Jump to content
Brian Enos's Forums... Maku mozo!

BlaineD

Members
  • Posts

    22
  • Joined

  • Last visited

Profile Information

  • Real Name
    Blaine Donders

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

BlaineD's Achievements

Looks for Range

Looks for Range (1/11)

  1. The fire control system in these 2 pistols are identical. Neither have the auto safety the rest of the K100’s have. The difference is in the top end. Adjustable sights, longer slide and barrel, multiple recoil spring options. I own an X-Trim, and have tore down an X-Cal. The safety and sear assembly are interchangeable. Sent from my iPhone using Tapatalk Pro
  2. Not Bayou, but I shoot a 135gr coated SNS over 3.7gr of Bullseye. Get 960fps with my 3.8" barrel. Sent from my iPhone using Tapatalk
  3. My Grand Power shoots fast. I'm getting 850fps with 2.8 grains at 1.150 with a 147 Blue Bullet. I just went to 1.140 to see if I can't gain just a little. Sent from my iPhone using Tapatalk
  4. I picked up 11 power factor going to Blue Bullets from JHP. Had to back it way down! 3.2 grains was giving me about 860 avg with the blue bullets. My normal production load is 3.4 of Unique under a 147 JHP. It was about 860. I only switched to the Blue Bullets 147 RN, and it jumped to about 980. My favorite do all load of 5.3 gr of 800x under a 147? It would be too much for lead. I don't need that PF with what I do now anyway. Sent from my iPhone using Tapatalk
  5. 3N37 or 350. 340 will work, as will 3N38. Sent from my iPhone using Tapatalk
  6. I've been using 4.8gr of Bullseye. Super accurate and awesome! Gun doesn't care if it's Golden Sabres or Nosler! Sent from my iPhone using Tapatalk
  7. 800x doesn't care for light loads in my experience. Put those 5.2gr behind a 147gr jhp in 9mm, you will be pleased with how clean it burns. Don't use it for bunny farts! Sent from my iPhone using Tapatalk
  8. For Major, you might also consider 3N37 and 3N38. Depends on your bullet and comp. 3N37 and 350 are basically the same, other than cut. From what I know,they are the same formula, 3N37 is just finer for rim fire applications.Sent from my iPhone using Tapatalk
  9. Anything that will help you train your brain which eye you are looking through will work, if combined with practice. Lightly quinting non dominant eye, a piece of scotch tape over the lens. I've even seen someone put a dot on the off lens with a marker. After a bit, you brain will adjust and will know. Sent from my iPhone using Tapatalk
  10. Exactly!Sent from my iPhone using Tapatalk
  11. Glocke are fine if you have band aids. Sent from my iPhone using Tapatalk
  12. I have zero use for a single stage press loading .40 on a 1050. If I was loading rifle or something maybe. I guess I am speaking from a reloader angle vs a shooter angle. If making your own ammo is a hobby as well, you will need a single stage. If your only reason to reload is to supply ammo to shoot in high volume, then you are a shooter and probably would not require a single stage. I do know from experience however, load development is much easier and less time consuming if you run a few through the single stage before you mess with your settings on the big machine. If you are never going to touch it again after you find your load, then not so much. Sent from my iPhone using Tapatalk
  13. The usefulness of a single stage or a turret press will always be there. No reloading room is complete without it. Whether you use it to learn may be a personal thing, and does not diminish its usefulness even as you gain experience. Sent from my iPhone using Tapatalk
  14. Thanks! Keep us up to date. Liking the way this powder is looking for major loads.Sent from my iPhone using Tapatalk
  15. Updates? Sent from my iPhone using Tapatalk
×
×
  • Create New...