Jump to content
Brian Enos's Forums... Maku mozo!

BullyDog

Classified
  • Posts

    141
  • Joined

  • Last visited

Posts posted by BullyDog

  1. You need to seat them shorter. The noslers have a steep long ogive compared to VLD's but aren't as bad an SMK's. You can't go by magazine length or the standard 2.260" OAL when loading these. It will vary to your chamber throat. You may have to set them back considerably more. I know the Nosler book uses the same OAL for the 69gr, 77gr, and 80gr. But not every AR has a 5.56nato cut chamber throat. There are alot that use a 5.56 wylde, and some other hybrids, then just stamp 5.56 or .223 on the barrel and gun.

    You need to make a home made OAL case guage with a spend case from the rifle and a cleaning rod part. Using the Nosler bullet and some lube, pushing it into the chamber so the bullet hits the throat and gets pushed into the case. When you pull the case out, measure the COAL without pushing the bullet in further. Subract .010" from that number and this is where you start. Do a small test batch to test for reliable feeding. You can work in .002" increments in or out for accuracy. Depending on case variation you may even need to seat slightly deeper so try working shorter before you work longer.

    Seems the ammo crisis has been causing some experimentation with unexpected components. I've seen guys running 80gr SMK's thru AR's with 1 in 9 twists just fine, so don't get to frustated. Work with what you have and make it work for you. The biggest downside seems to be how much the large bullet takes up case capacity, and risk of compressed loads.

    I just picked up 300 Nosler 77 grain 223 bullets, I have a Wylde 223 24" barrel on my AR.

    I was hoping to shoot 600 yards, do you have any advice on this?

  2. I check PV twice a day morning and evening and they never have primers.

    Here lately PV has been posting on their Facebook page before they put the primers up for sale on the site. Lurking there might be a better use of your time. Facebook is stupid though and won't give you an email alert with new posts on their page.

    If you do happen to see a post from them related to in stock primers, let us know. :)

    Thanks, I will check the Facebook page also.

  3. I have run across brass that has the primer staked, when the decapper hits it its obvious that if I try to push it something will break. I cannot tell from the pix if your brass has staked primers, but I hope you don't have much of this brass, it may not be worth trying to reload if the primers are set in such a way that trying to decap them breaks stuff on your loader.

    jj

    No, after this happened, I went through all my brass. I guess my kids picked up somebody else's brass at the range last month, and these 10 or so slipped through my inspection.

  4. http://www.capitol.h...ills/SB219_.htm

    SECTION 1. Chapter 134, Hawaii Revised Statutes, is amended by adding a new part to be appropriately designated and to read as follows:

    "PART . ASSAULT WEAPONS

    §134-A Definitions. As used in this part:

    "Assault weapon", excluding any firearm modified to render it permanently inoperable, means:

    (1) Any selective-fire firearm capable of fully automatic, semiautomatic, or burst fire at the option of the user or any of the following specified semiautomatic firearms: Algimec Agmi; Armalite AR-180; Australian Automatic Arms SAP Pistol; Auto-Ordnance Thompson type; Avtomat Kalashnikov AK-47 type; Barrett Light-Fifty model 82A1; Beretta AR-70; Bushmaster Auto Rifle and Auto Pistol; Calico models M-900, M-950, and 100‑P; Chartered Industries of Singapore SR-88; Colt AR-15 and Sporter; Daewoo K-1, K-2, Max-1, and Max-2; Encom MK-IV, MP-9, and MP-45; Fabrique Nationale FN/FAL, FN/LAR, or FN/FNC; FAMAS MAS 223; Feather AT-9 and Mini-AT; Federal XC-900 and XC-450; Franchi SPAS‑12 and LAW-12; Galil AR and ARM; Goncz High-Tech Carbine and High-Tech Long Pistol; Heckler & Koch HK‑91, HK-93, HK-94, and SP-89; Holmes MP-83; MAC-10, MAC-11, and MAC-11 Carbine type; Intratec TEC-9 and Scorpion; Iver Johnson Enforcer model 3000; Ruger Mini-14/5F folding stock model only; Scarab Skorpion; SIG 57 AMT and 500 series; Spectre Auto Carbine and Auto Pistol; Springfield Armory BM59, SAR-48, and G-3; Sterling MK-6 and MK-7; Steyr AUG; Street Sweeper and Striker 12 revolving cylinder shotguns; USAS-12; UZI Carbine, Mini-Carbine, and Pistol; Weaver Arms Nighthawk; Wilkinson "Linda" Pistol;

    (2) A part or combination of parts designed or intended to convert a firearm into an assault weapon, as defined in paragraph (1) of this definition, or any combination of parts from which an assault weapon, as defined in paragraph (1) of this definition, may be rapidly assembled if those parts are in the possession or under the control of the same person;

    (3) Any semiautomatic firearm not listed in paragraph (1) of this definition that meets the following criteria:

    (A) A semiautomatic rifle that has an ability to accept a detachable magazine and has at least two of the following:

    (i) A folding or telescoping stock;

    (ii) A pistol grip that protrudes conspicuously beneath the action of the weapon;

    (iii) A bayonet mount;

    (iv) A flash suppressor or threaded barrel designed to accommodate a flash suppressor; and

    (v) A grenade launcher; or

    A semiautomatic pistol that has an ability to accept a detachable magazine and has at least two of the following:

    (i) An ammunition magazine that attaches to the pistol outside of the pistol grip;

    (ii) A threaded barrel capable of accepting a barrel extender, flash suppressor, forward handgrip, or silencer;

    (iii) A shroud that is attached to, or partially or completely encircles, the barrel and that permits the shooter to hold the firearm with the nontrigger hand without being burned;

    (iv) A manufactured weight of fifty ounces or more when the pistol is unloaded; and

    (v) A semiautomatic version of an automatic firearm; or

    © A semiautomatic shotgun that has at least two of the following:

    (i) A folding or telescoping stock;

    (ii) A pistol grip that protrudes conspicuously beneath the action of the weapon;

    (iii) A fixed magazine capacity in excess of five rounds; and

    (iv) An ability to accept a detachable magazine; or

    (4) A part or combination of parts designed or intended to convert a firearm into an assault weapon, as defined in paragraph (3) of this definition, or any combination of parts from which an assault weapon, as defined in paragraph (3) of this definition, may be rapidly assembled if those parts are in the possession or under the control of the same person.

    "Machine gun" shall apply to and include a weapon of any description, loaded or unloaded, which shoots, is designed to shoot, or can be readily restored to shoot automatically more than one projectile, without manual reloading, by a single function of the trigger, and shall also include any part or combination of parts designed for use in converting a weapon into a machine gun and any combination of parts from which a machine gun can be assembled if such parts are in the possession of or under the control of a person.

    "Projectile" means any size bullet that when affixed to any cartridge case may be propelled through the bore of a machine gun.

    §134-B Sale or transfer of assault weapon prohibited. (a) Any person who, within this State, distributes, transports, or imports into the State, keeps for sale, or offers or exposes for sale, or who gives any assault weapon, shall be guilty of a class B felony.

    This section shall not apply to the sale of assault weapons to the department of public safety, police departments, state department of defense, or to the armed services of the United States in connection with the discharge of official duties.

    §134-C Possession of assault weapon prohibited. (a) Any person who, within this State, possesses any assault weapon, shall be guilty of a class C felony.

    This section shall not apply to the sale of assault weapons to the department of public safety, police departments, state department of defense, or to the armed services of the United States in connection with the discharge of official duties.

    §134-D Relinquishment of assault weapon to law enforcement. Any individual may arrange in advance to relinquish an assault weapon to a county police department or the department of public safety for disposal, without penalty.

    §134-E Machine guns. (a) Any person who:

    (1) Possesses, sells, or transfers a machine gun; or

    (2) Use a machine gun in the perpetration or attempted perpetration of or an attempt to commit murder, manslaughter, kidnapping, sexual assault, assault in the first or second degree, robbery, burglary, or theft,

    shall be guilty of a class A felony.

    ( The presence of a machine gun in any room, boat, or vehicle shall be presumptive evidence of the possession or use of the machine gun by each person occupying such room, boat, or vehicle."

    SECTION 2. Section 706-662, Hawaii Revised Statutes, is amended to read as follows:

    "§706-662 Criteria for extended terms of imprisonment. A defendant who has been convicted of a felony may be subject to an extended term of imprisonment under section 706-661 if it is proven beyond a reasonable doubt that an extended term of imprisonment is necessary for the protection of the public and that the convicted defendant satisfies one or more of the following criteria:

    (1) The defendant is a persistent offender in that the defendant has previously been convicted of two or more felonies committed at different times when the defendant was eighteen years of age or older;

    (2) The defendant is a professional criminal in that:

    (a) The circumstances of the crime show that the defendant has knowingly engaged in criminal activity as a major source of livelihood; or

    The defendant has substantial income or resources not explained to be derived from a source other than criminal activity;

    (3) The defendant is a dangerous person in that the defendant has been subjected to a psychiatric or psychological evaluation that documents a significant history of dangerousness to others resulting in criminally violent conduct, and this history makes the defendant a serious danger to others. Nothing in this section precludes the introduction of victim-related data to establish dangerousness in accord with the Hawaii rules of evidence;

    (4) The defendant is a multiple offender in that:

    (a) The defendant is being sentenced for two or more felonies or is already under sentence of imprisonment for any felony; or

    The maximum terms of imprisonment authorized for each of the defendant's crimes, if made to run consecutively, would equal or exceed in length the maximum of the extended term imposed or would equal or exceed forty years if the extended term imposed is for a class A felony;

    (5) The defendant is an offender against the elderly, handicapped, or a minor eight years of age or younger in that:

    (a) The defendant attempts or commits any of the following crimes: murder, manslaughter, a sexual offense that constitutes a felony under chapter 707, robbery, felonious assault, burglary, or kidnapping; and

    The defendant, in the course of committing or attempting to commit the crime, inflicts serious or substantial bodily injury upon a person who has the status of being:

    (i) Sixty years of age or older;

    (ii) Blind, a paraplegic, or a quadriplegic; or

    (iii) Eight years of age or younger; and

    the person's status is known or reasonably should be known to the defendant; [or]

    (6) The defendant is a hate crime offender in that:

    (a) The defendant is convicted of a crime under chapter 707, 708, or 711; and

    The defendant intentionally selected a victim or, in the case of a property crime, the property that was the object of a crime, because of hostility toward the actual or perceived race, religion, disability, ethnicity, national origin, gender identity or expression, or sexual orientation of any person. For purposes of this subsection, "gender identity or expression" includes a person's actual or perceived gender, as well as a person's gender identity, gender-related self-image, gender-related appearance, or gender-related expression, regardless of whether that gender identity, gender-related self-image, gender-related appearance, or gender-related expression is different from that traditionally associated with the person's sex at birth[.]; or

    (7) The defendant uses an assault weapon or a machine gun, as those terms are defined in section 134-A, in the course of committing murder in the first or second degree, manslaughter, kidnapping, sexual assault, assault in the first or second degree, robbery, burglary, or theft."

    SECTION 3. This Act does not affect rights and duties that matured, penalties that were incurred, and proceedings that were begun before its effective date.

    SECTION 4. In codifying the new sections added by section 1 of this Act, the revisor of statutes shall substitute appropriate section numbers for the letters used in designating the new sections in this Act.

    SECTION 5. Statutory material to be repealed is bracketed and stricken. New statutory material is underscored.

    SECTION 6. This Act shall take effect upon its approval.

    INTRODUCED BY:

    _____________________________

×
×
  • Create New...