-
Posts
369 -
Joined
-
Last visited
Content Type
Forums
Profiles
Events
Store
Everything posted by theycallmeingot
-
Both eyes open versus left eye squint
theycallmeingot replied to MRevolutionIX's topic in Tips for Improvement
i have been putting tape over my left eye since pretty early on in my shooting and have never gotten over needing it. i saw a pretty big improvement in transitions being able to have both eyes open instead of squinting my left eye. i guess you could say i'm addicted to it. -
Actually, make that 6, as of yesterday.
-
Popper calibration ammo: 124 gr or 147 gr?
theycallmeingot replied to 2MoreChains's topic in 9mm/38 Caliber
This makes sense to me. -
Another user of 13lb ismi springs here.
-
I have been through 5 safety pins in 5 years on my 550. Best solution i have found so far.
-
Old topic, but i find it interesting that this is one of the hottest debated topics on gun forums, yet when i was looking a few years ago, and again a few months ago, you still can't find very many straight answers. I shoot only hard cast lead bullets. I was faced with the reality that i was going to either have to shoot plated/jacketed bullets at a gssf match and use the factory barrel, or get to the bottom of whether or not you can shoot lead out of a factory barrel. I went out and shot 400 rounds out of 2 different 34s, 10 rounds at a time, each time disassembling and checking the barrels. My own experience was that factory barrels lead faster than my KKM barrels, or my xdm factory barrels, or my 1911 barrel. I also found that the lead came right out of one of the barrels, while i had to really scrub the other. There is potential truth to the kaboom stories, but it seems easy to avoid. And that is by cleaning your barrel every 300 rounds or so. I have since shot hundreds of rounds out of g26, g17, and g34 barrels. They never get scarily leaded, but i do get paranoid and check on them around the 200 round mark. Every glock is different. Be careful, and pay attention to the signs.
-
GoPro Hero 3+ Black on Tripod Settings?
theycallmeingot replied to BBQDawg's topic in Tips for Improvement
i don't know how much you know about this stuff, so don't be annoyed if i'm stating stuff you already know. the 1080p part is the resolution. if you're wanting the best possible picture, you want to use 1080. any lower number is simply a smaller sized video, so when it is blown up to play on a screen, it looks worse. the only reason he could be having better luck with a smaller resolution is because of other settings inherent in the resolution presets on those cameras, and not because he is using a smaller resolution. 30 fps is fine. some people record at 60fps (myself included) when wearing the cam, because stuff is moving so fast, the extra frames make the video look more fluid, in most cases, and less choppy. the reason it looks like you are far away, is because you are probably using a wide (fisheye) setting. try using a normal field of view, 1080p 30fps setting. if you post the names of your presets here, i can help you find one you will be happy with. (i don't own a gopro, so i don't know how they package their settings.) -
What kind of barrel are you using?
-
Winchester primer quality control
theycallmeingot replied to Truegent2004's topic in General Reloading
My experience reloading is not as deep as some here. I have reloaded probably only 30k winchester primers, but never a misfire. -
Clays shoots pretty soft, but pushing 170ish PF out of a 200gr bullet was in the upper limits of the powder. I switched to WSF for no other reason than it's what i had about 10lbs of already for 9mm minor. It's a bit smokey, but i have not found a lead load yet that is not. It is pretty soft as well. Practically speaking, i would take your manual to your favorite LGS that you plan to buy powder from, and see what they have a lot of on the shelves or what they are likely to have regularly, use your manual to confirm you can get major out of it, and try a couple powders that way. I have found there to be so little difference in loads i have worked up, it makes more sense for me to shoot a load that is easy to shop for as the number 1 priority.
-
i'm new to the 1911 thing, but i have about 900 rounds on a new kimber custom II with zero issues. I attribute it mostly to having shot absolutely 0 rounds through the factory mag. I use all Tripp Cobra mags. i almost had myself convinced, prior to purchasing, that kimbers were junk (from what i read on the internet.) the more i read, the more it sounded like the mags make up for somewhere around 90% of the reliability of a 1911. either people grossly over exagerate gun problems on the internet, or i've just been very, very lucky with all of my "junk" guns that i've bought.
-
I have 12k round through my xdm, and have never noticed a POI shift from being dirty or clean, certainly not to the tune of a couple inches. Mine "hits left" as others have said out of the box, clean, and after 5k rounds of lead without cleaning. it's really not a big deal to me. i adjusted the sights the first day i shot it and have not had to change it. it is a pretty accurate gun. they did. despite your extensive testing on only "several" of the guns.
-
my xdm 5.25 9mm has the front sight within .001 of center, and the rear sight is almost flush with the right side of the slide.
-
i have the 9mm version; not the 40. i've shot upward of 12k round through my gun, all cast. no leading or any other problems.
-
that's the funniest thing i've seen in a while. w. t. f.
-
i'm curious what your rounds chronoed at home, too. i've only shot 2 matches with chrono stages. My rounds measured 134PF at one, 136PF at another, and 135 at home.
-
No Shoots in Incorrect Location
theycallmeingot replied to theycallmeingot's topic in USPSA/IPSC Rules
it really comes down to this. i'll be doing this from now on, and i really think it should be a requirement across the board. -
Lead 147 FP, OAL 1.137, 3.6 gr WSF, 136PF out of XDM 5.25, 131 PF out of g17.
-
No Shoots in Incorrect Location
theycallmeingot replied to theycallmeingot's topic in USPSA/IPSC Rules
Brad, ever work a level 2 or 3? I have -- and trust me I've paid money out of my pocket to work every one of 'em. Anything I may have been "compensated" to be there, only paid for a fraction of my expenses. You're right on one point -- it's not up to competitors to perform as ROs at a level 2 or 3. On the other hand, that doesn't mean they get to check their integrity at the door either. They shot the score, they should be proud of it -- all of it. Anything less is unsportsmanlike conduct. it should be noted, that the "issue" with said shooter was NOT an issue of integrity. I can remember *almost* my exact hits on a stage, until i shoot the next one. It's a bi product of caring about getting better, and tracking my hits VS what i called them to be, coupled with the speed in which i shot them. There are plenty of people that shoot what they shoot, let the ROs do their job, and never think about that stage again. We're not all fanatics. When he was approached, 3 or 4 stages later, he probably had no idea how many no shoots he had shot so far, that day, and definitely not on which stages. Nor do I remember there being a requirement to do so in the rulebook. That should be taken care of, by the ROs, before the time that the score sheet is signed. EDIT: And I don't think guilting the shooter into fessing up to it, after the fact, and in front of his squad, is appropriate. -
kudos to them. i've been to club matches where it's like pulling teeth to call for a popper calibration. (i've never called for one, but have seen it done.) some things are not strictly necessary for club matches. But there are plenty of people who shoot only club matches for a year or more before going to their first major, and they don't spend time on benos reading rules threads. Those people deserve to see how the rules SHOULD be followed in club matches, so they're not surprised and dumbfounded when they get to a major match, and wonder wtf a reshoot is.
-
Can you stop yourself during a stage for an REF
theycallmeingot replied to theycallmeingot's topic in USPSA/IPSC Rules
same exact match and situation as me. i ULSC, and said "drop turner didn't get reset." the time was written down, and scoring of targets was about to commence, until the 3rd RO walked up and said "it did NOT activate". i got the feeling i was close to not getting a reshoot. i'm glad he was paying attention. Which would have pissed me off, since I had spent what felt like an eon watching the thing, waiting for it, before finishing the stage. -
No Shoots in Incorrect Location
theycallmeingot replied to theycallmeingot's topic in USPSA/IPSC Rules
seems to me there should be classes on "how to fill out a score sheet". That IS the second most important part of our game, after ensuring safety.