Jerome

I had the Springer forward mount. I had a few jams until I replaced the extractor to the Lone Wolf one. When my SRO went out and i got it replaced, I got the newer, further back mount. It has been working fine.

BlueBullets seems to be still backed up but BBI is shipping fast. BlueBullets shipped my order yesterday. So I'll have it right around 5 weeks after ordering. I got a bit anxious a few weeks ago and ordered from BBI. Ordered on Sunday and they shipped on Monday.

I thought about doing this as well. I searched trigger shoe in the rule book and only found that they cannot extend beyond the width of the trigger guard. 5.1.5

I might have been able to get 23 but 22 was tight with the stock spring and followers. I always ran 21 at matches. Out of curiosity, have you gauged your mags? To fit the gauge, I had to do a bit of filing on the ones with TTI bases and the one I have with a Springer Base.

I just added Grams springs and followers to my mags with TTI base pads. One holds 23 comfortably and one is a bit tight. Today I live fire tested starting and reloading 23 +1 a couple of times and they ran fine. I do use the heavier recoil spring ( 14,15lb?) and 130pf ammo. I will do more testing before considering using in a match. However, More important is Lowsc3 bringing up that it may "easily bend the ejector". Yes, that's a hugh concern I didn't consider.

I have a P320rx with an X5 grip. Then I got an X5Legion. I liked the Legion better right off the bat. I liked the additional weight mostly. However, twice I've had to switch to the RX in a match. I was worried since I only practice with the Legion. But, both times, I was very surprised that it didn't matter. Although I could feel the weight difference, they shot the same. I can't say it made a bit of difference in the match. That said, if I didn't have the Legion, I would have put the XTG grip on the RX. Just because I like to fiddle. So...

I was born and raised in Texas surrounded by family and friends that are gun enthusiasts, mostly hunters and defensive carriers. Up until 6-7 years ago, I (nor anyone I know) had never heard of games like USPSA or IDPA or Steel Challenge. Coastal Bend Shooters (CBS) has a monthly USPSA and Steel Challenge match in Corpus. https://practiscore.com/clubs/coastal-bend-shooters-gc08/matches I believe there is a USPSA club or two in the valley but have not shot there. Try Pharr Action Shooters Club - Edinburg, TX https://pharrgunclub.org/events/ South Texas Tactical - Brownsville, TX

Check that the Toolless Guide Rod is not touching the comp. Mine was at one time causing the issue you are having.

They offer a tuned(?) trigger EPT version on lowers. I'm wondering if it is worth it or resign to adding an improved one. Hyper Fire? ---------- The PSA EPT trigger starts with a polished mil-spec style single stage trigger assembly and micro-polishes the contact surfaces. The trigger then gets an electroless nickel coating to assist in wear resistance and lubricity. The result is a very satisfying single stage trigger. -------------------------------

Do you know which lower he selected? How was the trigger?

That was an interesting stage start. It seems like a no brainer that the door must to be closed. That is the way the stage was designed and reset by the RO before each shooter. A shooter can't go around changing the stage at the "Make Ready" command. Or can he...

Yep decisions, decisions. So many Divisions, so many guns, so little time, so little money. You need to retire and shoot full time. Larry sold the X5 this morning.

Chris, There is a reason why PCC is much more popular than Carry Optics so far. PCC shooters have much more fun. Now you take a Production shooter like yourself that turns to PCC - with all those rounds in a gun it must be like pure joy - what heaven feels like. Good luck.

I've purchased several guns from this Sig Dealer plus use his FFL services. He shows one in stock. http://www.gunwurkz.com/itemsforsaleSigSauer.php

From NROI - my note included these images I posted above. ---------------------------------------------------------------------------------------------- "There is no prohibition in the rules against internal beveling and smoothing, only against external flaring of the mag well. The changes you note are not considered to be external flaring." Troy ---------------------------------------------------

Yes, their help system was a bit funky. I don't have my iPad handy but I thought I remember that there were videos within the APP which were very helpful. They have all the videos on their youtube channel as well: https://www.youtube.com/user/ShotCoachApp/videos

I contacted Vortex about the 6MOA Venom and they said a few months. Their website shows "Spring 2017" http://www.vortexoptics.com/product/venom-red-dot-6-moa-dot Here is window size data I took off another post on BE. Some I verified others I have not. So, verify before purchasing.: RTS2: 25mm w x 22mm h Vortex Razor: 28mm x 17.5mm Vortex Venom: 26.4mm x 16.0mm Vortex Viper: 24mm x 17.5mm Leupold Deltapoint Pro: 25.7mm x 17.5mm Burris FastFire 3: 21mm x 15mm RMR: 22mm w x 16mm h c-more slideride: 29mm Sig Romeo 3: 25mm wide x 21mm h Sig Romeo 1: 30mm wide x 16mm h J point: 21.5mm w x 15mm h Doctor: 21mm x 15mm

Do you need the app on your iphone and iPad? If you can move videos from one device to the other, you don't need the app on both devices. You can use the app on the iPad to edit and analyze video from any source as long as you can get the video onto the iPad. Do you record thru the app or just as regular video? Both. You can use the App to record or transfer a video taken via your iPhone's or iPad's regular camera system. I transfer videos from my PC to iPad using Dropbox.

Here are my results using Prima V for the first time. CZ 75 Shadow 9mm 147gr SNS Flat Point .356 Mixed Cases, WSP Primer - Also tested Tula Primers and got same results. OAL 1.145 3.2g Prima V - Batch # PB16055 Avg 849 FPS 124 PF (124.8) SD 8.03 ES 32 High 862 fps / 126pf Low 830 fps / 122pf I'll bump up to 3.4. I normally load using VV N320. 3.3gr gives me 894 fps / 132pf with the same bullet and OAL.

Just a little. The back of the lips touched the gauge a little and there was a little light where the back of the mag should touch the gauge. Hardly noticeable. Yours might fit. as is.

Maybe there should be an online course plus local certification by a local CRO or RM. The local part could take place at a local match or two. Maybe some pre-match instruction then during match observation and instruction. One could get certified pretty much anytime there is a match and CRO or RM available.

How far off was it from your bore sighting?

This is what I've tried in order... Sig P320RX Romero 1 - I liked the large screen. However, the 3 MOA dot, although nice and bright, was too small for me. Burris FastFire III - I had my CZ Shadow Slide Milled for the FFIII. I liked the 8 MOA dot better than 3 MOA but it may be a bit too large - or the window is too small. I prefered the larger window of the Romero1. Vortex Viper 6 MOA - I wanted to try a dot with a larger window and a slightly smaller dot. However, I had to select a unit that fit my slide (milled for the Burris FF III) so I got a Viper. So far, I like the Viper's 6 MOA dot and the larger window (over the FF III). But I was surprised at how much I REALLY like the lower profile of the Viper. If I bring the gun up and see the slide, I know it's a very small move down to get the dot. The FastFire III rides higher, if the dot doesn't come up, I have a harder time fishing for it. The wider screen on the Viper has eliminated the dot being lost to the side for me (so far). Of course, I just got the Viper, dry fired with it once and shot it at range once, so, I'm still testing. But, so far, Viper is the winner... for now. One downside of the Viper is that you have to remove it from the slide to change the battery. I thought about waiting for the Venom in 6 MOA as it has an even wider window but it is a bit shorter but I'm not very patient. It also has a wider window which is good but not as tall as the Viper.

Yes, the Taran Tactical TTI +2 CZ Base Pad (CZBP940-00) with the 18 round CZC tube does fit the gauge. I bought it because CZC was out of stock on their base. The website I bought it from did say it would fit the gauge. I did have to file the back lips on the tube a tiny bit.

You can also use the Taran Tactical TTI +2 CZ Base Pad (CZBP940-00) with the 18 round CZC tube. - 23+1 with the CZC Spring/Follower kit And Stuart just mentioned a new base pad CZC has for the 17 round tube in production.