RonPogi
-
Posts
45 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by RonPogi
-
-
On 4/1/2017 at 3:12 PM, Bamboo said:
Is that Schuemann an AET barrel?
Yes 24 twist
-
On 3/8/2017 at 0:40 PM, Sandbagger123 said:
So i emailed them about getting a sample of the 124gr to try in my open gun. Seeing that i have been using BBI in it and have no issues, i was surprised to get the answer " due to liability we can not reccomend them in a open gun" from them. don't know what liabilty would be involved.
anyone use the 124 in their open gun?
My open gun didn't like it, schuemann barrel 9mm major, no matter I've tried shoots everywhere. My open gun likes acme bullet shoots accurate.
-
I have both IPSC Alex cmore mount and thumb rest and they used hex 6-40 screws.
thanks;Ron
-
Try racking the gun without the installed extractor. Thanks:Ron
-
bump fire? possible
-
Take out the upper receiver. Insert an empty magazine and wiggle it up and down (observe the movement with and without pushing the release magazine). If the magazine is too loose, that will create problems with feeding ammo because the magazine is too low (eventually resulting in a nose dive). This usually occurs when using a plastic grip 2011. Thanks!
-
I sliced my finger 2x during resizing 40 cal case
-
RonPogi, where in DT do you live? I live in the Silver Lake area.
I can only help you all 1911 and 2011 pistol.. I live in Adams blvd. Every 3rd Saturday of the month I compete Zev fun shoot @ Piru. If you want to meet me just let me know.
-
I can help, I live in Los Angeles dowtown, I build my own 6 sti 2011 already 9mm & 40. pm me
-
Try it again without using the spring that hold the amby safety and slide stop. It might be your spring that pushes the slide stop is a little bit strong..
-
Glad you made it.. Happy shoot!!
-
Try lower your OAL starting to 1.130" and up.
-
-
Loading here BE 3.3 with OAL 1.190, spring rate 9lbs
-
If you have a squib bullet to your barrel BANG! Backup gun is the best..
-
Bullseye
-
The biggest downside 550 vs 650 is the case feeder. But if you really wanted a casefeeder for the 550 you can get one, it will only do pistol cases though.
Sent from my SPH-L710 using Tapatalk
With a little mods of casefeeder, I have 550b with Mr bullet feeder and dillon casefeeder I can loads 5 calibers 9mm,40,45,7.62x39 & .308 with no problem, 100 rnds/5 mins.
-
I have 550b as well with casefeeder and mr bulletfeeder awsome! 100 rnds feels like 5-10 mintes
-
The powder rod should be installed and check the primer seating cup didn't hit the shell plate while rotating.
CKarms open - FT Eject
in Open Pistols
Posted
I have the same problem hard to explain but I figure it out is to change a new long ejector and the problem goes away. (hence my old ejector has no damage).