Jump to content
Brian Enos's Forums... Maku mozo!

Stephen7942

Classified
  • Posts

    177
  • Joined

  • Last visited

Everything posted by Stephen7942

  1. Good stuff!! I’ve got PCC, Prod or CO options in the safe. Probably will start with PCC and see what happens! Thanks again!
  2. Great info - thanks! I’ll give them a look!
  3. That is a good plan. Didn’t cross my mind yet. Main goal will be to just finish the match, have fun and not DQ!
  4. great info! Thanks for that! Might need to watch a rule refresher course on YouTube lol
  5. Bumping this to see if any new options are out there. Thanks!
  6. I shot at least once a month for about 6 years. Had a couple kids and took a break from shooting. It’s been about 3 years since I’ve shot a match. I am now looking to get back into USPSA and shoot a few matches this spring/ summer. I will be starting with local matches. any tips/tricks or good advice on making a smooth comeback tour?! I assume dry fire is going to be my starting point. thanks in advance.
  7. MBT is an excellent trigger. I believe LaRue is now selling some products through dealers. May want to check that out if you don’t want to worry about a wait time.
  8. Awesome. I'll check them out. Thanks for the info!!
  9. I have shot RN with great success. From what I have heard they seem to work best. That being said I have never used TC's or HP's - happy shooting!
  10. Looking for feedback on an IWB holster for my CZ P-01 compact. I have a set of LOK grips on the way for it. Looking for CC options - probably around the 4-5 o'clock position. Thanks in advance!
  11. Cajun gunworks did great work on my slide milling for DPP.
  12. Online Forum Classified Section / FB Club Pages / Local Matches / Word of mouth have all worked good for me.
  13. I usually put my cleaned cases into a ziplock and spray with Hornady One-Shot. I Shake the bag around a good bit and then dump into the case feeder.
  14. I run 3 pouches. Feels like overkill most of the time. I think 2 would be plenty.
  15. I thought about going thru the build process when I bought my GMR-15 but decide the model from Ben Stoeger Pro Shop had all that i wanted on it. I got the 14.5" P&W and love it. YMMV but that option had everything i "needed" in a PCC. I am fine with the existing hand guard on mine. Fits my hand perfectly. Happy Shooting!
  16. JP is solid for me. I have no other to compare it too though. I love my GMR-15 w/ 14.5" P&W brake.
  17. Ahh. makes sense... still too close for comfort IMO.
  18. CR speed Mag pouches for me. They give you the ability to use with many types of mags with a quick change of the plastic insert. They are good to go IMO
  19. Don't think I would be standing there. Not sure how the stage was setup, but why not stand behind the shooter?
  20. I have been using about 3 oz with a 3/4 full Frankfort Arsenal tumbler and fill it up with water just above the top of the brass. I ran a few batches with a 30 min "pre-wash" with just plain water and would dump it/rinse it and refill w/ water plus brass juice and run for an hour or so. That worked good. I recently switched to just running water/brass juice mix from the start for 1.5-2 hours and it comes out just as clean to me.
  21. Mecgar 17 rounders for production and I use Taran Tactical base pads for CO. - Also look into the grams spring/follower kit if using for CO.
  22. I am running the Hogue stock that came with it. I may switch eventually but it worked for me just fine out of the box. Thought about switching to the minimalist. We'll see what happens.
  23. Glad to hear you got it straightened out!! Happy Reloading! Take Care! -SS
  24. Awesome! Best of luck. I had to play with the ratios and tumble time just a bit before I got it just right. Makes life much easier for me. Best of luck!
×
×
  • Create New...