Jump to content
Brian Enos's Forums... Maku mozo!

424D57

Classified
  • Posts

    83
  • Joined

  • Last visited

Everything posted by 424D57

  1. I don't disagree that we have lots to observe besides blindly staring at the gun, nor that it can be easy to tell when a shooter obviously misses a target. None of that however is relevant to the paper target scoring procedure Sent from my iPhone using Tapatalk
  2. I don't recall anything in the rule book which provides guidance on RO's determination of what a shooter was doing during the run for scoring. Targets are scored at the target. Sent from my iPhone using Tapatalk
  3. Some additional details (and one correction) 1st sat - johnson county jcssa.com for directions/detail. right at 1 hr travel time from DFW airport. 2nd sat - ETTS near maypearl dallaspistol.com 1hr 20 min travel time from DFW 3rd sat - Waco www.ctrp-ipsc.org 2 hrs from DFW 3rd sunday - cresson ctuspsa.com 1 hr from dfw Sent from my iPhone using Tapatalk
  4. 5.6 gr N320 zero JHP SRP @1.165 for my 6" AET barrel runs 171 pretty consistently -424D57
  5. This post may be the only redeeming quality this thread could possibly offer. Bravo! Sent from my iPhone using Tapatalk
  6. Depends on the stage at PASA. Have shot in that darkhouse with low light - enough to see where to go but targets are washed out in the background and fibre is barely visible, have also shot stages there which are pitch black and start position includes a flashlight tethered to your wrist- easy to make out targets and your path with the flashlight, but the only feedback you get from sights is the negative image when sights return against a backdrop of muzzle flash.
  7. In addition to the disconnecter (middle) leg of the leaf spring and gummed up trigger bow channel mentioned above, check the shape of the bow and make sure it's not catching on mags (or some mags) when inserted. Could have a bow out of shape or some fat mags (or both). Super easy to miss. -424D57
  8. Sti trigger shoe will be pretty sloppy in the channel cut for the larger SV. Would annoy me but don't see any reason to suspect functional problems.
  9. After ~45 days using the CoC #1 as specified by the CoC book, I'm not sure I can quantify the difference in the way the gun shoots as far as combating recoil. There may be some difference, or it may just take a lower % of strength to maintain the same behavior on the pistol, resulting in less tension. That said, there's no doubt my ability hold the sights steady through a less than perfect trigger pull has been pretty significantly improved. -424D57
  10. Should also be noted if you're scared of the aggressive or tried a friend's and found it a little too sharp, PT will bead blast an aggressive texture just enough to take the edge off. Perfect balance for my wife and daughter who didn't like the idea of bleeding all over their new grips. -424D57
  11. We have standard aluminum on the Mrs' open blaster and aggressive on my limited. When she first saw the aggressive she said it was way to much and she only wanted standard texture, but I think in retrospect she might have gone for aggressive after-all. While the standard is nice, I'm not sure its a huge improvement over skate tape and its no where near as locked in your grip as the aggressive. You can also go for a middle of the road option; PT will be happy to bead-blast an aggressive grip to take the edge off a bit; this is what the Mrs' next open build will get. Its still very grippy, but not quite as likely to rip your hand open if you have to adjust your grip on a bad draw/table start. -424D57
  12. Wife and I both ran USPcs for a while, and she ran a P30LS for a bit. Never any issues -425D57
  13. Results varied by mag of course. Some wouldn't drop free before tuning. 2 or 3 tubes I got an extra round after tuning - some capacity due to tube reshaping, some due to fixing drastically out of spec feed lips (too close together). Some tubes just had feed reliability issues that I cleaned up (mostly due to feed lip problems). After the first 10 mags or so I couldn't tell you what problems I fixed, because I just started tuning the mags as soon as they showed up before even trying to use them. Besides my personal mags, I've had a couple friends who were ready to take a dremel to their feed ramp on 2011s that "won't feed _____ bullet profile" or "always nose dive short rounds" whose issues were instantly fixed by adjusting the feed lips to the specs in the dawson video. I'm certainly not disagreeing with anyone here who says they can do the same work with cheaper tools, but these tools work very well and combined with the video to get dimensions straight from a pro I don't have any complaints with the value. -424D57
  14. Edge + HC + Fiber front = Executive Anecdotally, the few Executives I've touched were tighter and cleaner fit than the few Edges I've touched. Have absolutely no way to know if they actually give more attention to the Executives or if it was just luck of the draw. -424D57
  15. I found the kit to be worthwhile. Between the tools, post to hold the tube in a vice, and specs (from the DVD) I'm not upset in the slightest with the value. I've done going on 20 mags so far- if only doing a couple it might seem less worth it. -424D57
  16. Grams in STI tubes. Bolen/TT in old style SVI tubes
  17. On plastic grips I modify the grip. On metal frames I modify the trigger. It's more work to modify the grip, and there's not a lot of space to work with, but it seems easier to get a smoother fit for me. Never don't the bow/shoe swap so can't compare. -424D57
  18. Sti VIP is the only thing that comes to mind with shortened grip. I think it's a single sided safety stock, but that sounds lots easier to replace than doing custom grip work. -424D57
  19. Another vote to look into a Beretta (391, 3901 etc). Can be found well under 1k, and great trap guns. I think munchkin's SCTP team must have 15 of the things running around, some of them having been through several shooters (as they grew) over a decade. -424D57
  20. We've run several different buttons including the STI. Never had any binding or wear issues. Current personal favorite for myself and the wife and daughter is the EGW mini paddle. Good distance to get out towards your thumb, but slim enough to minimize any issues with weak hand grip. Last I looked they were a downright steal at ~$5 on EGW's site. The mini paddle does however need some fitting - on all our 2011s stock it would hit the grip before dropping the mag; juts needs a nice ramp sliding away from the grip and away from the mag catch. Maybe 10 minutes with a sanding drum for the first one, 3 minutes for every one I've done since. Friend has I think a Wilson that's checkered and looks nice, but I've never seen it for sale without the mag catch as well so I've never looked much further into it. -424D57
  21. If the trigger has a pre-travel adjustment tab check that as well. -424D57
  22. Zero 125 JHPs can probably be found right at/near your 10c/rd threshold. I've found their 165 .40 JHP to be nearly identical to MG 165 JHP in performance; haven't gotten my hands on any 9s yet to play with but would expect similar quality. -424D57
  23. One more vote in case you don't yet have sufficient confidence in the replies here- Tune the tube per the Dawson video, and get Grams 11 coil 9mm guts. We use the STI tubes/hardy spacers/grams guts for 9 minor and 9 major 2011s up to 23-24 rounds in the mag with no problems. -424D57
  24. Is that the aggressive texture on the PT grip? Looks very nice. -424D57
×
×
  • Create New...