12Bravo

Thanks for the feedback. I didn't realize the pros were that much taller.

I have the American Defense Recon-H scope mount for my Razor 1-6 and use a Tacmod stock with cheek riser for a more upright shooting position. Has anybody tried mounting offset irons with a small riser to accommodate a similar setup, or am I resigned to just adjusting magnification?

That's pretty much the setup I have and I haven't had any issues with it... Granted pretty low mileage, only about 5000 rounds or so, but zero hiccups

What pistol mag pouches are you using?

FYI to anyone with an A5... Take apart the recoil spring tube, clean it out and treat the spring, plunger, and tube with a dry lube. I know that maybe to some this is common sense, but I have never had to do this to any other shotgun I have owned. The end result is an A5 that reliably fires 1145 AA's and 7/8 slugs.

To be honest you're better off shipping ammo to the range of you have enough time.

My experiences have mirrored JAFO's. Only time the hair raised on the back of my neck was at Minneapolis/St Paul the TSA guy doing the inspection was insistent that I give him my key so that he could so his inspection in any area I wasnt allowed in. I was still able to see him but far enough away I couldn't see what his hands were doing, that was a little upsetting.

It worked fine on my qc10 side charger with last round bolt hold open

Phase 5 EBRv2-SC is made for side chargers

TSA locks are able to be opened by just about anybody, they are not appropriate for firearms. The only key that should be able to open locks for firearms should be the one in the owners possession.

That's to bad, i heard it was a very well done match.

Inertia spring, not recoil.

https://sill.armymwr.com/programs/multi-gun

For a magnifier probably the right size. http://shop.scopecoat.com/EOTech-G33-Magnifier-Vortex-MVT-3T-12HE38.htm

The thing is when you buy the 3g edition you are paying for the name. ~$2300 you get an opened loading port, extended charging handle, extended bolt release, and a Hi Viz sight. You still have to add a mag extension. Buyiing an M2 and having RCI work on it you can get pretty much everything he offers (look at his M2 pdf order form, it's pretty extensive) for ~$2400. Plus the port is done by the same guy that does the factory custom guns...

I have United Health Care Medica, just told the hearing aid place I went to that I have hearing aid coverage. The initial hearing exam and fitting were covered as well.

They actually have hearing aid electronics, hearing professional should run then as such.

My health insurance paid for these as hearing aids. https://www.soundgearhearing.com/collections/custom-fit/products/custom-product

The thing is, with PSA if they bring something new to SHOT it will be a year or more before they release it to the public.

If it can shoot 1145 in warm to cold weather I wouldn't mess with what works.

It's a stacking issue, if the lower is on the outside edges of the milspec the chances of the parts not working together is greater. Hiperfire is covering the difference by saying that parts that don't work 100% of the time together are not compatible.

The Taccom buffer was designed to minimize movement of the bolt, so locking the bolt to the rear is gong to be difficult at best. The thread about the 3rd stage buffer has some discussion on this. You could purchase the Gibbz latching charging handle and it would work considering the uppers are made by Gibbz, but you are going to find that due to the latching mechanism the surface area is going to be the same as the QC10. That is one nice-looking build, congratulations and well done.

They have a package for the Affinity, contact them about it.

I don't think he is talking about using it as a functioning gas block. Mount it as far forward on the barrel as you can to both mate the sight to the barrel and increase sight radius.

24c works with talon in qc10 lower