SHARPPOINT

I have (for sale) 20 new/old stock mags for the Para 18-9 Limited. Marked Canada on the mag body. Never used. Just like these: https://www.midwayusa.com/product/564663/para-ordnance-magazine-para-ordnance-p18-hi-cap-hi-cap-limited-nite-tac-tac-five-9mm-luger-18-round-steel-nickel-plated

Left to right is the I have... It worked but someone that knows more might say i did it wrong??

115gr MG over 4.3gr TiteGroup for both and also IDPA

And as I have said before they will also work in the new PC9, if your not shooting IDPA I have a 18.9 Limited that I shoot USPSA, (I have 20 Canada made mags) Also I have the newer Pro Custom 9 and all 20 mags WILL run with the DP extensions. If shooting IDPA the mag needs to be almost level at the bottom of the mag well. this can happen with the OEM mag that comes with the PC9 and http://www.dawsonprecision.com/ProductDetail.jsp?LISTID=80000064-1388517802 Please, I have been looking/working on this for around eight months... You can file some of the after market mags that may or maynot run. hope this helps some of you that are having the PC9 mag issue.

Not sure who you talked with at Dawson...?? But, here is what you need http://www.dawsonprecision.com/ProductDetail.jsp?LISTID=8000005F-1388517801

Garrett Info.... +1

CyclicRate, I know if late, but very good info in your post, Thanks

I think there will be a TT model, But it's going to have Remington on the side??

Build4u sorry, your correct. I've never had any with the Factory Ext. Until now. Nice but won't fit shooting IDPA

With a bit of fitting the GC trigger is very sweet in the Pro Custom 9mm

One of the best looking 40's I've seen. Is it a Limited?

Bought the GunCraft trigger... A LOT of fitting. But worth it. Very nice trigger. Thanks for the help

The RN 147gr Extreme over 3.6gr of TiteGroup 5" barrel runs 130-132 PF OAL=1.150 Should be good for all steel unless not set correct...

Telecast, tell me a little more about the fitting?

Anyone tried installing a Flat Face Trigger in a new 9mm Pro Custom? If so what brand and how much gun smithing? Links to the trigger please... Thank you, TT

115gr. MG RN / 4.3gr TG = 129-131 PF OAL = 1.145 147gr. X-T RN / 3.2gr. TG = 130-132 PF OAL = 1.150 For IDPA I really don't even have to re-site the gun... The 147's are very soft shooting

I have never seen a Canadian made Para Magazine in 9mm that holds more than 18... Stock Mag that is I just bought some new/old Canadian nickle mags in 9mm for $25

I have "Prime" 2 day shipping :-)

http://bmb.goemerchant.com/cart/cart.aspx?ST=buy&Action=add&Merchant=sprincousa1&ItemNumber=35810 With http://www.amazon.com/Govt-1Pc-Guide-Rod-Plug/dp/B003IZGJV8/ref=sr_1_1?s=sporting-goods&ie=UTF8&qid=1424979640&sr=1-1&keywords=wilson+combat+1911+guide+rod You won't beleave the diffrence it makes in the Pro Custom 9

Anyone tried the Dawson +.100 base with the Mec-Gar mags? What im hearing is that they will fit the mag well and also fit the IDPA box...??? http://www.dawsonprecision.com/ProductDetail.jsp?LISTID=80000064-1388517802 I have ordered some to try.

Thanks to all... Dirty Rod, That's what i was looking for, Thanks for the info

For three to four years now i have been shooting 115gr Montana Gold FMJ over 4.3gr of TiteGroup. I just bought 4000 of the X-tream 115gr CMJ. My question, will there be powder change need? The only difference in the bullets is no exposed lead on the back. Thanks in advance, T

The Mags form Joes WILL NOT fit the Pro Custom 9mm. With a little sanding/carving on the base pad they will go into the mag well. Just my .02

I bought the Pro Custom 18.9, also have a four year old 18.9 Limited. I have 12 mags with the Limited with the Dawson Ext on them. I also have a STI Dawson CRP 9mm Eagle with 8 of the reg base pads 126mm mags. I only have a few hundred rounds thru the new PC9 but I have run all the above mags with it with zero problems without changing anything. The only thing i have done to the PC9 is a trigger job and changed to a Springco 10lb recoil spring. am also going to order a more substantial guide rod.

125gr Valiant over 3.9gr TiteGroup Win Brass out of my STI Eagle and my Para 18.9 Limited or 115gr MG over 4.4gr of TiteGroup Both of these loads I have used for years. But I think I would try the load you have been shooting.