Joe139

I was told if you remove .005 from each side (outer) of the SVI bow it will fit IN the STI,It worked in my gun

Infinity makes slides with a interchangeable breech faces so you can go from a 45 to a 9 with out buying a whole new slide

I bought one about 1 month ago.After a lot of reading in this forum they supposedly did a up grade and it was suppose to work better than the first ones they came out with.So I bought one for 38 SC and after a little bit of fine tuneing it work great I would not be with out one.Just not haveing to take your hand off the handle is the best thing.I gained about 5 shells per minute or 18 per minuite total not double but it is way easyer not haveing to slide the shell in every time.I just click it around with my thumb put a bullet on and load much easyer.

Thanks need to do some measuring before I order one

Anybody know the height of a 550 with a case feeder and mounted on a strong mount

You will like it.The pistol brass resizes easyer makes things go much smoother.And yes use the one shot I won't reload pistol brass with out it again.I don't worry about getting some inside the brass it won't affect anything I also don't clean it off after loading

You can also from the bottom side heat the screws on the thread end with a soddering iron if you don't want to use a torch

I have popple holes from what I have read they are the answer for that type of barrel.Thanks for the reply Joe

Does anyone sell Quinn II mounts anymore if so where can I find one.

I like it, it draws clean no catches.I had a Ghost I liked the draw but I always fought the safety.The safety on the USA is very easy to use and secure.I also bought the optional paddle for the USA Holster that goes against your leg.The first thing I did was countersunk the two screws that go against your leg and I also like it and glad I purchased it when I bought the holster.The magnets are strong and hold the gun good with the safety off.The adjustments cover everything as far as the holster position I did Locktight all the screws.I have a match this weekend and will try and do a follow up.Just my 2 cents and I'm not an expert,Joe

1000 new ones are 132.00 at CZ and 140.00 at Starline the last used I bought was 70.00 but that was a good deal.

I have a new Dawson 9 mm,38 ,40 extended it is 2.339

I ordered one today I will let you guys know what I think about it when I get it.I'm no expert but I will try to give some impute. Joe

Matt, Thanks for the info I'm going to call Manny about ordering one Your info and pictures were great, Joe

I have a Ghost and don,t like the cheesey safety lever and plastic screws for ajustments.I was going to get a DAA but they have issues to.This looks like what I need could someone leave some more feed back.I am interested in one of these it looks good I like the rollers.

My 550 with a Unique Tek clamped tool head and a Redding micrometer seating die loading 38 super comps I get + - .002 on 90% of 100 shells and + - .003 on the other 10% and I am happy with that. With the factory dillon head and seating die I got + - .006 and sometimes a little more.So these upgrades on my press helped and I feel were worth the extra money.Just my 2 cents I didn't think + - .006 was acceptable

Sinclair makes the one I have it folds up and has a optional cover for a rainy day.Its under Benchrest Range Cart

My Razor Cat is going to ship Friday it's on its way to be hard chromed Johnny sent me some pictures yesterday it looks good can't wait Joe

That is also good to know I never thought of that but 2" could give me a little more room.Thanks again Joe

Thanks Sarge that is what I was hoping I only have 48" Dillon says the press is 44" high and the strong mount is 6.5" that is 50.5" so they must be figureing working height I will still have room to get cases in the casefeeder with 7" of room. Thanks again for the reply Joe

Could someone measure the actual total height of a 650 with the case feeder and the 650 (6.5 ") strong mount to see if I have room for one on my bench,Thanks Joe

I had the same problem called Brian and he told me about tightening the lock nuts with the shellplate full and the handle down my oal went from .008 to .004 average difference. I think I,m going to repeat it and see if it gets a little better,Thanks Brian, Joe

I would take a majic marker and put a line or mark on top of the bullet or case at 12 o'clock in the mag them cycle it and see if it is denting it on the top bottom or side and narrow down the problem to what is causing it. Could help, Joe

I use the big Dillon on my 550 I had some left over from the 1050 I use to have they hook right on my strong mount finish shell bin holder

For a single stage press what shell holder do I use.In the forums they say 223 that is fine for a Dillon shell plat but for a single stag that does not work .378.Does anyone make one for a 38 Super Comp .387 a Luger #19 will work but it is a little big .394