-
Posts
3,556 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Posts posted by jcc7x7
-
-
XTG Module
in Sig
2 non legion x-5s one with the tungsten module.
Both have grayguns trigger kits in them and SS guide rods.
On the timer I split and transition them the same.
But
the TXG grip is more forgiving if I get lazy with my grip and I like the "feel" of it better
FWIW
-
January and June
-
Not sure
Eyeballing it 3/16 and 1/take the grip with you to the welding supply
-
Holds tungsten rods you can get at the welding supply in your area or online
-
Shoot it till you lose it
-
As long as the recoil spring strips the round out of a full mag and locks the slide up you're good to go!
I've run some with 7 lbs springs but it needs to be run clean and well lubed. then it will run a 200 rounds before it gets sluggish.
So like you I usually run 9 lb springs because the gun runs and split times are the same as far as sight recovery etc.
Give a 7 a try and see what happens, I don't like going below 19lb MS, but that's me !
-
Any full size 320 slide w/o the sight plate can be milled however you want it
Sight in front of the RMR etc
-
Everyone who's for it should send 20 bucks to support benos and maybe the response would get louder instead of deafening, just a thought
-
Same idea but I used a heavier, thicker washer
-
Volquaterson website
Lots of 22 stuff, for rugers
Inc holsters
-
One set of bases with a dowel in base.
Dawson cause it doesn't slide on/ off.
Another set of bases for out of state matches.
-
Sig 320
Multiple grip options
Simplicity of same trigger pull on every shot
Striker fired pops all primers
Lots of stuff in add on market.
-
Buy them , especially if the price is right!
-
Not sure
I heard all the info on here and then I called SL and spoke to them.
SL told me not to use their brass in the TI cyl.
Also know two guys I shoot ICORE with that didn't believe me and bought SL .
New it seemed to function on the next reload after it had been fired it stuck in their cyl.
They had it up for sale at the next match I was at and then agreed it stuck in the cyl while Win, Speer and Blazer all worked fine
Take it for what it's worth!
-
Check your loads
I can run my to1.150 in 3 x5s
-
Ambitious safety
Mag release paddle if desired
Magwell, dawson ice or techwell grips and well system
-
XTG Module
in Sig
Yes it's legal
Most think it helps
Puts the wgt in the sweet spot of 40 to 45 ozs
-
I've got soft springs from both. Just chalk it up to stuff happens.
Usually don't need followers so buy tti mostly.
-
Save your money and get it built. Unless you have skills building 1911/2011's.
-
-
3 minutes ago, motosapiens said:
What has your testing shown to be the difference in your stage times using 140pf vs 132-ish (what most minor shooters load at)?
When I've used factory 9mm ammo of various brands, I haven't been able to detect any performance difference whatsoever compared to my reloads. Therefore I conclude it may be an imaginary advantage.
Concur that any perceived advantage is in the mind but not on the timer.
I use to run 142 of in a sig metal x5 all round, because the gun ran better that way.
No difference in HF than with 132pf. fwiw
-
53 minutes ago, B585 said:
I realize my last response was rather long so here’s the Cliff Notes. CO was the fastest growing division in the last couple years. Why did it need a rules change of such drastic proportions?
Gun manufacturers lobby!
Uspsa corporation wants the ad, sponsor money
-
No, replacement slide stop/takedown lever is
-
Jb weld
Dot moa 3 vs 6
in Gear & Accessories
Posted
The venom 3 moa dot is not very bright in the sun. the 6 moa is usable.
The Holosun 2 moa is bright enough that its visible in the sun and 32 circle dot is fun up close for hoser stages