........... Hope your "loose screws" didn't forfeit a match!
×
×
  • Create New...