i put all new parts : plunger + spring, firepin+spring+cups and tested with 10 dry fires ,,,,,, no scratch ! I will keep as is and follow-up every 100 rounds.
Thanks !!
Q2
Hi all,
Glock G22 G4, no mods - all original parts. After the first 300 rounds, during the cleaning process, i found this marks on the safety plunger :
Never see this before in a brand new glock ... Any advise ? Could be a damage from dry firing pratice ?
Thanks in advance,
Q2
Larry,
I had a lot of problens with the feed process of the new cartridge. Always jam.
So, the root cause was the short lenght of the wildcat that puts the front of the ramp feeding down.
I provide a auxiliary spring to keep the front part of the ramp always up. End of the problens.
Bellow a photo from a prototype :
The final spring was made with wire with 1 mm tickness.
Greetings from Brazil,
Químico2
As soon as possible, i will test the performance with 240 grains bullets. I think this is a perfect package for our Wild Boars.
Checkering in a near future ,,, i need that special tools.
The finished of the stock its only bee wax and a lot of polishing work.
Greetings from Brazil,
Químico2
This is my last toy :
A Mauser 96 action, with new barrel and using a wildcat caliber - a 308 case trimmed down to 40 mm and using a 200 grains 44 magnum bullet.
On the left side the wildcat, on the right a 44 Mag for size compare.
Initial performance : 1900 FPS @ 200 grains FMJ bullet.
Greetings from Brazil,
Químico2